similar to: PRI Card TE110p Question

Good Day list, Anyone know if there is a way to have the AgentCallBackLogin function play a voice file after the agent picks up the phone? If this is not an available feature, any ideas on the difficulty in making this feature? Example: Extensions.conf exten?=>?700,1,AgentCallbackLogin(${CALLERIDNUM}|?AnnounceCAllQue-TechSu pport?); ....... exten => s,6,Queue(queue1)

I have been getting quite a bit of PRI Resets using my Quad PRI Digium card. Prior to the resets I am getting similar notices to the following chan_zap.c:7482 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 3 Telco claims the PRI's are fine on their end and that it is my unit. Is this timing? (google somewhat leads to this) I am running 1.08 asterisk zaptel

Good Day again list, Encountered another problem in the ACD queue... If I use the ADDQueueMember to dynamically add members as foolows, exten => 403,1,AddQueueMember(techsupport|SIP/${CALLERIDNUM}) lets assume I called extension 403 from my extension 2204. then a caller (extension 2203) enters into the techsupport queue I am able to receive the support call on my phone (extension 2204

Hi Is it possible to swap the yum.conf from my centos box onto my whitebox box and have the whitebox machine use centos updates through yum? CentOS seems further ahead and far quicker at roll outs than whitebox? thanks

Hello several months ago I install WhiteBox Linux on several severs, I was happy, not woriing about upgrading every 1,5 year as when I use RH 4.0, 6.0, 7.3, 9.0 .... And then WhiteBox went black, WBEL updates release slowed down and maintainer wont help form anybody. Just telling "If you want quick updates, build it yourself.". I prefer wasting time for customizations and/or

Hi to the list, I am trying to find a way to painlessly move structured data back and forth between R and Matlab (also Octave). For this purpose I found the R.matlab package great help. I wish to use a Matlab -v6 MAT file as an intermediary format, because it is well read by both Matlab and Octave. It is also well read by 'readMat' function in R.matlab package, but that is where I run

I've been following the faq for moving from whitebox to centos (which admittedly is for release 3, but using the equivalent release 4 files) and keep getting stuck when installing the centos-release-4-2.1 rpm which says it should replace whitebox-release4.2 However this is not happening, giving me the following rpm -Uvh

Hello all I migrated my Centos installation from a whitebox install few months ago. Only one minor issue...on booting up X, the login screen shows whitebox logos. At that time, I did not tackle it because I assumed that it will automatically be upgraded with yum...and again it was not essential to running the OS. What whitebox rpms do I need to substitute with centos ones to correct this

Good Day list, My head is pounding from google overload. Does anyone know if there is any way to park a call and specify the ("context", "Extension", and Priority) of where to call back to if the call times out and is parked too long? ParkAndAnnounce does this feature, however I do not like that it has to call you back to announce the location. I want my cake and eat it

Good day, I am hoping that someone can assist me with a work around. I have an IVR system that I am attempting to connect asterisk to, however the IVR was written Some time ago, and requires tones to be approximately 2 seconds in length. I am using SIP Phones, Is there any way to adjust the Length of the Tones that asterisk sends out the audio path? Are there any phones that would allow

So I have read and read and read... google is my friend and the wiki is by brother... However, I am still unclear on what the preferred method of using the pound sign is. If the Pound sign is set aside for Transfer.. Then when I make an outbound call to my bank I can not "Enter my PIN followed by Pound" Likewise if I turn off the ability to transfer when initiating a call, my bank pin

Bear with me, this is CentOS related. :) I have a python CGI that's behaving weirldy on Whitebox systems that've been switched over to CentOS 4 (ages ago, no other problems to speak of aside from this one). I've broken the problem down to a minimal test case... 1. Create a small database # sqlite3 /tmp/testcase.db 'CREATE TABLE testtable ( date date primary key unique, name

Hi list, I have a terrible noise issue with Dell SC1430 + Digium TE110P. The digium card is not sharing interrupts with any other device, as I saw in Dell's BIOS and also with "lspci -vb" command. After changing coax wire, UTP, balum, digium card ... I have found that the problem is in Dell box, so now I'm running the same Asterisk config in other server with the same

For those interested, I'm giving a talk about VoIP/enum.164/asterisk tonight in Sydney at the Sydney LUG meeting which is about 7pm in the UTS build #2, 4th floor, room 10. Sorry for the late notice, it didn't occur to me that there might be people on this list interested and able to attend etc... -- Best regards, Duane http://www.cacert.org - Free Security Certificates

Good day list, I am feeling extra stupid this Monday morning and am hoping someone can come to the rescue. I am trying to use the ztmonitor utility on my wildfire 4 FXO card. and have read the following from the wiki. *********Wiki start******** If you set this to yes, use ztmonitor to adjust the rxgain and txgain. Ztmonitor isn't installed by default; but it is included with the Zaptel

Recent convert from WhiteBox, a few questions What is the difference between CentOS 4.2 and "4"? Is this like the Whitebox "respin"? Are updates/packages for 4.2 applicable across all the "4" series of releases? -Ben -- "The best way to predict the future is to invent it." - XEROX PARC slogan, circa 1978

Hi all... I have a scsi Tape library. Centos only sees the tape drive portion of the library. I need to enable Multiple LUN support to get the library and tape drive recognized. I am looking for some help enabling multiple lun support in Centos 4. I had a procedure on how to do this in the 2.4 kernel but it doesn't seem to work in the 2.6. Any help would be appreciated. Config:

We are in the process of installing a PRI line and we are going to connect it to an Asterisk Box. Verizon called us today to find out some information. I am surprised that they have never heard of Asterisk or Digium. But anyways, they needed some information in order to set up the circuit. Does the TE110P support NI1 or NI2? (I think the answer is both) What is the number of digits

Hi all Can you tell me what is the different between fedora / redhat enterprise / centos and whitebox? Thank you ____________________________________________________________________________________ 8:00? 8:25? 8:40? Find a flick in no time with the Yahoo! Search movie showtime shortcut. http://tools.search.yahoo.com/shortcuts/#news

Hi all, I'm sure something similar has been discussed, but one can only wade through the archives for so long. I'm setting up a T1 and my telco has a bunch of questions it wants me to answer. I know much of the TE110p is configurable to do any of this, but I wanted to know if there is an optimal or preferred setup. Any help would be appreciated. Here is the quiz my telco is giving me: