similar to: Broadvoice latest changes and still not working-An Additional Server

I have been going crazy with this also since Sat. Our server was working perfectly with BV but will now not place calls to BV. Incoming from BV works fine. I felt sad rebooting it today, it had been running for almost 200 days! Here is my error message from the console... Notice I am running today's CVS Connected to Asterisk CVS-03/08/05-14:32:39 currently running on com (pid = 1624)

Van, It's a new version and there is no inventory in stores yet I know you'll be pleased once it finally arrives. Best, William -----Original Message----- From: Zanzamar Majere <Phoneman@wbtllc.com> Date: Thu, 10 Mar 2005 11:05:07 To:Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> Subject: Re: ***SOLVED*** [Asterisk-Users]

I've tried everything with the * box after this weekend. I have read every document on the problems people are having with them after this weekend as well, but none of them address my problem. I checked my settings in my sips which I have below as well, I have changed the host file a few times, but this was new to me and I never had modified it before. I have and the same results

I did a quick google search of the lists site and couldn't find a definitive answer, so if it's there, I apologize for asking again. Starting about noon yesterday, I am no longer able to send/receive calls via Broadvoice. When calling in, I get a fast busy, and when calling out I get the following error: -- Executing Dial("SIP/112-572a",

I have added the three lines to the sip.conf file based on the latest changes from broadvoice. I can receive incoming calls but cannot place any outgoing calls. The error I get is: *CLI> -- Registered to '69.73.19.178', who sees us as IPADDRESS:4569 -- Attempting call on SIP/Broadvoice/5068012 for application Playback(demo-congrats) (Retry 1) Mar 8 08:35:21 NOTICE[29290]:

I have tried everything to get BV working outbound. All worked fine until the BV change last week. I called BV and they changed me to sip gen with a new password. I stripped my Asterisk server to one phone on Zap/1 until I get this working. The same BV account works fine with a SPA-3000 so I don't suspect a firewall problem. Symptoms: Asterisk registers with BV Ok Incoming calls work

Hello All, I'm just getting into *, and trying to use a Broadvoice account. It works inbound, but Outbound fails no matter what sip.conf parameters I try. From the recent posts here I think it could be: A bad CVS release - I will try to download and build from a new one Broadvoice not challenging and/or Asterisk not responding with an Authorization: in the INVITE header. I am

This configuration solved my problem. I could have sworn I tried this before. I guess not. I did not need to apply the patch. Also, I am using a regular Registration setup in my sip.conf not broadvoice's funky one... The only thing I can surmise is that order of the variables matters. This is what worked for me: [PPPPPPPPPP] type=peer user=phone host=sip.broadvoice.com

I finally got my incoming and outgoing to work on Broadvoice with a configuration file that is no where close to the one given by them. Here it Is (sip.conf). For others who have a working config could u please share so that I could compare. Thank You [broadvoice] type=friend username=[number] fromuser=[number] secret=[password] host=sip.broadvoice.com fromdomain=sip.broadvoice.com

HELP! Ok, so I have the following SIP.CONF: [general] context=default port=5060 bindaddr=10.1.1.200 externip = XX.XXX.XX.XX localnet=10.0.0.0/255.0.0.0 disallow=all allow=ulaw allow=g729 allow=g726 allow=alaw register => ##########@sip.broadvoice.com:XXXXXXXXX:##########@sip.broadvoice.com/1234 [sip.broadvoice.com] type=peer host=sip.broadvoice.com fromdomain=sip.broadvoice.com

--------------- Hi, I got hit with a funny one today; my configuration, which had been running fine for many weeks, suddenly stopped registering with Broadvoice's SIP. I switched among BV SIP hosts, verified my account was OK, even tried upgrading Asterisk. The weird thing was that I could associate OK with my WiFi SIP phone. So it looked like an Asterisk- specific SIP interoperability

Hi, all. The asterisk setup is working fine, receiving calls via broadvoice "initially". ? When call comes in via broadvoice number, asterisk picks it up and routes correctly, as long as the call came in within ~2 min from the previous one. In other words, as long as a call comes in within ~2 min since the previous one, asterisk will answer the call. However, if the call comes in

I can call my Broadvoice DID from a outbound caller-id blocked phone, and BV happily delivers the CID to Asterisk (and then on to my IP phone display.) I've tested with the *67 prefix from a PSTN phone to make sure it was supposed to be blocked. The number is always correct, but sometimes the the caller ID name is set to something funky (like a CO or switch center name.) I *think* this

Is anyone else experiencing 404 errors on outbound dial with Broadvoice? I've followed the instructions posted by Broadvoice to configure sip.conf, and inbound calling works fine. Every time I try to dial out, I get a 404 "Not Found" error. Here are the relevant sections from my configs. sip.conf: context=broadvoice-in register =>

I configured this once now I forgot what I did. Two Broadvoice accounts. Incoming is simple - just use the phone numbers. Outgoing: Dial out on a specific line and/or set up the groups and select the other "line" if the first one is busy? -- James Taylor MetroTel 3505 Summerihll Road Suite 11 Texarkana, Texas 75503 903-793-1956

So it was all working well and then suddenly I'm unable to get incoming calls from BV. Outgoing is fine. I'm using AAH. I have the following settings; register=9738281625@sip.broadvoice.com:PASSWORD-GOES-HERE:9738281625@sip.broadvoice.com/2208 [broadvoice] username=9738281625 user=phone type=peer secret=PASSWORD-GOES-HERE qualify=1000 port=5060 nat=yes insecure=very

I have configured asterisk with the AMP php configuration utility. I am able to make outgoing calls through broadvoice but incoming calls are sent to BV's Voicemail and never actually enter the IVR. When I show sip debug info through the asterisk prompt it actually reads the incoming call from BV but then issues a busy signal sending the call to BV's voicemail. I also modified

Suddenly my broadvoice will no longer register. It was working fine for over 1 month without a single problem, now I get a SIP registration timed out message. I called them, and I was told that they are experiencing problems, and they hoped to have it resolved ASAP. I called them at around 10 AM EST this morning. It's now 8:30 EST PM, and I still have not heard back, and the problem is not

Let me start by stating that I've been thinking about setting up an unofficial broadvoice-users mailing list for a while. I've asked Broadvoice techs about it a couple times by phone and email and it looks like they haven't passed it up to the people who would make that decision or said people aren't interested in creating/maintaining one. If there's enough interest (read 10

Hello All, I have 4 Broadvoice lines. If I call any of the lines it shows that is coming from the first line. exaple register=XXXXXXXXX1@sip.broadvoice.com:passwd:XXXXXXXXX1@sip.broadvoice.com register=XXXXXXXXX2@sip.broadvoice.com:passwd:XXXXXXXXX2@sip.broadvoice.com register=XXXXXXXXX3@sip.broadvoice.com:passwd:XXXXXXXXX3@sip.broadvoice.com