similar to: Open ports?

Hi folks. Thanks for having patience with a newbie... I am going through the setup exercise at http://chayden.net/Asterisk/SeUpAsteriskAtHome.htm I am trying to do it all on BroadVoice since this is just experimental, and the 100 minutes of outgoing from them should be enough for now. So I set up BroadVoice for both inbound and outbound, using a combination of the instructions referenced

I'm using Asterisk 1.0.4 with AMP and Broad Voice. I have that with only 5 XTen Lite phones. I'm able to call / etc with internal phones just fine. I can call outside Vonage Numbers, and other BroadVoice Numbers. I have vonage where I live (626) and can call that fine. However, other 626 numbers I get similar errors as below. However, everytime, I try to call cell phones, and or

Hello everyone, Well here is my initial posting to the list, and I will admit Asterisk is new to me. I just got everything running here a couple days ago, so still learning the ropes for sure. OK, here is my problem. Currently I have it setup talking to a couple Cisco IP phones, and some Xten softphones, this works great. I also got an account with FreeWorld Dialup using IAX2 and that

Hi All First time poster, long time reader. I just ran into something really bizarre. I've enabled videosupport and have been testing sip calls with Xten Eyebeam software, it works (mostly) However, when I have Videosupport=yes In the [general] section of my sip.conf, broadvoice calls fail w/ "We're sorry your call cannot be completed at this time" So... I've

I understand there has been some issues sending DTMF tone through Broadvoice. Can some provide me with symptoms? --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.700 / Virus Database: 457 - Release Date: 6/6/2004

Hello, Is there an utility for asterisk for codec conversion? I tried google but i haven' got anything. I am trying to initiate a call with G711 codec to asterisk and i would like asterisk to call a gateway with an g729 codec, therefore making a codec conversion from g711 to g729. I know chan_oh323 does it by specifying the OUT_CODEC variable, but chan_h323 does not. And i was wondering is

Okay, I just spent some time getting this done for a project. I documented the steps performed. Thanks to all of those who provided input. As time goes on, and people always have different settings, this may or may NOT work for you. ------------------------------------------------- Asterisk @ Home 0.4 HowTo William Pool (Puddle) 01-28-05 Description: Getting Asterisk @ Home to work with a

I just signed up for the BroadVoice service a few hours ago, but for the life of me I can't get any incoming voice. The incoming connection is fine as it rings my extension from outside, but I can't hear anyone talking. Outgoing voice is working fine though. I've been looking through the archives, but I haven't found a solution to the problem yet. I even tried another router

I have added the three lines to the sip.conf file based on the latest changes from broadvoice. I can receive incoming calls but cannot place any outgoing calls. The error I get is: *CLI> -- Registered to '69.73.19.178', who sees us as IPADDRESS:4569 -- Attempting call on SIP/Broadvoice/5068012 for application Playback(demo-congrats) (Retry 1) Mar 8 08:35:21 NOTICE[29290]:

Hello Folks- Pretty new to the list here, got a lot of reading to do.. Does anyone know where I can find a decent HOWTO or set of instructions for running Asterisk and SIP clients thru firewall/NAT systems? I have a Asterisk box sitting behind a linux firewall at a remote location and have the 5060 and etc ports open as well at 16381-16391 UDP open and routed to the Asterisk box as well. I have

Hi, I have two accounts with broadvoice. Now, I want to be able to distinguish between them. I though that this would be simple by adding "/EXTEN" at the end of the register statement. For example: register => num1:pass@sip.broadvoice.com/1000 Unfortunately, this is not working. When I call into my box I hear busy tone. My config looks like this: [root@voip asterisk]# cat sip.conf

I've tried everything with the * box after this weekend. I have read every document on the problems people are having with them after this weekend as well, but none of them address my problem. I checked my settings in my sips which I have below as well, I have changed the host file a few times, but this was new to me and I never had modified it before. I have and the same results

Hello, Have a weird problem when using asterisk (1.0.6). There are certain numbers I cannot dial when using asterisk with my broadvoice account. No problems with inbound. With outbound calls, I can call some numbers (for example broadvoice customer support number) and unsuccessfully with some. However, when I configure my account directly on x-lite, I dont see these outbound problems. Here is a

Hi all, I've been trying to use BroadVoice as a SIP service provider. They don't officially support * but are helpful when it comes to answering questions for setup parameters. They claim they have no firewalls or access lists that need to be set up so I can get access to their servers. However, something's still not quite right when I use the parameters. It looks like our Asterisk

Hello All, I'm just getting into *, and trying to use a Broadvoice account. It works inbound, but Outbound fails no matter what sip.conf parameters I try. From the recent posts here I think it could be: A bad CVS release - I will try to download and build from a new one Broadvoice not challenging and/or Asterisk not responding with an Authorization: in the INVITE header. I am

Hello, Please forgive me if I'm repeating this post. I have searched and looked for similar problem with a solution but have not see a similar one. My outgoing SIP and other channels work fine but the incoming/inbound SIP call goes straight to Broadvoice voicemail. I see that Broadvoice is registered when I look at the SIP registry. I have turned on SIP Debug and it is below. Anyone know

Hello all, When I call the Broadvoice number all is good. When I try to call out through DISA on my broadvoice line i get the following: Executing Dial("SIP/147.135.0.129-0815bc60", "SIP/16037862111@proxy.bos.broadvoice.com|30") in new stack -- Called 16037862111@proxy.bos.broadvoice.com -- Got SIP response 480 "Temporarily Not Available" back from

Egad, not again with Broadvoice! Anyhow, I recently installed AAH and configured my TDM11B and got that and some SIP phones working. I still have some issues to work out, etc, but my current problem is Broadvoice. I have checked out all of the online resources, including the recent list exchange about the recent changes made by Broadvoice. However, the one thing I have found to be consitent in

Is the Broadvoice service up? I just signed up with them and started receiving calls in no time but could not make calls. And after a few minutes I cannot even place calls. register => [number]:[password]@sip.broadvoice.com [broadvoice] type=peer fromuser=[number] host=proxy.lax.broadvoice.com fromdomain=sip.broadvoice.com context=from-broadvoice dtmfmode=inband any help would be

Hello All, I have 4 Broadvoice lines. If I call any of the lines it shows that is coming from the first line. exaple register=XXXXXXXXX1@sip.broadvoice.com:passwd:XXXXXXXXX1@sip.broadvoice.com register=XXXXXXXXX2@sip.broadvoice.com:passwd:XXXXXXXXX2@sip.broadvoice.com register=XXXXXXXXX3@sip.broadvoice.com:passwd:XXXXXXXXX3@sip.broadvoice.com