similar to: Asterisk@home silly problem, please help!

Same problem here: if call come over ISDN PRI and it is for a SIP phone that equals to strong echo situation, at the SIP end. Interestingly this doesn't happen on all calls but it does on 95% of them. Asterisk load at that moment is insignificant - 1 to 2 calls. I have tried with all possible echo cancellers in zconfig.h, with and without MMX, and with and without CFLAGS+=-march=i686 in

Hello, I have problem with capi, I can't install it. I have putted all info what I did and what I get :). I think you can suggest me how to solve this problem.and thanking you in anticipation. I have ISDN Frtiz!Card PCI v2.1and I want to install it to my ubuntu box (kernel: 2.6.17-10-server). Using command "lspci -vv" , I can see that kernel finds this card: *02:0d.0 Network

Hi ! I've fetched a spare AVM B1 card from the cellar, and installed it. After "modprobe b1pci" I did "capiinit" and capiinit moaned about a missing t1.b4. So I search the web and found one at http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the controller, I finally see p2p-mode: # cat /proc/capi/controllers/1 name b1pciv4-a400 io

Hello all, I'm trying to setup a AVM C2 card. I have read the kernel requirements for this card. <M> CAPI2.0 support [*] Verbose reason code reporting (Kernel size +=7K) [*] CAPI2.0 Middleware support (EXPERIMENTAL) <M> CAPI2.0 /dev/capi support [*] CAPI2.0 filesystem support <M> CAPI2.0 capidrv interface support My problem is when I make a "make

Hello, I will use CentOS 4.4 and Hylafax to build an fax server. But when call /sbin/capiinit I only get the error: ERROR: cannot load module kernelcapi I have build and install the kernel module for my friz card. What must I do to get this working? Frank -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 5766

HI all, Has anyone succesfully installed an AVM Fritz! card on Fedora 7 using the drivers at ATrpms recently? http://atrpms.net/dist/f7/fcpci/ I tried with a clean F7 build on my EPIA 5000 yesterday, after modifying /etc/capi.conf (removing the coment # in front of fcpci line) I received the following error when executing 'capiinit' - FATAL: Error inserting fcpci

Hello List! I have this "simple" problem: fileserver:/usr/src# capiinit start modprobe: Can't locate module kernelcapi ERROR: cannot load module kernelcapi Although, i think i hav everything build in, and loaded: ~# grep -i capi linux-2.4.27/.config CONFIG_ISDN_CAPI=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=y CONFIG_ISDN_CAPI_CAPIFS_BOOL=y

Hello everyone, I have been using an AVM Fritz! card with chan_capi and mISDN for quite a while in PTM mode and it was working finely. Now, I needed more DID/MSN, so I switched to PTP. But now nothing works anymore :( I am using Asterisk on Debian Sarge stable and installed Asterisk along with chan_capi from apt-get. I installed mISDN from the CVS of isdn4linux.de. It is : - Asterisk

Does the SugarCRM included with AAH 1.3 not meet this criteria for you? ------------------------------ Message: 3 Date: Tue, 26 Jul 2005 17:48:08 +0100 From: "JunkMail" <junkmail@segurajuda.dyndns.org> Subject: [Asterisk-Users] Dial using URI(web) or using FORM(web) To: <asterisk-users@lists.digium.com> Message-ID: <009101c59201$cd5cc9c0$0a00a8c0@segurajuda.local>

Can anyone suggest where I might begin looking for an answer please? I have just installed a TDM400P (2x FXS and 1x FXO modules installed) The first problem is that it does not seem to be able to detect if the remote party has hung up when a call comes through on the FXO. For example, if someone calls in, and then hangs up at any time after it starts ringing, Asterisk carries on as though the

Can any one tell me how to install CAPI for Fritz cards on a Mandrake 9.2 system. I have been working through http://www.voip-info.org/tiki-index.php?page=Asterisk%20How%20to%20conne ct%20with%20CAPI and just cant seem to get it working. -------------- next part -------------- An HTML attachment was scrubbed... URL:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, i'm in debian sid 3.1 with kernel 2.6.7, * last cvs & chan_capi 0.3.4b; nt1+ with 2 bri in ptmp (http://www.voip-info.org/tiki-index.php?page=DDI) i tried to install avm c4 following step by step http://www.voip-info.org/tiki-index.php?page=Asterisk%20How%20to%20connect%20with%20CAPI step 1. i compiled capi 2.0 support in kernel

Hi * Fans, I have some fritz cards now, followed instructions from stuart hirsts email of Jun 28: -> Thanks for your info but I think I have it working at last. Below are the steps I took which might help others. 1) Download the PCI AVM drivers from ftp://ftp.avm.de/cardware 2) Download the Chan_capi from http://www.junghanns.net/asterisk/ 3) tar -xvzf fcpci-suse8.0-03.09.10.tar.gz which

Hi, I have a Fedora 7 xen system with a domU to which I have delegated via pciback two isdn pci cards. One is a HFC-S card, the other a AVM Fritz!Card Pci 2.0. In the domU I load mISDN drivers for the cards. The two cards are recognized and function well UNTIL I either decide to unload one or both of the card driver modules (hfcpci and avmfritz) or I decide to shut down the domU. At this

Hi, First, here is my config: Kernel version 2.4.25 on a Fedora distro, Asterisk and a Fritz! Isdn PCI Card (v2). I try to make the CAPI drivers deal with Asterisk but I can't try to figure out to get of this issue. As I see, Fritz modules are integrated with the kernel, so I directly loaded the 'hisax_fcpcipnp' module from it. I install also Capi modules by downloading archives of the

Hello ! I would like to get working a Fritz PCI card using chan_misdn operating in ptp mode. Afer compiling mISDN into the kernel and building chan_misdn Asterisk stops loading with : [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found UnLocking config_mutex == Registered channel type 'mISDN' (This driver enables

This probably has an easy solution, but I found it yet. How can I get out of a remote console after using ssh to get into the box, making changes, reload etc. without stopping *? Thanks in advance. Sincerely, Andy Hester Consero

I''m in an Oracle shop, and it''s the 1 thing that gets on my bosses nerves. I wish they would support this. Anyone any idea if or when it will be supported? Thanks Chris -- Posted via http://www.ruby-forum.com/.

Hello to all, I have a strange behavior of my asterisk box. I'm running asterisk with asterisk-oh323 channel driver and everything works very well. But after few hours, my asterisk stop running and I have to restart it by typing "asterisk -vvvc". Most of the time I connect to my asterisk with a remote host so I don't know exactly which error causes my box to stop, but I found on

Hello again, I have a little problem, every time I switch on the Asterisk server I must load two modules: modprobe zaptel and modprobe wctdm Is there any way to load there automatically when the server start? I have a Debian Etch. One more cuestion, it's posible to start Asterisk (asterisk -vvvc)as well? What metod do you prefer? "asterisk" or "asterisk -vvvc"? Thanks