similar to: DIALSTATUS with X100P

I am experiencing a very wired problem. Some of my cdr are lost. I use logging cdr to csv, mysql and odbc. But some of them are lost. They miss in csv mysql and odbc, so i'm pretty sure it is related to asterisk functioning. I am running asterisk 1.0.7; this is simple configuration file: extensions.conf [general] static=yes writeprotect=no [macro-gw-voipjet] exten =>

Hi List, I'm using VoIPJet and NuFone as a fallback, and it seems that both of them are circuit busy! Also it seems that VoIPJet takes forever to return 'circuit busy' while NuFone does it instantly. At any rate, is there like a reliable third VoIP provider I can use for fallback when the two others are busy? Cheers, Jean-Michel.

Is anyone using this combination successfully? I have a dell 500sc running rh9 and asterisk 1.0rc1. It is configured with an x100p. I have a Sipura SPA-2000, laptop with Xlite and a Grandstream Budgetone BT-101. I have signed up with Voipjet (they use iax2). I also have an FWD number via iax2. I can sucessfully call back and forth to all devices via zap, sip, and fwd. I can successfully

Just throwing this out here, hopefully someone can tell me why. *CLI> show version Asterisk CVS-HEAD-11/17/04-10:16:38 built by root@wanderer on a i686 running Linux Zap/g1 is pri_cpe to Bell Canada 5551234 is a normal POTS line I have busied out (handset offhook) exten => 1234,1,Dial(Zap/g1/5551234,,g) exten => 1234,n,NoOp(HANGUPCAUSE is ${HANGUPCAUSE} and DIALSTATUS is

i would like to carry some oversea pstn-destinations via sip to providers like stanaphone, however, in case of a network-failure or if the provider is not available, i want to fallback to the zap-channels so the call is carried out to the pstn directly. the usual approach would be to check the dialstatus(e.g.NOANSWER). however, asterisk tries >60seconds to reach that peer(even when the ip

Hi. I'm dialling two numbers - one that's unobtainable, one that's busy. ${DIALSTATUS} is coming back ANSWER each time right before the channels hang up. Am using the following dialplan macro to dial out. [macro-advdial] exten => s,1,Dial(${ARG1},20,g) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status

Hi, As of v 1.6.1.1, can anyone tell me what the current possible values for DIALSTATUS could be? I found http://www.voip-info.org/wiki/view/Asterisk+variable+DIALSTATUS but believe it is outdated since there is no FAIL or FAILED in this list. Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello Everyone. In my outbound contexts, I'm using "${DIALSTATUS}" to fail over to other routes if the chosen route rejects the call. Now, My current scenario is if I get "BUSY" back from the first provider, I send a busy back to my customer. If I get something like CHANUNAVAIL (Like a SIP 503) I advance to the next carrier and attempt the call. This works

Phone - TDM430P - home* - IAX2 - office* - PRI - Telco I dial a busy number from the Phone. Home* shows this in the CLI: -- Executing Macro("Zap/1-1", "dial-wu|2922004") in new stack -- Executing Dial("Zap/1-1", "IAX2/andrew@wu-ast/2922004||g") in new stack -- Called andrew@wu-ast/2922004 -- Call accepted by wu-ast (format gsm) --

What am I doing wrong? Goif dialstatus: busy CONGESTION not working. exten => _7NXXXXXX,1,Dial(SIP/7780${EXTEN:1}@pstn-5665,60,tr) exten => _7NXXXXXX,n,GotoIf($[$["${DIALSTATUS}" = "BUSY"] | $["${DIALSTATUS}" = "CONGESTION"]]?line2) exten => _7NXXXXXX,n(line2),Dial(SIP/9780${EXTEN:1}@pstn-1270,60,tr) exten => _7NXXXXXX,n,Hangup() When I try to

I try to connect to voipjet, but I get always busy, ... it worked yesterday, ... no changes on my side.... -- Executing SetGroup("SIP/615-829b", "iax-voipjet") in new stack -- Executing Dial("SIP/615-829b", "IAX2/17567@voipjet/011886228357765") in new stack May 20 18:16:26 NOTICE[9733]: app_dial.c:973 dial_exec_full: Unable to create channel

How many times do you ask for help here before getting a respone? Every single thing I do No matter what I get busy extensions. I am willing to pay someone to help here. Anybody got a clue? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050802/d0d1326c/attachment.htm

Hi all. We have a problem with correct dialstatus and cdr(disposition) when using call-limit. When call-limit reached dialstatus is CHANUNAVAIL and CDR(disposition)='NO ANSWER' -- Executing [0014 at sub_pbxdialco:49] Dial("SIP/1295-000001f8", "SIP/0014,12,tTkK") in new stack == Using SIP RTP CoS mark 5 [2013-07-03 15:22:27] NOTICE[29728]: chan_sip.c:6003

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to

Hi all, I am trying to make decisions in my dialplan based on {DIALSTATUS}. I am creating calls using AMI (rawman with parameters via URL) with action:Originate. I am using SIP and an outside voip provider for the calls. If I define the number to call in the Channel parameter (e.g. SIP/15555555555 at myvoipprovider, the call gets placed before entering the context that I defined. I understand

Hi, I'm trying to implement dynamic routing of incoming calls to local extension if previous outgoing call was unanswered. But after I do Goto to s-NOANSWER, variable ${EXTEN} changes to 's-NOANSWER'. I guess this is normal, but I don't understand why ? How to workaround on this one ? Thanks in advance, regards, Rob. [outbound-capi-ISDN] exten => _0.,1,NoOp(Calling ISDN

For outbound only, I have traditionally recommended VoipJet. They just recently has a spat of issues that seem to have resolved though. I am still using them via their east coast server and it seems to work quite well again. Cost is around 1.3 cents minute I believe. Use IAX and g711 for best quality to VoipJet. Thanks, Wiley -----Original Message----- From:

In our setup, outbound call volume frequently exceeds the line capacity of the DSL line. We do not want to move to another codec to better utilize the line, but instead wish to automatically divert overflow to the Long Distance T1 when the DSL is "full". Ideally the system would also be able to adjust automatically to network conditions such as network outage, high latency, jitter and/or

So far my experience with TOS has been that most of them are pretty odd. No one wants the liability of a stock trade gone foul or a call to the doctor that gets disconnected. Essentially, those things in the TOS are just a CYA. They are un-enforced but should someone decide to attempt to sue based upon a financial loss, the ITSP is covered. So, yep. That is weird but not unexpected. Heaven

I am trying to tweak my dial plan and I am running into a problem. Sometimes my VoIP out bound calls do not complete on overseas calls(busy or just a hang-up). Is there a way in the dial plan to automatically dial out of my PRI when something like this happens. Either by time limit by a failure event? Any point in the right direction would be great Thanks, CLI output (cleansed to protect the