Hello,
I'm trying to set up port forwarding in IPTABLES and so far it's working
great from the internet, but when I attempt from my internal LAN using the
External IP address, it fails.
EXTIF="eth0"
INTIF="eth1"
EXTIP="xxx.xxx.xxx.xxx"
INTNET="192.168.1.0/24"
INTIP="192.168.1.1"
PORTFWIP="192.168.1.13"
>From the internet, if I type in http://xxx.xxx.xxx.xxx:81 it works.
When use a computer on my LAN and type in http://192.168.1.13:81 it works.
However, when i type in from a computer on my LAN: http://xxx.xxx.xxx.xxx:81 it
does not.
Any ideas? Thanks in advance.
Mike
###############################################################################
#
# rc.firewall-2.4-stronger
#
FWVER=0.74s-4
echo -e "\nLoading STRONGER rc.firewall - version $FWVER..\n"
IPTABLES=/sbin/iptables
LSMOD=/sbin/lsmod
DEPMOD=/sbin/depmod
INSMOD=/sbin/insmod
GREP=/bin/grep
AWK=/bin/awk
SED=/bin/sed
IFCONFIG=/sbin/ifconfig
EXTIF="eth0"
INTIF="eth1"
echo " External Interface: $EXTIF"
echo " Internal Interface: $INTIF"
echo " ---"
# For users who wish to use STATIC IP addresses:
EXTIP="xxx.xxx.xxx.xxx"
echo " External IP: $EXTIP"
echo " ---"
# Assign the internal TCP/IP network and IP address
INTNET="192.168.1.0/24"
INTIP="192.168.1.1"
echo " Internal Network: $INTNET"
echo " Internal IP: $INTIP"
echo " ---"
UNIVERSE="0/0"
echo " - Verifying that all kernel modules are ok"
$DEPMOD -a
echo -en " Loading kernel modules: "
#Load the main body of the IPTABLES module - "ip_tables"
# - Loaded automatically when the "iptables" command is invoked
#
# - Loaded manually to clean up kernel auto-loading timing issues
#
echo -en "ip_tables, "
#
#Verify the module isn't loaded. If it is, skip it
#
if [ -z "` $LSMOD | $GREP ip_tables | $AWK {'print $1'} `" ];
then
$INSMOD ip_tables
fi
#Load the IPTABLES filtering module - "iptable_filter"
#
# - Loaded automatically when filter policies are activated
#Load the stateful connection tracking framework - "ip_conntrack"
#
# The conntrack module in itself does nothing without other specific
# conntrack modules being loaded afterwards such as the
"ip_conntrack_ftp"
# module
#
# - This module is loaded automatically when MASQ functionality is
# enabled
#
# - Loaded manually to clean up kernel auto-loading timing issues
#
echo -en "ip_conntrack, "
#
#Verify the module isn't loaded. If it is, skip it
#
if [ -z "` $LSMOD | $GREP ip_conntrack | $AWK {'print $1'} `"
]; then
$INSMOD ip_conntrack
fi
#Load the FTP tracking mechanism for full FTP tracking
#
# Enabled by default -- insert a "#" on the next line to deactivate
#
echo -e "ip_conntrack_ftp, "
#
#Verify the module isn't loaded. If it is, skip it
#
if [ -z "` $LSMOD | $GREP ip_conntrack_ftp | $AWK {'print $1'}
`" ]; then
$INSMOD ip_conntrack_ftp
fi
#Load the IRC tracking mechanism for full IRC tracking
#
# Enabled by default -- insert a "#" on the next line to deactivate
#
echo -en " ip_conntrack_irc, "
#
#Verify the module isn't loaded. If it is, skip it
#
if [ -z "` $LSMOD | $GREP ip_conntrack_irc | $AWK {'print $1'}
`" ]; then
$INSMOD ip_conntrack_irc
fi
#Load the general IPTABLES NAT code - "iptable_nat"
# - Loaded automatically when MASQ functionality is turned on
#
# - Loaded manually to clean up kernel auto-loading timing issues
#
echo -en "iptable_nat, "
#
#Verify the module isn't loaded. If it is, skip it
#
if [ -z "` $LSMOD | $GREP iptable_nat | $AWK {'print $1'} `"
