similar to: playing "i" invalid context to an internal user

When I use DISA I get congestion when I try to reach 1-800-number: Here is the context: [disa] exten => 087,1,Answer exten => 087,2,DigitTimeout,8 exten => 087,3,ResponseTimeout,20 exten => 087,4,Authenticate(985) exten => 087,5,DISA(951|disa-access) [disa-access] include => tollfree include => outgoing-voipjet [tollfree] ; ; terminate toll-free no.'s via fwdnet ; US

How do I solve the problem with between patterns: _1800 _1NXX I would like all numbers 1800, 1877 etc to go through iaxtel but all other numbers 1xxx via voipjet Example in my extension.conf I have: [iaxtel] exten => _1700NXXXXXX,1,Dial(IAX2/xxxx:xxxxx@iaxtel.com/${EXTEN}@iaxtel) exten => _1888NXXXXXX,1,Dial(IAX2/xxxx:xxxxx@iaxtel.com/${EXTEN}@iaxtel) exten =>

Last night Mark and I made some changes to the IAXTEL tollfree outbound, and inbound access. The inbound access number has changed to: 248-724-0700. (This number is in Pontiac, MI Ratecenter, and is supplied by Telesthetic LLC, a next gen phone compnay) This number will say "Please dial your number now" at that point you can dial your 1-700-XXX-XXXX IAXTEL number assigned. In the

Hi, I recall seeing a sample extensions.conf file that allowed tollfree calls to be routed via iaxtel to the US and the NL, but I must be going blind, because I've scoured the list but can't find it. Can someone send it to me if they have it? Much appreciated. Thanks! --- Paul Cheng M?ty?s kir?ly ut 10 H-1121 Budapest HUNGARY paul.cheng@alum.mit.edu mobile: +36 30 381-9311

I have an interesting dilemma with sequencing in the dialplan. Up to now, I have assumed that the extensions in the dial plan were tested in the order that they appear in extensions.conf. In other words, I have the following fragment which was designed to dial toll free on the PSTN and all other long distance on VoIP: [longdistance] include => local

SIP SECURITY WARNING Version: v1-0 (cvs today) Problem: sip context in general section ignored - goes to default - allowing unauthorized sip devices to place calls in default context Fix [workaround]: Remove or rename "default" context in extensions.conf Notes: I am not sure what other asterisk functionality may be affected by this - review your other config

I was wondering if there was a way of setting up the dialplan in a way that if you dial an extension that is NOT in the dialplan then it would play a not-in-service gsm file and then play congestion tones. I would rather like this better than just hearing a busy signal on my phones.. I DID search around on the wiki and using google and could not find anything. Thanks. -- Stephen Rosebush,

> -----Original Message----- > From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users- > admin@lists.digium.com] On Behalf Of Robert Withrow > Sent: Tuesday, June 15, 2004 12:32 PM > To: Asterisk-users > Subject: RE: [Asterisk-Users] making * more like a normal pbx (ciscoata- > 186) > > On Mon, 2004-06-14 at 19:34, Reid A. Forrest wrote: > > I've

Hey all, I'm pretty new to Asterisk and VoIP in general, so I'm hoping I can get a bit of help here. First I'll explain my setup, and then my problem. Right now I have a Cisco 3640 with a VIC2FXO card in it which has 2 FXO ports. I have an analog phone line plugged into the first port (voice-port 1/0/0). I've got it setup so that calls coming into that analog line are

I have a setup of 3 Cisco 7940 running Sip image 6.3. All these phone are registered by the below information *CLI> sip show peers Name/username Host Mask Port Status 2002/2002 192.168.22.199 (D) 255.255.255.255 5060 Unmonitored 2001/2001 192.168.22.200 (D) 255.255.255.255 5060 Unmonitored 2000/2000 192.168.22.198 (D)

I've got a need to do something like the following: [foo-context] exten => _.,1,SetCIDNum(123) exten => _.,2,SetCIDName(XYZ) include => local include => tollfree But of course, this example won't work. The goal here is this: if a call ends up being handled by the "local" or "tollfree" contexts, I want those SetCID*** commands executed. Otherwise, I

I have been playing around with asterisk for a week or so now and haven't had too much trouble getting things to work but one thing seems to puzzle me. I have been patient hoping that there was a configuration error on the server or that the toll-free gateway was down but nothing has changed. I have the following configuration context for IAXTEL: [iaxtel] exten =>

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

Does anyone kmow what these errors mean or how they can be fixed. I'm using asterisk on a Fedora Core 2 box with a TDM400P with 2 fxo and 2 fxs ports. Dec 29 17:17:52 WARNING[6019]: chan_zap.c:5469 ss_thread: Channel Zap/4-1 in prering state, but I have nothing to do. Terminating simple switch, should be restarted by the actual ring. -- Hungup 'Zap/4-1' == Starting post

I am using version: CVS-v1-0-12/13/04-18:46:23 with a TDM400p (2 fxo, 2 fxs ports) and I keep getting errors along with phantom calls: Dec 21 16:02:07 NOTICE[5872]: chan_zap.c:5363 ss_thread: Got event 17 (Polarity Reversal)... Dec 21 16:02:14 WARNING[5872]: chan_zap.c:5434 ss_thread: CallerID returned with error on channel 'Zap/4-1' my analog phone reads caller ID info fine when

Hello, all. In section 4.3.10 of the Asterisk Handbook, there is an example of an LCR/Failover Trunking scenario. I've tried it, and it works, as long as I fail over from something else to ZAP, but I can't get it to "hunt" to the other context if the zapata channel (or group) is used first. Can anyone help? Here is my extensions.conf, and the error message I get.

I am trying to setup a simple pstn gateway using Asterisk and a X100p card. I have got everything installed using Redhat 9 and am able to load Asterisk. I also configured sip and I am able to connect to the asterisk gateway with Xlite on the windows side. I am able to dial 1000 and get the welcome message. What I am NOT able to do is dial a seven digit local or 10 digit long distance number and

I'm still a newbie in Asterisk, just yesterday installed it for home use (so I can call home while travelling). Using AVM A1 (BT Speedway) ISDN card. Anyway, I find it very hard to locate supporting information for Asterisk. User's Handbook is still a draft, this mailing list is not easily searchable, and any info out on Usenet is scarce. I spent some 30mins just trying to find out naming

I have set up FWD via IAX service. I have tested the IAX service with 613, echo test, and 612, saytime. It all works well. However when ringing a FWD user, I got this error all the time: Connected to Asterisk CVS-v1-0-02/01/05-09:34:45 currently running on chat (pid = 8282) chat*CLI> Verbosity is at least 3 -- Executing SetCallerID("SIP/1001-a1fb", ""David

When somebody call me on my pstn # cable connected to my fxo card it does not work when I check my computer the following error shows Connected to Asterisk CVS-v1-0-12/05/04-19:46:25 currently running on asterisk1 (pid = 2160) Verbosity is atleast 3 -- Remote UNIX connection -- Starting simple switch on 'Zap/1-1' == Starting Zap/1-1 at incoming,s,1 failed so falling