similar to: :: BIOS Motherboard Settings ::

Thanks Mark will try that out! -----Original Message----- From: MF Hulber [mailto:asterisk-admin@hulber.com] Sent: 22 March 2005 05:25 To: Reuben Grech Subject: [info] [Asterisk-Users] :: BIOS Motherboard Settings :: I have the same motherboard. I put the card in the 2nd slot from the bottom. In this slot, if you look at the manual, it will possibly be in conflict with some USB channels. I

I'm about to build a server. I want to use a P4, and have lotsa RAM, I don't need audio, I do want to do RAID, but I'll do software RAID if hw isn't available for IDE. the RH hardware list seems rather woefully out of date, does anyone have any recommendations for a good motherboard guaranteed to work? I'm looking at ASUS P4P800-E-deluxe which has a driver on the ASUS site

I'm looking at deploying a new set of servers based around Intel P4 800MHZ FSB processors. Currently I'm looking at the following 2 motherboards and I'm wondering how well supported they are under -STABLE (specificaly the ATA and LAN as well as text mode video) Model Chipset ASUS P4P8X Intel 865P ASUS P4P800 Intel 865PE Also I'm looking for recommendations on Dual Xeon

Hello Hamish. I found your message just googling for Suse and sk98lin. Did you solve your problem? I had the same case and only way to restore was to change NIS driver speed settings from AUTO to 10Mb. And it was not related to OS as the same problem is in WXP ( I have dual boot, ASUS P4P800, integrated GB NIS ). Oleg.

Hello all, I tried sending this message to freebsd-config and freebsd-install, after subscribing to them, but no one answered back... so I am posting my question here. I just downloaded ISO images for 4.8-RELEASE, and prepared them for installation on an brand new ASUS P4P800-based computer. More information about this motherboard and integrated peripherals list, can be found here:

Hi, I would like to boot a LINUX system from an external USB Hard Drive. Motherboard (ASUS P4P800) supports boot from USB with or without floppy emulation. Is it possible to use syslinux for booting without any floppy or CD, just from the external USB drive? Regards... Bela

I have read thru what other users have tried in this list when they have experienced seemingly similar issues to what I have, without success. I suspect there might be an issue regarding both the X100P and TDM04b cards being used in an Intel SE7525GP2 motherboard, as I had to even wait for a BIOS update from Intel in order to utilize my 3ware 9500 SATA raid controller on it (3ware Kb -->

Hi everybody, I failed to make Samba 3.0.0 /3.0.2a working from Windows side on the slightly different Slackware?s. Last try was the ?current? Slackware version(kernel 2.4.25) of some March 20?s with Samba 3.0.2a in it. Server: Asus P4P800-PIV?RAM 1.5(1)Gb- 3Com 3C940 integrated. Client(s): W2k SP3, Realtek 8139 NIC. Installed OK (binaries from a distribution?), user added OK after

Hi, I have a 1 port T1 card in an asus p4p800-vm board with a 2.0g Celeron, and 512m of 266mhz ram (256 on each channel). This board has video, Ethernet, and serial ata all on-board, I got it because of that, there wouldn't be anything else on the pci bus that would mess with the zaptel card(s). So, here's my problem. I'm running redhat 9 with kernel 2.4.20-20.9. I can load the

Dear List, This is my second post since I did not receive any answers the first time. I have P4P800-VM motherboard with serial ata controlers (ICH5) and serial ata discs. I managed to install FreeBSD 4.9-STABLE on this box when setting the IDE controller in legacy mode. Everything works normal except when booting, the drives are set into UDMA33 mode: atapci0: <Intel ICH5 SATA150

The update worked like a charm! Hold music is as cheesy as ever! Thanks much, this list is a life saver! Dan ------------------------------ Message: 2 Date: Fri, 18 Mar 2005 09:16:59 -0600 From: Eric Wieling <eric@fnords.org> Subject: Re: [Asterisk-Users] Redhat 9 Music on hold To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com>

What about the Asus M2N-SLI Deluxe motherboard? It has 7 SATA ports, supports ECC memory, socket AM2, generally looks very attractive for my home storage server. Except that it, and the nvidia nForce 570-SLI it''s built on, don''t seem to be on the HCL. I''m hoping that''s just "yet", not reported yet. Anybody run Solaris on it? Or at least on any

I've gone through about 5 computers and two linux distros (wbel and fc3) trying to get a system that doesn't show symptoms of frame slips, can receive faxes, and doesn't show CPU spikes with the tdm400p active. Unfortunately I haven't had much luck. I asked Digium whether there was a recommended hardware platform, and the best they could come up with was a Dell 600SC - but they

Have someone experience with the model-aircraft simulator Aerofly Prof. deluxe? Get someone them running? Thanks for your help joerg -- Super-Acktion nur in der GMX Spieleflat: 10 Tage f?r 1 Euro. ?ber 180 Spiele downloaden und spiele: http://flat.games.gmx.de

Sure: https://www.reub.net/files/dovecot/lightning-dovecot.conf https://www.reub.net/files/dovecot/thunderstorm-dovecot.conf Updated nightly. Reuben On 1/09/2018 12:26 am, Aki Tuomi wrote: > Can you provide doveconf -n? > > > > --- > Aki Tuomi > Dovecot oy > > -------- Original message -------- > From: Reuben Farrelly <reuben-dovecot at reub.net> >

This is bit of a longshot, but can you try applying https://github.com/dovecot/core/commit/63a74b9.patch and see if this helps? Aki On 19.09.2018 10:33, Reuben Farrelly wrote: > glibc-2.28. > > There was a posting by Michael Marley on 31/08 saying he saw something > similar to this problem after upgrading to 2.28 as well with 'doveadm > purge'. > > Reuben > >

Can you provide your /etc/nssswitch.conf? Aki On 19.09.2018 10:40, Reuben Farrelly wrote: > I've been running with this almost identical patch already for some time: > > diff -up dovecot-2.3.0.1/src/auth/mycrypt.c.libxcrypt > dovecot-2.3.0.1/src/auth/mycrypt.c > --- dovecot-2.3.0.1/src/auth/mycrypt.c.libxcrypt?????? 2018-02-28 > 15:28:58.000000000 +0100 > +++

Which glibc version are you using? Aki On 19.09.2018 09:39, Reuben Farrelly wrote: > Hi Aki, > > How did you go with this in the end?? Do you need anything more from > me or were you able to reproduce this? > > Thanks, > Reuben > > On 1/09/2018 12:41 am, Reuben Farrelly wrote: >> Sure: >> >> https://www.reub.net/files/dovecot/lightning-dovecot.conf

https://bugs.freedesktop.org/show_bug.cgi?id=71620 Priority: medium Bug ID: 71620 Assignee: nouveau at lists.freedesktop.org Summary: nouveau_fence_wait_uevent NULL pointer dereference Severity: normal Classification: Unclassified OS: Linux (All) Reporter: kdatanasov at gmail.com Hardware: x86-64 (AMD64)

I have no idea why it's returning invalid argument, maybe you need to raise this as issue with glibc? Aki On 19.09.2018 10:43, Reuben Farrelly wrote: > Sure: > > thunderstorm ~ # cat /etc/nsswitch.conf > # /etc/nsswitch.conf: > # $Header: > /var/cvsroot/gentoo/src/patchsets/glibc/extra/etc/nsswitch.conf,v 1.2 > 2017/08/12 16:21:44 slyfox Exp $ > > passwd:?????