similar to: Providing a dialtone

Is anyone having/had a problem with a TDM400P card hanging up on STD outbound calls as soon as the called party answers. I'm guessing that * is responding to the STD pips in some way. -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just want a system that works, you choose Linux; when you

Is it possible to run the Festival command in the same manner as the Background command so that it can be interrupted by caller key presses? -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just want a system that works, you choose Linux; when you want a system that just works, you choose

Can anyone _recommend_ a downloadable OSS softphone that _works_ under Linux and is compatible with Asterisk. So far I have tried kphone and linphone and had problems with both, and I am still waiting to hear back from the X-Lite beta folks. -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just

I'm not sure if I have a configuration problem or not. I am unable to dial out. When I try to dial in I can hear the phone ring on the dialling phone but Asterisk does not register anything. In zaptel.conf I have loadzone = au defaultzone=au fxsks=1 In zapata.conf language=au context=from-pstn When I do: zap show channels I get: Chan Extension Context Language

I think I have something misconfigured regarding voicemails. They work great, I have this setup: Sip.conf [ext1] Context=phones Mailbox=201 Voicemail.conf [home] 201,password,name,email@mail Voicemail delivery and all works great but when I check sip extension ext1 (analog phone using a Granstream ATA 286), the stutter tone signaling message waiting does not work. Anything wrong with

Hi, all I am building a new server. Have installed FC 6 and put in TDM400 card. Checked out latest asteriusk code, run make install in zaptel directory. So far all is fine. Now I am trying to install the drivers. # modprobe zaptel FATAL: Module zaptel not found. Fair enough, no zaptel driver is found on the system. Is there are any known problems with FC6? I did not have much trouble running

Hi, I need to setup a demo for asterisk and need some help here please. The demo is connecting to Asterisk a Cisco 7970 SIP (ver. &.0) and a SIP client on HP iPAQ via a wireless hotspot. I need to configure both with the same extension with a shared line like in Cisco CallManager. This way if the extension is called both iPAQ and the IP phone ring and the user gets to pick up using either.

Folks, I'd like to change the value of ${CALLERIDNAME} for incoming PSTN calls from certain numbers, but haven't found a way that works. The goal is to provide more informative names on my phones' caller ID displays--e.g., I would prefer to display "ROB CELL" instead of "CELLULAR CALL" when I call home from my cell phone. This is what I tried in the context

I'm trying to get the X100P card working in AU. So far I have managed to get it to handle incoming calls from the PSTN and have managed to eliminate pretty much most of the echo. My big problem is getting the outbound calls to work. When I get ZAP to dial out it won't connect and I get what I think is the Congestion signal - like a busy signal but with what appears to be a 10db

Hi there, what phones are available that have two ethernet ports? I want to do some cabling at a new installation and i heard there are such phones (SIP i guess) out there. That way i dont have to run two cat5 to the user desktop. I think 3COM had one but can't find the web site reference for the two port phone thanks, erick

I'm still learning some of the basics. Can someone explain in layman's terms what's the difficulty for Asterisk to support SIP/TCP (and even RTP/TCP)?

Hello All, Yep I'm a newbe. I'm just started to play with asterisk. What I have Redhat Fedora Core 2 (New install) 3 X100P cards. I installed zaptel-1.0.3 libpri-1.0.3 asterisk-1.0.3 Where should I start?? -- Thanks, David -- This message has been scanned for viruses and dangerous content by KE6UPI, and is believed to be clean. KE6UPI thanks MailScanner for their support. Please

iaxComm is a crossplatform open source softphone utilizing the IAX2 protocol. It is distributed as part of Steve Kann's iaxclient library. I've just posted new Windows, Linux and Mac OSX binaries to sourceforge. The Windows binary was compiled on WinXP. The Linux binary was compiled on RedHat 9. The OSX binary was compiled by Andreas Wrede on 10.3 and was tested on 10.4 (Tiger) beta.

I am trying to use the Directory() but am having difficulty using it. According to Wiki page that I found you need to pass it your voicemail.conf context. My vm-context is [local]. So when I setup the cmd (Directory(local)) I can search on the three letters of the last name find that user. But once I press one to except the name and dial the extension I get the following message form the *

I've got an old Dell Optiplex (Pentium-II, 1998 Vintage) which is successfully running an X100P card. I'm hoping to upgrade to a TDM400. Has anybody tried running these cards in old Optiplex machines? I'm not particularly worried about horsepower - more about the motherboard having a PCI bus that's able to power up the card... -Ronan

OK - I can successfully make calls from SIp phone through an asterisk 323 channel to a Cisco Call Manager and out a MGCP controlled gateway. The problem is that if the call is not answered within ~5 seconds, * gives the message "no one is available to take your call" and disconnects the call. If I answer b4 the 5 seconds - everything is good. Anywhere I need to set to get around

I would like connect two offices where one office have 4 PSTN Analog lines and another office without any PSTN. Both the offices will have two separate Asterisk server with TDM400P cards (4 ports FXS & FXO). My questions is that how to configure Asterisk to forward the PSTN calls directly to another Asterisk which has the TDM400P card without pressing the extension number. Diagram like

Has anyone implemented "hot seating" in any neat way? This where people can log in to any phone in the company and have their calls/voicemail come to that particular handset.....

I've been trying all day to reach their techie folks to ask a couple questions about something I worked all weekend on. Keeps rolling to VM and the receptionist does the same thing. Just was wondering if anyone else was able to reach them today. Brian Greul Texas Shirt Company www.txshirts.com 713-802-0369 / 713-861-6261 (fax)

Hello All, I have a macro and want to jump to another macro if a conditition is true or false. Asterisk is jumping to the next macro, but then the {ARG1} variable is not working anymore. part of config: [macro-default] exten => s,1,DBGet(do-not-disturb=DND/${ARG1}) exten => s,2,GotoIf($["${do-not-disturb}" = "YES"]?macro-do_not_disturb,s,1) ... [macro-do_not_disturb]