similar to: Zaptel problems, Asterisk 1.0.6

Dear list, I am trying to learn how to use Zap-things in Asterisk. While loading Asterisk verbosely I get this error: [chan_zap.so]Warning, flexibel rate not heavily tested! => (Zapata Telephony w/PRI) == Parsing '/etc/asterisk/zapata.conf': Found Mar 12 17:19:01 WARNING[5563]: chan_zap.c:763 zt_open: Unable to open '/ dev/zap/channel': No such file or directory Mar 12

Of course I am not a kernel expert, so .. please be patient. I am investigating on my zaptel/zapata problem. As the main error message asterisk quits on mentions <'/dev/zap/channel': No such file or directory> I went peeking over there. [Asterisk Verbose Error Mar 13 20:43:35 WARNING[5779]: chan_zap.c:763 zt_open: Unable to open '/ dev/zap/channel': No such file or

I know that this subject has been treated in the past! As a matter of fact reading some old messages about compiling zaptel I made a couple of tests after the first compiling failure to understand why I can't compile on a specific machine, but I do not know how to handle the results. The machine has SUSE 9.3, and an updated kernel (2.6.11.4-21.7-default; as shown below). YAST (the graphical

Hello list. I have a question about how to read the incoming calls' callerid on an FXO interface of a TDM 400 analog card; (it's one of those RED modules). Now -may this is the complexity adding step..- I have a GSM gateway attached to this FXO thing; incoming calls are processed as they should. But both when peeking on the CLI, as well as in the phone display I do not see the caller id.

Dear list, I am back with my problem compiling zaptel 1.0.9 . I am running SUSE 9.3, with kernel linux-2.6.11.4-21.7 I have the kernel sources on disk. YAST tells me they match the compiled kernel. > # ls -l /usr/src >total 1 >drwxr-xr-x 7 root root 280 2005-07-16 13:24 . >drwxr-xr-x 12 root root 344 2005-07-16 11:27 .. >drwxr-xr-x 25 root root 736 2005-07-16 12:12

I have a CentOS 4.6 server running dhcpd. One of my client devices (a Panasonic KX-HCM280A camera) is trying to get a lease from that server. I can see the device accept a lease (it is a reservation), however it always releases the reservation after about 25 seconds: Jul 10 10:30:49 stargate dhcpd: DHCPDISCOVER from 00:80:f0:56:46:30 via eth0 Jul 10 10:30:49 stargate dhcpd: DHCPOFFER on

https://bugzilla.samba.org/show_bug.cgi?id=4183 Summary: rsync not recursive when using -a in combination with -- files-from Product: rsync Version: 2.6.8 Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P3 Component: core AssignedTo: wayned@samba.org

Hi all, I have noticed something I can't solve regarding Asterisk (latest 1.6.0.x). My server is set at the GMT+2 timezone. The clock is ok (I can get the correct time at the terminal). But today I got a call at a time where Asterisk should have gone 'off business hours'. All log times are wrong by exactly 2 hours. As if Asterisk would just sit on GMT, ignoring the GMT+2

You probably know this already, but the following notice appeared to bugtraq. As a side note the protocol on bugtraq seems to be designed to make a fix available before the announcement by providing one yourself or giving the maintainer a week's advance warning (M$ gets a lot longer warning and *still* fails to fix the bugs before bugtraq knows). Having said that M$ insists on allowing me

Hi - I am trying to find a Linux based solution for one of my clients, I want to bond two adsl lines into one, with redundancy (if one fails the other does all the work). I''ve been looking into ECMP (Equal Cost Multipath), I know BGP would work, but something like ECMP would be much simpler. I have full control of both ends of the connections and I can have both ADSL lines terminate in

Hi list! On a newly installed RHEL 4 box I'm trying to install bristuff-0.2.0-RC8n. Everything did compile but I am running into some problems with the zaphfc driver. First of all when I load zaphfc *before* zaptel (yes I know I shouldn't do that) I get a kernel panic and the box hangs. Not so nice, especially when you are trying to fix stuff from remote locations. But ok. Now for

Dear all, I have tried to compile * 1.0.6 (downloaded from the digium site, in the right sequence - zaptel, libpri, asterisk) on two different machines running SUSE 9.2. The problem comes during some preliminary checks: checking for ar... /usr/bin/ar checking for tgetent in -ltermcap... no checking for tgetent in -ltinfo... no checking for tgetent in -lcurses... no checking for tgetent in

Hello, i must admit that i'm totally lost. After working a lot of hours my new samba server is still not running fine. I had read a lot of papers but i have no idea what's going wrong. My goal: --------- Samba 3.0.9 (Fedora Core 2) working as a PDC for windows 2000 professional client (with sp4 and all hotfixes applied) _with_ roaming user profiles. My status: ---------- *

Is there any additional documentation/information around the new stats module. Have added some metrics just to see what they produce ## ## Metrics ### metric imap { ??? event_name = imap_command_finished ??? #source_location = example.c:123 ??? #categories = ??? fields = name args running_usecs bytes_in bytes_out ??? #filter { ??? #??? field_key = wildcard ??? #} } metric sql { ???

Greetings I was getting bad static crackle on a phone, so I reload from the latest CVS and did a make clean ; make install on zaptel, libpri and asterisk Now I get this error [chan_skinny.so] => (Skinny Client Control Protocol (Skinny)) May 28 13:59:42 WARNING[16384]: chan_skinny.c:2541 reload_config: Unable to get our IP address, Skinny disabled Urgent handler [chan_oss.so] => (OSS

Good afternoon, I am triying to send an sms through a gateway gsm (stargate) that is connected to a ZAP/g1 card on my asterisk. But I get this message : -- Attempting call on ZAP/g1 for application SMS(0) (Retry 9) -- Requested transfer capability: 0x00 - SPEECH -- Channel 0/1, span 1 got hangup -- Channel 0/1, span 1 received AOC-E charging 0 units > Channel Zap/1-1 was

Hi List, I have a test asterisk box with a TDM400P with 4 FXO modules plugged in. Yesterday I could use the box without any issues - no problems. This morning, the sound on the box was absolutely horrible. After some fiddling about, I have rebooted the box, and now asterisk refuses to start! Here's the message I get: Jun 9 10:45:53 WARNING[3297]: chan_zap.c:769 zt_open: Unable to

Hi, I've a little problem with my asterisk server. I have managed an asterisk server for a few months one. Today, I wanted to restart it and when I did it, my asterisk server didn't want to start again. I looked at the various messages in /var/log and the same thing appears. " [chan_zap.so] => (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf': Found Sep 30

Some of the behaviours you observe may be due to the same bug I encountered: https://dovecot.org/pipermail/dovecot/2019-July/116475.html Especially, regarding the ?successful' field for auth, which does not exists and is really named ?success', and which is never set anyway. > Le 15 ao?t 2019 ? 23:57, Matt Bryant via dovecot <dovecot at dovecot.org> a ?crit : > > Is

Trying to config the latest Asterisk/zaptel with an Digium Wildcard and a single X100m FXO interface connected to a POTS analog line. Build and install of both work ok - I'm using Suse 8 on a dual Pentium box. I load the driver with "modprobe wctdm" and the LED on the wildcard lights up. Then I start Asterisk with "asterisk -vvvgc" and asterisk fails to start. The