]; then
$INSMOD iptable_nat
fi
#Loads the FTP NAT functionality into the core IPTABLES code
# Required to support non-PASV FTP.
#
# Enabled by default -- insert a "#" on the next line to deactivate
#
echo -e "ip_nat_ftp"
#
#Verify the module isn't loaded. If it is, skip it
#
if [ -z "` $LSMOD | $GREP ip_nat_ftp | $AWK {'print $1'} `" ];
then
$INSMOD ip_nat_ftp
fi
echo " ---"
#Clearing any previous configuration
echo " Clearing any existing rules and setting default policy to
DROP.."
$IPTABLES -P INPUT DROP
$IPTABLES -F INPUT
$IPTABLES -P OUTPUT DROP
$IPTABLES -F OUTPUT
$IPTABLES -P FORWARD DROP
$IPTABLES -F FORWARD
$IPTABLES -F -t nat
#Not needed and it will only load the unneeded kernel module
#$IPTABLES -F -t mangle
#CRITICAL: Enable IP forwarding since it is disabled by default since
#
# Redhat Users: you may try changing the options in
# /etc/sysconfig/network from:
#
# FORWARD_IPV4=false
# to
# FORWARD_IPV4=true
#
echo " Enabling forwarding.."
echo "1" > /proc/sys/net/ipv4/ip_forward
# Flush the user chain.. if it exists
if [ -n "`$IPTABLES -L | $GREP drop-and-log-it`" ]; then
$IPTABLES -F drop-and-log-it
fi
# Delete all User-specified chains
$IPTABLES -X
# Reset all IPTABLES counters
$IPTABLES -Z
#Configuring specific CHAINS for later use in the ruleset
#
# NOTE: Some users prefer to have their firewall silently
# "DROP" packets while others prefer to use "REJECT"
# to send ICMP error messages back to the remote
# machine. The default is "REJECT" but feel free to
# change this below.
#
# NOTE: Without the --log-level set to "info", every single
# firewall hit will goto ALL vtys. This is a very big
# pain.
#
echo " Creating a DROP chain.."
$IPTABLES -N drop-and-log-it
$IPTABLES -A drop-and-log-it -j LOG --log-level info
$IPTABLES -A drop-and-log-it -j DROP
echo -e "\n - Loading INPUT rulesets"
