similar to: echo paid support

Good Day all, I have a Fractional PRI connected to my Asterisk Box via a T100P card. When I initiate a call out to phone number 123-8888 the call sounds great no echo what so ever. If the person at 123-8888 hangs up and calls me right back (same handset on both sides) same trunk line The call always has echo on it. The Asterisk sip extension hears them selves echoing. The remote party

Hi, I'm thinking of purchasing a TDM400P card and was wondering if anyone has experienced any echo issues with phones off these cards connecting to the PSTN via the X100P cards? I have had my fingers burnt with a Voip phone > X100P. Cheers, Taff. --------------------------------- ALL-NEW Yahoo! Messenger - sooooo many all-new ways to express yourself -------------- next part

Good day again Daniel, So the first thing I did was to remove the >NUL for your XMSDSK line and put a PAUSE after it in AUTOEXEC.BAT. That way, I could see the error message: *** XMS RAMdisk v1.9I (FU - 08/98): XMS get free mem error. Then I noticed that if you run AUTOEXEC.BAT manually from the DOS CLI, XMSDSK actually succeeds! So that led to a new test: Duplicate the XMSDSK line. ...

Any help on this would be great I have 2 TDM400P's, 2 asterisk servers (running on powerful boxes with FC1 and * v CVS 1.0.02), and 4 analogue PSTN lines from BT and whatever I do, I cannot get rid of this damn local echo. Ive tried setting the echoTraining, echoCancel (in phone.conf and Zapata.conf) , echocancelwhenbridged to every possible combination , Ive even tried running the fxotune

Good day to you, too. No worries about the delay. I understand how busy everyone is with SYSLINUX. Gladly, the project continues to develop and improve. With that said, thanks for today's flurry of activity regarding my reported problem. Impressively, the debug version of MEMDISK that you had directed me to use appears to have done the trick. Results below. command line:

Hello all. Again I call upon the greats of this mailing list to help me with an issue related to MEMDISK - notably when paired with various Dell OptiPlex and Latitude systems. The issue presented itself sometime ago and I best dealt with it by remaining with version 3.83 of the SYSLINUX package. But valuing the improved changes fostered by newer versions, I would prefer to move forward with

A kind request for help please. MEMDISK is causing an issue with the Dell OptiPlex GX280 and GX620 platforms. Booting a PC-DOS/Ghost, disk image is successful (and proper) when using version 3.83. See results below: MEMDISK 3.83: Ramdisk at 0x07eeaa00, length 0x007bc000 command line: initrd=images/ghostclient/280_620/osbootc.img BOOT_IMAGE=memdisk MEMDISK: Image seems to have fractional end

Hello, =20 Something wrong happens when I use the seq (function). Here it is an exampl= e from my R console, I have the R version 2.7.2 (2008-08-25) running on Mic= rosoft windows XP Version 2002 Service Pack 3, and my machine is a Dell Opt= ilex GX280 with a processor Intel Pentium 4 CPU 2.80GHhz, 0.99 GB RAM: =20 =20 >r=3Dseq(0.150,0.180,0.001) =20 > r[16] =20 [1] 0.165 =20 >

Hello list! I'm tearing my hair out over this. I have a USB flash drive that has been working nicely with SYSLINUX for about a year, and I have upgraded SYSLINUX on it a couple of times during that period with no ill effects - including a complete format/re-install from scratch. However, on Friday I was using this drive (and it was working) and I decided to upgrade to the latest version

I installed the HEAD version of Asterisk on January 24 and ever since then I have a really bad echo problem. I have tried to go back to the stable version, but it won't install. Anyone else having this trouble? Suggestions? Thanks, Brian Here are what I believe to be the pertinent details of ZAPATA.CONF. [channels] echocancel=yes echocancelwhenbridged=yes echotraining=yes rxgain=0.0

I finally got my X100P working and now I have a question. I have several Skutch phone line simulators. My X100P works as expected with both a POTS line and an analog PBX port, but when I use a phone line simulator it doesn't answer the line. The phone line simulator doesn't power the line until the phone set goes offhook. Asterisk shows the RED alarm and then the alarm clearing but never

Hello all. I am pretty new to this list but I have looked through the archives and did not see any reference to this problem. I have an MS-DOS boot floppy image that I am trying to load using MEMDISK. The disk is simply a boot floppy made using XPSP2. I have tried it on 4 different machines, all Dells. PowerEdge 2650 Server, Latitude D610 Notebook, Optiplex GX280 Desktop and Optiplex GX520

Hello, I''m trying to build XenLinux 2.4.30 on debian. I get the following error for make linux24 make[2]: *** No rule to make target `skbuff.c'',needed by `/usr/src/xen-2.0/linux-2.4.30-xen0/include/linux/modules/skbuff.ver''. Stop. Could somebody help me resolve this error. Or if this is some problem with the system configuration that I''m using, could

Hi, I am trying to build llvm 3.4.2 on Centos 6.6. I am getting this below build error , while building the libcxx. I followed the build procedure based of http://clang.llvm.org/get_started.html. I cannot move to a higher version, Since we need to develop on CentOS 6.6 and LLVM 3.4.2 ,is the last version that supports gcc 3.4.2. Starting from LLVM 3.5.0, there has been a huge jump to gcc 4.7.0.

Has anyone got this annoying sidecar to illuminate when users are on the phone? In my function key settings I have: Context: Active Type: Extension Number: <sip:4000@serve.address.com;user=phone> (4000 is the extension I want to see/dial on the key). I can press the key and it will dial the extension, it just won't illuminate when the user is on the phone or on DND Since I have

Hello my friends, I'm very worry about a problem i'm having...my asterisk got freez some times, every 5 or 6 days with NO trace in /var/log/asterisk/messages What i want to know is if safe_asterisk has something to be with this? This is what i have on my server: [root at mypbx ~]# ps -A | grep asterisk 9118 ? 00:01:30 asterisk [root at dreampbx ~]# ps aux | grep asterisk root

Hello. We've been using a very old version of SYS-/PXELINUX, 3.36, going by the proven "if it works, don't break it" philosophy. We us it mostly to load floppy disk images to kick off OS installations. Unfortunately we've recently had some PXE menu problems (USB keyboard stopped working) for a certain Fujitsu PC model, and decided to upgrade to the latest version, i e 3.84.

Hi Jack, I'm almost there with Android..... I've actually got the static and dynamic libraries built. I'm choking on the test suite. Do you want to take a shot at working around Android and [embedded, lame] STLport? I would try removing the call to rend() in std::map<_Key, _Tp, _Compare, _Alloc>::rend(). But I really should not modify program code. Fiddling with a Makefile is

I'm using bristuffed Asterisk with ISDN/ZAPHFC I have VERY ugly (outgoing) sound through ISDN/HFC if echocancel=yes in zapata.conf, but without echocancel I have bad (incoming) echo Through PSTN/FXO sound is ok with or without echocancel. I tried other echo cancellers (in zconfig.h) two times: ECHO_CAN_KB1 (this was default) ECHO_CAN_MARK2 ECHO_CAN_MG2 after any change I compiled (make

Is this a relevant location to provide information about what I believe is a compiler bug in clang? If not, please forgive me for posting it here. (Perhaps you can redirect me to some place more appropriate.) If so, here are the details: I have a short 15-line C++ program using only one standard header that clang fails to compile properly under C++11 with the new standard library (although the