similar to: kernel error with Zaptel cards

HI all, I have the following setup running: EP<--->Calling Asterisk<--->Relaying Asterisk<--->Softswitch<---> PSTN The Endpoint EP is registered with the Calling Asterisk. Calls are forwarded from this machine to Relaying Asterisk which in turn forwards it to the Softswitch. In addition, this machine also relays back responses from the Softswitch to the Calling

I have read thru what other users have tried in this list when they have experienced seemingly similar issues to what I have, without success. I suspect there might be an issue regarding both the X100P and TDM04b cards being used in an Intel SE7525GP2 motherboard, as I had to even wait for a BIOS update from Intel in order to utilize my 3ware 9500 SATA raid controller on it (3ware Kb -->

Hi, I am struggling to get rid of a conflict on DELL 2800 : PCI Parity error (EB113 on the display) I am learning linux and asterisk as I go along, there might be obvious things I should know, but bear with me. >From demsg below my 2 digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no

Breaking News - Powell resigns as FCC Chair Federal Communications Commission (FCC) Chairman Michael Powell announced his resignation today (January 21, 2005) and will step down in March. In a brief statement on the FCC's website (www.fcc.gov) Powell said, "Having completed a bold and aggressive agenda, it is time for me to pursue other opportunities and let someone else take the reins

Hi list, I use Dovecot's Pigeonhole Sieve implementation, and there is one little feature I'm missing: When a vacation message is sent, I'd like to keep a copy of that message in my "sent" mailbox. There is an RFC draft (draft-ietf-extra-sieve-fcc-09) for this, which adds a ":fcc" argument to vacation, but apparently it's not supported by Pigeonhole. I

Rich Adamson writes >>GMRS, FRS and MURS radios may not be interconnected with the PSTN (47 > > CFR 95.141). There has been a lot of talk from lobbyists to clarify this > > rule, but as it stands you could conceivably connect a *private* network > > to GMRS or MURS radios (you can't make any plugins or modifications to > > an FRS radio that isn't type

Hi Stephan, Thanks for your answer! > >> I use Dovecot's Pigeonhole Sieve implementation, and there is one >> little feature I'm missing:? When a vacation message is sent, I'd like >> to keep a copy of that message in my "sent" mailbox. >> >> There is an RFC draft (draft-ietf-extra-sieve-fcc-09) for this, which >> adds a

I don't understand why so many government sites fail to provide some sort of feed to their daily bulletins. What I am venting about in specific are the Canadian CRTC and FCC sites, every day I have to go to the website and when I reach the content, usually it isn't even HTML but a Word or PDF file. So finally today I decided to do something about it and wrote a little app that scrapes

I just installed an FXS module onto a 4 channel tdm thats about 5 years old and it wont work. Running dmesg I can see the following error: Zapata Telephony Interface Registered on major 196 Freshmaker version: 71 Freshmaker passed register test !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should

On Sat, 12 Mar 2016, Jeremy Allison wrote: > GPLv3 should guarentee that you can replace the Samba > on *any* device. That's the whole point of GPLv3 - no > DRM. > > If you find a Samba device using any Samba 3.2 or > newer that doesn't allow you to replace it, please > let us know so we can start the compliance process. I wonder how that will play out with the new

Hi pals, Pardon me if this question sound basic please. This is the first installation where I have to use the analogue card and therefore a little lusty. I have googled a lot, but though there is a lot of information about the above file, none indicate where the file lives. I have a installed asterisk and zaptel software on a fresh installation of CentOS 5. This all from source and following

> I'm not a FCC lawyer, just a ham. Seems to me all you could do is "sign" > messages and not send them if the sign isn't correct. ?The package itself > is in plain text. I'm not sure what the confusion or concern is. The intention is to use non-plaintext (but technically not encrypted) authentication without TLS over ham frequencies. Hashed challenge/response

I've had a few problems with my system holding the line after a call has been made, just now I rebooted and noticed the following in /var/log/messages Aug 13 17:23:15 Sheriff kernel: wcfxo: DAA mode is 'FCC' in the file wcfxo.c the following structure is initialised as below which would suggest that FCC is wrong for France or pretty well all of Europe. static struct fxo_mode {

Hello, Has anyone tried the combination of asterisk 1.2.24, zaptel 1.4.5 and HPEC 9.00.003? In particular, with a hardware configuration similar to: Module 0: Installed -- AUTO FXO (FCC mode) Module 1: Installed -- AUTO FXO (FCC mode) Module 2: Installed -- AUTO FXO (FCC mode) Module 3: Not installed Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) I have two fully independent systems

Hi there, I'm experiencing an echo problem and dammed If I can sort it out. We're running Asterisk on Fedora Core 3 64bit, installed as per http://www.voip-info.org/wiki-Asterisk+Fedora+Core+3. These are the specs of the Machine ? 1 x AMD A64/3500+ CPU: Desktop Athlon64? Retail w/fan SKT 1 x Asus A8N-SLI Deluxe Athlon? 64 S939 NVIDIA nForce(r)4 SLI? PCI Express Req: 24pin ATX 1 x

The Telco in Canada is been real painful. I was wondering if anyone has installed a Digium TE1X0P card in Canada and if their Telco was so difficult. The Telco will not provide us a service until they see a FCC or DOC number for the equipment ware are connecting to their service. If have found "FCC Part 68, ANSI/ITA-968-A, Including Amendment A1 and A2 Industry Canada CS-03"

I'm having problems with a TDM22B. The FXO modules work fine. Both FXS modules fail to initialized. The error messages I see when the module loads: Init Indirect Registers UNSUCCESSFULLY. Indirect Registers failed verification. I already RMA'ed a TDM22B because of this problem. Now that the replacement shows a similar issue, I want to see if anyone else can think of something to

On Sat, Mar 12, 2016 at 06:15:30PM +0100, Reindl Harald wrote: > > > Am 12.03.2016 um 18:08 schrieb Sketch: > >On Sat, 12 Mar 2016, Jeremy Allison wrote: > > > >>GPLv3 should guarentee that you can replace the Samba > >>on *any* device. That's the whole point of GPLv3 - no > >>DRM. > >> > >>If you find a Samba device using any

I am having trouble with chan_zap.so not loading. When I load it from modules.conf, Asterisk bails out without any error message. When I load it from the console, it just says "Unable to load module chan_zap.so" no matter what verbose level I am using. dmesg says: Zaptel Version: 1.4.4 Zaptel Echo Canceller: MG2 Freshmaker version: 73 Freshmaker passed register test Module 0:

Hi all, So I'm trying to work on this complex fax server setup, and part of it involves connecting my asterisk server to my Rolm CBX switch, via a T1 line. I plan on using Asterisk simply as a T1-PRI Bridge to IAXmodem (which in turn, activates HylaFax+ to handle the faxing). So far, though, I don't think I'm getting 100% of the way there. When dialing the fax extension from my