similar to: Asterisk with mediant 2000 - facing problems

Thanks James, What i need is to make the fax machines connected to the audiocodes mediant 1000 be able to send and receive fax throught Asterisk (connected to a pri) I know it's not reliable, but it should work at leaste, what should i do on Asterisk and Mediant to make this work? Im quite confuse with all these fax issues :S Thanks in advance > > Message: 11 > Date: Fri, 9 Apr

Hello my friends, I want to make fax work in the following scenario: My versions are: Asterisk 1.4.21.2 WANPIPE Release: 3.4.7 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P The E1 pri is connected to our Sangoma A102DE, we also have a SIP Mediant Audiocodes 1000 where we have some fax machines connected to fxs ports, what we need is to make fax machines through mediant

Hi, This is my first experience with a mediant 1000 and an Asterisk Trixbox. the mediant has 12 FXOs and 12 FXSs, and I want to use it them all. I will have extensions connected to the FXS ports, and lines to the FXO. Can anyone guide me, please? regards, -- Guillermo Garron "Linux IS user friendly... It's just selective about who its friends are." (Using Ubuntu, Debian,

Dear All I want to integrate asterisk with mediant so anybody have configuration for this setup [asterisk]----------[mediant]------[avaya] this is my setup so what is the basic configuration for this setup --------------------------------- Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase. -------------- next part -------------- An

Dear All I am new in this list right now i am working on asterisk server and deploying asterisk PBX in my organization now i have alread setup Avaya PBX and i want to intergrate my asterisk through mediant 2000 [asterisk]-----[mediant 2k]--------E1-trunk------[Avaya] this is my setup now i want to create dialpan so how to forward call in to existing avaya setup means i have not

Dear all anyone have idea about connect asterisk with mediant 2000 audiocode configuration ... anybody have configuration about it --------------------------------- Get your own web address. Have a HUGE year through Yahoo! Small Business. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi FOlks, I am trying to setup remotely an "AudioCodes Mediant 2000" MG Module 2 to work with Asterisk through SIP or H323. But since I don't the product manual, it's being a little hard. Anybody would the manual in PDF(file or URL) to indicate to me? Thanks a lot, Isamar

Hi, I am configuring an audiocodes Medant1000 to talk to my asterisk box. So far I have successfull in landing a single call from mediant to my *box. my sip conf is as follows: [general] context=sip bindport=5060 bindaddr=0.0.0.0 srvlookup=yes [3911700] type=friend host=dynamic dtmfmode=info secret=blah context=sip where 3911700 is my E1 telephone no. in my extensions.conf I have exten =>

Does anyone have any information for me? Welinghton. Citando Welinghton Magno Guimaraes <welinghton.guimaraes at ufvjm.edu.br>: > Hello! > ? > I am setting up an Asterisk server with a Mediant 1000 (Audiocodes) > to make external links. Does anyone have any manual or instructions on > how to proceed? > ? > Asterisk ?=>? Mediant 1000 (AudioCodes) ?=>?

I sent this yesterday, but saw zero traffic, so I think it got lost in the ether, so I'm sending again. I'm having an issue using Asterisk 1.2.14 and an Audiocodes Mediant 1000 ISDN gateway. For the most part, everything is working except for attended transfers. When I do an attended transfer, and complete the transfer before the 3rd party answers, the PSTN side hears dead air until the

I just put in a Audiocodes Mediant 1000, which seems to be working well except for one annoyance. I am using Polycom 501's and 601',s and if I do a supervised transfer of a PSTN call where I complete the transfer before the 3rd party has answered, the PSTN party hears dead air until the call is answered or goes to voicemail. I'm not really sure where to start my troubleshooting. Any

Greetings... I'm working on getting an AudioCodes Mediant 2000 big box o' PRI's going with Asterisk, and am running into a problem with DTMF handling. The box is sending DTMF packets to Asterisk as INFO packets, and they are apparently being seen by Asterisk. However, the DTMF knowledge doesn't seem to actually do anything -- the VM system doesn't recognize the digits,

We're experiencing an issue where calls disconnect after 15 minutes. It seems to happen just after Asterisk sends an update mesage. RTP is being set up directly. Asterisk is only in the SIP dialog. Has anyone experienced this issue? 4 PRIs inbound, 4 PRIs outbound, asterisk provides switching. SIP/2.0 200 OK Via: SIP/2.0/UDP 38.XXX.XXX.XXX:5060;branch=z9hG4bK1c4b524f From:

XD... gajes del oficio. Te lo había dicho Carlos en el mensaje anterior... Un saludo Isidro Hidalgo Arellano Observatorio Regional de Empleo D.G. de Desarrollo de Estrategia Económica y Asuntos Europeos Avenida de Irlanda, 14 Tlf.: 925 28 80 98 ihidalgo en jccm.es Consejería de Empleo y Economía http://www.jccm.es > -----Mensaje original----- > De: Jorge Tornero - Listas

Cuando haces... colIniAnalisis <- ncol(p.grupos)+ncol(p.pesos.ord)+2 ...sumas 2 al número de columnas de los dataframes pierdes el tipo "integer" y conviertes "colIniAnalisis" a coma flotante. Cuando construyes el rango ya no tienes enteros y no funciona. En teoría debería, pero no lo hace. Quizá alguien te pueda explicar por qué no funciona... Prueba con

Dear all I have setup of asterisk 1.2.14 and this is working fine. first i want to explain you my setup of asterisk on network i have connect my asterisk with mediant 2000 gateway and PRI terminated on mediant. [fax_machin]------[audio_code_fxs]-----[Asterisk]-------[mediant_2000]---PRI--<--< my fax machine connected with audiocode 24 fxs extention and which is

Chico, me quedo a cuadros. Algún fiera de por aquí te dirá por qué, pero yo a bote pronto no tengo ni idea... Si nos puedes poner el código con el que se originan ese par de variables quizá podamos ver algo... Un saludo Isidro Hidalgo Arellano Observatorio Regional de Empleo D.G. de Desarrollo de Estrategia Económica y Asuntos Europeos Avenida de Irlanda, 14 Tlf.: 925 28 80 98

Abhishek, In reverse order 3/ yes it is freeware, though some of the termination boards are available for sale from www.digium.com 2/ yes you can interface to Cisco handsets running SIP. 1/ Does it have a gui interface - the short answer is no. The longer answer is depending on what you mean, if you mean programming - then no though a number of people have developed sql interfaces. If you

Dear all I have asterisk setup now what happend when i dial 4 digit number my asterisk wait for few digit why when i press # key it is dialing fast but without # wait for few number is there any configuration for dialplan I have setup asterisk with avaya system i have 5 avaya system on 5 location i use 16XX,22XX,33XX,44XX,20XX to reach avaya extentions but when

Dear ALL I have audiocode MP -124 with configure in asterisk Endpoint configuration means every analog phone register in asterisk now thing is that i have one more SIP trunk with mediant 2000 [auodiocode-mp-124]-----[ * ]------[mediant 2000]-----E1 When i call from audiocode MP -124 phone i got this error -- Executing Dial("SIP/20-0889c4d8", "SIP/mediant/1")