similar to: Polycom Auto-Answer

I have just started to play with callgroups and pickupgroups.. I updates my * from CVS this morning (about 15 mins ago).. I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf.. I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB.. Have I not configured

Hello, I am building an asterisk PBX with some stuff to make a usable VOIP / PSTN Gateway. I use the following devices: SIP Phones from GrandStream for VOIP side OpenLine4 from voicetronix for PSTN Side I am building things step by step with some priorities. I have now a working system able to place and receive calls from/to pstn. Before attempting to bring other functions (like voice

Hello, I understand that only the destination of a call should do jitter buffering. So, if IAX2/PhoneA calls IAX2/PhoneB through my server (no transfers), PhoneA and PhoneB need to perform their own jitter buffering, and Asterisk will just forward the frames, correct? What happens if the peer does not support jitter buffering, but is close by so there's no need for jitter buffering? My

Hello all, Not sure if this mail belongs to this users or dev list. Sorry about that. We have the following scenario: PhoneA OpenSER Asterisk PhoneB PhoneC | | | | | | | | | | | | | |

Hi, Below is my case. phoneA (PSTN) phoneB (SIP) phoneC (PSTN) phoneA --> asterisk --> phoneB phoneA (music on hold), phoneB --attended call transfer--> phoneC phoneA --connect-- phoneC after phone B hangup phoneA type some keys in keypad but phoneC always has wrong dtmf detection. In my case, I would like to know any factor that will cause the wrong dtmf detection.

Hi, I got a weird behaviour in asterisk (original found in 1.8 but it is still the same in 11.15.0). I have three phones communicating via OpenSIPs with asterisk. Phone A dials 100 and asterisk calls SIP/phone-b. Phone B accepts the call. The User on Phone B places the call on hold, dials 200 and, while hearing the dial tone of ringing Phone C, places the handset on hook. Phone B sends a REFER,

I can't seem to retrieve a parked call. Here is what I do: Call from phoneA to phoneB Answer phoneB Press Flash/Callwait on phoneB Press 700 to park the call A voice says that the call is parked at 701 When I try to dial 701, I don't get connected to the parked call Below is the asterisk output when I tried to park

This is a real 'newbie' type question, but I can't get my brain to work today. Is it possible to re-direct an incoming SIP call based on it's CLI? Ideally I would like to check incoming calls against a short whitelist (of say 20 numbers) and redirect to a different extension if there is a match. I would also like to redirect calls that fail to present any CLI (aka

I don't know if the is possible on not. I would like to know the easiest way to ring all extensions in the sip.conf file for intercoms. I have phone to phone intercom working.

Hi all, I have a problem with using remote MySQL database server with two Asterisk (1.4.17) servers. PhoneA registers with Asterisk#1 using realtime into MySQL on remote server and everything is working fine and when I call Phone A from Phone B (also registered with Asterisk#1) call is established. Problem is when I call PhoneA (which is registered with Asterisk#1) from PhoneC (which is

I have an ISDN line with 10 numbers. The line is then connected to * with one HFC-based card. The format of the numbers is like below: 123456-0 123456-1 ... 123456-9 Now I would like to connect those numbers to different telephones, i.e. when someone dials 123456-0, he/she is connected to the digital receptionist. If someone dials 123456-2, the connection goes to SIP/202 If someone dials

Hi, I'm looking for a way to reject a call remotely using the Asterisk dialplan. For example, phone A is ringing - I'm at the other end of the room next to phone B, and I want to reject the call to Phone A by dialing an extension. I'm basically trying to reproduce the Polycom "reject" action but through the Asterisk dialplan. Reasons: 1. It would allow me to

I searched and read all the relevant posts, but I still don't have a solution to my problem.. I've got a small queue for tech support calls using AddQueueMember. The agents are using IP300's from polycom. In my example, only one agent is logged int. When a call comes into the queue, asterisk sends the call to the one agent logged in. The agent answers and is talking to the

Hi All, I'm having a really weird can reinvite issue. I've been banging my head around on this for days now.. I have two asterisk servers. One at 172.20.0.11 One at 172.20.2.5 172.20.0.11 is a hosted box and serves multiple offices 172.20.2.5 is a box on site at a customer's office. A phone at 172.20.128.10 makes a call using server 172.20.0.11 to a phone at 172.20.2.80 via server

I've been digging around with some cisco engineers for about a week & I finally got an encouraging response to the Auto-Answer issue with the SIP Phones. Here is their reply: =============== == FROM CISCO == =============== Auto-Answer feature is introduced in SIP IP Phone 6.0 version. This software version is expected to be available for customers shortly. Please let me know if you

Hi, I'm testing paging using snom 360. Can someone correct my dialplan? Regards, Jason. ================================================== ;exten => _99XXXX,1,SIPAddHeader(Call-Info: Answer-After=0) ;exten => _99XXXX,n,SIPAddHeader(Call-Info: <sip:192.168.1.113>\;answer-after=0) ;exten => _99XXXX,n,Dial(SIP/${EXTEN:2}) exten => _99XXXX,1,Set(__SIPADDHEADER=Call-Info:

Does anyone have a working way of having a Cisco 7960 reload its config remotely. I have tried some of the scripts that I have found on the web, but to no avail. Thanks for the help. B. J. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040116/aa4eda3c/attachment.htm

There was a thread a few months ago that tossed around some ideas for using a cisco phone for intercom or paging. I don't have any ip phones, and wondered if anyone had any luck getting intercom or paging to work on the cisco units. Do any of the (cheaper) ip phones have a way to support intercom or paging? I presume that it's not part of the SIP or IAX protocols. Chris.

Hello, I am struggling to have a SPA504G to auto answer (for intercom/paging). I have tried the following SIP headers (not all together), but without luck: SIPAddHeader(Call-Info:\;answer-after=0); SIPAddHeader(Call-Info: answer-after=0); SIPAddHeader(Alert-Info: info=intercom); SIPAddHeader(Alert-Info: Ring Answer); SIPAddHeader(P-Auto-Answer: normal); Any other ideas? Leandro PS I have set

What models? Jeff Noxon (jeff-asterisk at planetfall.com) wrote*: > >I just purchased a bunch of Nortel Meridian POTS phones that support >intercom on the 3rd pair. I intend to get it working with Asterisk. >The phones support MWI, have a 3-line display, callerID, call waiting >callerID, 2 lines...very nice. > >On Thu, Feb 27, 2003 at 01:07:19AM -1000, James H. Thompson