#######################################################################
# INPUT: Incoming traffic from various interfaces. All rulesets are
# already flushed and set to a default policy of DROP.
#
# loopback interfaces are valid.
#
$IPTABLES -A INPUT -i lo -s $UNIVERSE -d $UNIVERSE -j ACCEPT
# local interface, local machines, going anywhere is valid
#
$IPTABLES -A INPUT -i $INTIF -s $INTNET -d $UNIVERSE -j ACCEPT
# remote interface, claiming to be local machines, IP spoofing, get lost
#
$IPTABLES -A INPUT -i $EXTIF -s $INTNET -d $UNIVERSE -j drop-and-log-it
# external interface, from any source, for ICMP traffic is valid
#
# If you would like your machine to "ping" from the Internet,
# enable this next line
#
#$IPTABLES -A INPUT -i $EXTIF -p ICMP -s $UNIVERSE -d $EXTIP -j ACCEPT
# remote interface, any source, going to permanent PPP address is valid
#
#$IPTABLES -A INPUT -i $EXTIF -s $UNIVERSE -d $EXTIP -j ACCEPT
# Allow any related traffic coming back to the MASQ server in
#
$IPTABLES -A INPUT -i $EXTIF -s $UNIVERSE -d $EXTIP -m state --state \
ESTABLISHED,RELATED -j ACCEPT
# DHCPd - Enable the following lines if you run an INTERNAL DHCPd server
#
$IPTABLES -A INPUT -i $INTIF -p tcp --sport 68 --dport 67 -j ACCEPT
$IPTABLES -A INPUT -i $INTIF -p udp --sport 68 --dport 67 -j ACCEPT
## FTP
# Allow ftp inbound:
$IPTABLES -A INPUT -i $EXTIF -p tcp --dport 21 -m state --state NEW,ESTABLISHED
-j ACCEPT
#
# Now for the connection tracking part of ftp. This is discussed more completely
in my section
# on connection tracking to be found here.
# HTTPd - Enable the following lines if you run an EXTERNAL WWW server
#
echo -e " - Allowing EXTERNAL access to the WWW server"
$IPTABLES -A INPUT -i $EXTIF -m state --state NEW,ESTABLISHED,RELATED \
-p tcp -s $UNIVERSE -d $EXTIP --dport 80 -j ACCEPT
# Catch all rule, all other incoming is denied and logged.
#
$IPTABLES -A INPUT -s $UNIVERSE -d $UNIVERSE -j drop-and-log-it
echo -e " - Loading OUTPUT rulesets"
#######################################################################
# OUTPUT: Outgoing traffic from various interfaces. All rulesets are
# already flushed and set to a default policy of DROP.
#
# loopback interface is valid.
#
$IPTABLES -A OUTPUT -o lo -s $UNIVERSE -d $UNIVERSE -j ACCEPT
# local interfaces, any source going to local net is valid
#
$IPTABLES -A OUTPUT -o $INTIF -s $EXTIP -d $INTNET -j ACCEPT
# local interface, any source going to local net is valid
#
$IPTABLES -A OUTPUT -o $INTIF -s $INTIP -d $INTNET -j ACCEPT
# outgoing to local net on remote interface, stuffed routing, deny
#
$IPTABLES -A OUTPUT -o $EXTIF -s $UNIVERSE -d $INTNET -j drop-and-log-it
# anything else outgoing on remote interface is valid
#
$IPTABLES -A OUTPUT -o $EXTIF -s $EXTIP -d $UNIVERSE -j ACCEPT
# DHCPd - Enable the following lines if you run an INTERNAL DHCPd server
# - Remove BOTH #s all the #s if you need this functionality.
#
$IPTABLES -A OUTPUT -o $INTIF -p tcp -s $INTIP --sport 67 \
-d 255.255.255.255 --dport 68 -j ACCEPT
$IPTABLES -A OUTPUT -o $INTIF -p udp -s $INTIP --sport 67 \
-d 255.255.255.255 --dport 68 -j ACCEPT
# Catch all rule, all other outgoing is denied and logged.
#
$IPTABLES -A OUTPUT -s ! $EXTIP -d $UNIVERSE -j drop-and-log-it
echo -e " - Loading FORWARD rulesets"
#######################################################################
# FORWARD: Enable Forwarding and thus IPMASQ
#
echo "Enabling PORTFW Redirection on the external LAN.."
# This will forward ALL port 81 traffic from the external IP address
# to port 81 on the 192.168.1.13 machine
#
# Be SURE that when you add these new rules to your rc.firewall, you
# add them before a direct or implemented drop or reject
PORTFWIP="192.168.1.13"
# Allow forwarding of new and existing port 81 connections
#
$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -p tcp --dport 81 -m state --state
NEW,ESTABLISHED,RELATED -j ACCEPT
# Enable PORTFW of this port 81 traffic
#
$IPTABLES -t nat -A PREROUTING -p tcp -d $EXTIP --dport 81 -j DNAT --to
$PORTFWIP:81
echo " - FWD: Allow all connections OUT and only existing/related
IN"
$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED \
-j ACCEPT
$IPTABLES -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT
# Catch all rule, all other forwarding is denied and logged.
#
$IPTABLES -A FORWARD -j drop-and-log-it
echo " - NAT: Enabling SNAT (MASQUERADE) functionality on $EXTIF"
#
#More liberal form
#$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE
#
#Stricter form
$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j SNAT --to $EXTIP
#######################################################################
echo -e "\nStronger rc.firewall-2.4 $FWVER done.\n"
