similar to: hint and contexts

Hi, I am trying to use the support for monitoring extension states of a snom 220. In the extensions.conf file I added: exten => 770,hint,SIP/770 It means that when the snom phone boots, it will register it-self to asterisk as a monitoring phone for 770: Asterisk knows that the SIP/770 is monitored. I am using the 3.56q-beta firmware. It is in the DESTINATION option as it said on the tiki

Hi, This is a weird request, but does anyone have a Snom 360 monitoring extensions for BLF on several Asterisk servers accross a network? Alternatively, can anyone give me a pointer as to how to setup a Snom 360 to monitor an extension not on it's own server? My scenario is that I have a main site which will have its own server (for storage of call recording data etc because the remote

Hi List. I've used 3x Snom 200 in a hotel environment for a year, all of them have failed at some point (1 went up in smoke, 1 handset failed, 1 display failed). I have 110 grandstream phones there of which only 3 have failed (whereof 2 due to brutal abuse), and in another company I have 75 Cisco 7940 (SCCP Firmware) phones where not a single one has failed (during 2 years). I have no

The snom 200 and 220 have five programmable buttons. Each button has a led that can be used to indecate if an extension is idle, in use, or ringing. A button pannel for the 220 is also comming out soon that will have 20'ish programmable buttons on board. This is a killer app for any company that has receptionists handle calls, and pretty usefull for everyone else. As a matter of fact,

It's very possible that the Polycom IP600 will work with this. As it is just an implementation of a SIP standard for subscribing to the state of other extensions. As for the feature improvements you might see them from me, but not very likely. It is easier for me to train my customers to hit *8 (I will probably just program a pickup button for them) than it is for me to figure out what I

Hi, Are there any resellers of phones that can take power over ethernet in Australia? All I can find for sale online is the BT-10[12], which is cheap but not featureful enough, and the Snom 190, which is about right, but neither of them support PoE. I'm particularly intereseted in the Snom 220 with the keypad expansion for our receptionist. Although, could you make a PoE split-out cable

Hi there Our company is using the Linksys SPA-942 Phones, and they are pretty useless. They dont have any central management or provisioning, as well as a pretty bad interface. Can anyone reccomend any voip phones( Cisco, Polycom, SNOM ) that have * Central Management for all the phones (We dont mind if we have to buy the software to manage them) * Programable shortcut buttons, So i can

I'm looking for an enhanced speed dial "dashboard" as DSS (Manager integration) for Operator console integrated in a voip phone (softphone or hardphone, opensource or commercial) to diplay the status of phones (sip, zap, iax...) connected to asterisk. I see in snom site the snom 220 with keypad 220. Can it display the status of internal and external lines (free, busy..) and

We are running * 1.0 and have 6 snom 200's and one snom 220. the line hints work until I issue a reload command and then the snom hints stop working. I can re-create this scenario on 2 systems and with snom 190's also. is there a way to fix this? the only solution I can come up with is to reboot the phones. Thanks in advance, Justin

Hi everyone, Has anyone used a Snom 220 with Asterisk? It's meant for a receptionist (as far as I can tell), and therefore has a ton of buttons to facilitate transfers between and to many extensions. I'm wondering how well it works with Asterisk. We use Snom 200s in the office, and they're great. I'd appreciate any comments you may have. Regards, Ranbir -- Ranbir Systems

Sorry Newbie asking everyones option. I am setting up a couple of small asterisk phone systems for my work, I started using some snom 190 and bt102 sip phones (the bt102 works really well with iLBC), but the complaint from my workmates is there is no way to see if other people are on there phone or not, or what lines are being used. The snom 190 only has 5 function keys, the snom 220 seems a bit

I am having a hell of a time with transfers. First the Snom issues: The transfer button on the Snom 220 does not work. I have read about setting break key off in the advanced page of the web config but the Snom 220 has no such option. At the moment I am having to use the # transfer hack which makes this phone look really stupid to have buttons on it that cannot be used. Anyone know how to

Can anyone help with BLF for Snom 300s ? (Asterisk 1.4.10.1) I've setup hints for a couple of Snom 300's but Asterisk doesn't send Extension Changed messages to subscribed phones unless the second 'line' button is used (I've tried Snom's version 6 and 7 and two difference 300s). On the Asterisk Console I don't see any message when picking up a Snom 300 and dialing

Hello all! I have a few problems with Snom 320 phones: Problem A - Transfer out of Queues: We have a call center with some Snoms. We are using Queue and AgentCallbackLogin. As we run * 1.2.7.1 an agent could transfer a call out of the queue using the hold and transfer buttons on the Snom. This might have been the wrong way to do it all the time I found out later, but it worked. Now we upgraded

In the 'me too' vein, I also have an untested 3624 here on the shelf and am waiting on a shipment of T100 cards to play with. Documentation is very hard to come by. Alcatel are certainly the owners of the Mainstreet product line but, without a support contract, any documentation they may have is essentially unavailable as their per-incident fees for support cost more than most of the

I'm trying to get call parking working with the lighted buttons on the SNOM 200. I have set the 5 buttons to "Park Orbit", for extensions 700-704. Pressing the first button (x700) does park the call. However, the remaining buttons (x701-704) don't allow me to pick up parked calls, or show parking status via the LEDs. I can only pick up parked calling by manually dialing the

Hi, does the hint extension work together with the Snom phones in stable? I don't get an error in the dialplan, but it does not work either. On SIP/26 I want to monitor SIP/22. This is what I do right now: extension.conf [incoming] exten => 955,hint,SIP/22 exten => 955,1,Dial(SIP/22) sip.conf [26] ... subscribecontext=incoming ... Running Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b TIA

Has anyone written a php/perl or a hack to the 'hint' function in Asterisk that will let you monitor a MeetMe conference? So if anyone was in a conference, I could have a button light up on my Snom 360?

Good day all I got my snom 220 phone so that it displays on the buttons if someone is calling that extension I just added "exten => 403,hint,SIP/403" in my dialplan But These lights only comes on if someone calls that extension,not if that extension is busy are a call is made from that extension Can this be done? Please Help Altus

I have many remote locations that dial into a central server to retrieve voicemail via IAX. Outbound calls are handled as SIP calls from a Snom to a local (to them) Asterisk server that dials the main server thru IAX. I have trained them to check their voicemail via the emailed WAV file, however some of them are, how shall I put it, idiots*, and insist that they *have* to have the MWI indicator