similar to: TxFAX problem

I'm getting the following when sending to a specific fax machine. Any ideas? File name is '/var/spool/asterisk/email2fax/7F2SOeYJiU.tif' Changed from phase 0 to 2 Slow carrier up Slow carrier down Slow carrier up <<< NSF: 20 00 00 11 80 00 8a 49 10 53 54 49 52 4c 49 4e 47 20 43 4f 56 49 4e 47 54 00 67 00 80 80 80 0c 01 02 NSF without final frame tag The remote is made by

Hello folks! I'm trying yo set up a email2fax and fax2email on my asterisk box. The rxfax works fine in my setup. The problem is with the txfax. I have tryed all snadsp version (0.0.2x and 0.0.3x) but I get this errors. Because I can't find anything on Internet I'm hoping u can give me a hand. here are my logs: -- Attempting call on SIP/sip_provider/1234 for application

Hi list, Just installed spandsp. In my limiting testing, I have an issue on a Philips fax machine (HFC21) directly connected to my * server through TDM400, reception with rxfax works fine, but txfax always fails. Below is a transcript of failed transmit. This is with asterisk-1.0.3 (with native moh patch but I don't think it is the source of the problem). I already tried libtiff 3.5.7,

Hello, I have installed SpanDSP and the apps txfax an rxfax. Unfortunately I am having problems sending faxes. I only get cancelled transfers. I am trying to send a fax to a ISDN card connected to a zap channel. I am using following call file: ------------------------------- Channel: ZAP/g1/25 MaxRetries: 0 WaitTime: 20 Application: txfax Data: /tmp/lVD3wy.tiff|caller Asterisk shows:

Hi all!....i'm in course to implement Faxing in my asterisk box and for that I've installed all succesfully like libtiff and spandsp and next rebuild and reinstall asterisk modules, but when i call to Rxfax from dialplan nothing happens and i get some errors like "XCN with final frame tag In state 9" or a paper copy of a transmision report from the fax machine with COMMUNICATION

Hi, We are trying to use astfax (from Inter7) to send faxes directly from email accounts through *. The problem is that the fax machine answer the call when we test astfax (with the line in the README) and then it retries three or four times to send it, and hangup the channel. The fax is connected to a zap channel, and it has an extension configured for itself. This is an excerpt of the

Hello, I have bought a targeta quadbri. I want to realize a PBX server to send and to receive fax on lines BRI. I have installed asterisk and the drivers of quadbri (bristuff_0.2.0-RC7b). I downloaded and installed the module spandsp-0.0.2pre10 When i send a fax from the fax machine to asterisk, the application rx_fax saves the fax in a file on the hard disk. The problem comes when I try to send a

HI All. I'm using tiff-v.3.5.7 and spandsp-0.0.1k with latest * cvs on Slackware-10.0. Here is debug messages from * console. Please advise. Can receive fax Selected data signalling rate: V.29, 9600bps 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Minimum scan line time: 0ms Get at 9600 Changed from phase 3 to 5 Fast carrier up Training failed (sequence failed) Fast

Hi, I noticed a strange behaviour: Faxing using spandsp (TxFax) from my asterisk box to my old, common fax machine at home works fine. Faxing from the same box to my office pc-fax (Hylafax) also worke fine. Receveiving faxes on my asterisk box using spandsp (RxFax) also works fine. It is a PSTN number connected to the digium card of that asterisk box. Then I faxed from my asterisk box (TxFax)

Hi there, I'm Using TxFAX to send faxes via Zaptel PRI. I have 2 PSTN PRI Providers, with the first provider, all faxes are trasmited fine. With the second provider, faxes can't be sent, we suspect about the setting of this PRI provider, perhaps is doing some compression somewhere. Any suggestion welcome. I've tried these txfax calls with these results: txfax(${FAXFILE}): Fax

I'm losing call files in /var/spool/asterisk/outgoing because * isn't able to detect the busy signal. The call file looks like this: Channel: Zap/g2/3036701917 MaxRetries: 1000 RetryTime: 60 WaitTime: 45 Application: TxFAX Data: <filename>.tiff|caller Using the "|caller" parameter, TxFax injects the fax tone (CNG) onto the line. With the CNG tone, asterisk is unable

the attached log with verbose=6 and debug=6 refers. we've got a sangoma A104 (no hwec) with PRI ports 1 & 3 loopbacked to each other. we're trying to have txfax send out on one of those pri ports with rxfax listening on the other side, hence having asterisk send a fax to itself. we however have bad, and i mean really bad (<10%) success rates. we're currently using asterisk

Hi all, I'm using txfax and rxfax to send and receive faxes. I find that txfax performs very well when sending to an old fax machine. However, when trying to send to a Mac (OS X) that accepts faxes, I get a "Trainability test failed" message on the * console (full console log below). I'm OK with being unable to fax to Mac, as I'm just using it to test. For future

> AFAIK the current recommendation is to use HylaFax with something called iaxmodem. After having been through a lot of problems with RxFax and TxFax I completely agree with this statement. Allthough the initial configuration is a bit complicated, once you have this running you'll get far better reliability. Kind regards, Ardjan Zwartjes.

Hi, I've compiled rxfax and txfax on my Asterisk box. I've made a small extensions.conf for test so that when I call a number with my Idefisk softphone I activate txfax command. My goal is to try to send a fax using an analog line first and then an ISDN line but I do not know how to specify the channel inside txfax command. Sorry if it may sound a stoopid question but found no docs on

Hi, We have no problems sending to HP and Panasonic fax machines in the office. We do have problems when we try to send faxes to services supporting fax, i.e. J2 or our UC platform. The receiving side doesn't recognize fax. To send a fax we drop into /var/spool/asterisk/outgoing: Channel: Zap/g1/<fax number> MaxRetries: 0 WaitTime: 20 Context: webley_txfax Extension: txfax_ext

Hi Steve and all, 1. Faxing from asterisk back to the same asterisk (from one Zap channel to another) doesn't work for us. Txfax called with the 'caller' parameter issues CED, while the receiving side needs CNG in order to switch to fax extension with rxfax. 2. This is probably the reason why J2 and our UC don't recognize incoming fax. Thank you. Alex Zarubin Webley Systems

Hi, I read here in this mailing list about the debug info from txfax. I plaid a lot, but didn't get debug infos. I added the debug argument to txfax, I enabled debug in logger.conf, what else should I do? In which file or medium can I then expect the debug infos from txfax? Thanks for hints! Roger.

I'm want to send a fax, but its failing with "Unicall/XX event Far end disconnected" , right after the "Answer" command. Any tips? TIA, -- Paulo [extensions.conf]----------------8<------------------------- [txfax] exten => s,1,Set(TIMEOUT(digit)=5) exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds exten => s,n,Answer

Hi guys, I installed asterisk 1.4.17 and mISDN 1.1.7 with AGX addons to test the faxs. If I receive i do not have any problem, but i'm not able to send put any fax, i get always the same error: txfax_exec: transmission done with ast_read(chan) == NULL Anyone has txfax working with asterisk 1.4? I try to download app_rxfax.c and app_txfax.c with the asterisk.patch file but without success.