similar to: TFTP Server

G'Day All. So I got the TFTP server all set up -thanks to much help from this list- the 7960 found it and updated to SIP the first firmware P0S30200. What I am now trying to do is upgrate through all the versions, as recommended, to the latest version, P003-07-3-00. I thought this would be accomplished by simply changing the sole line in the OS79XX.TXT file to P0S30203 and reboot the phone.

G'Day All; So I purchased a Cisco 7960 and am now trying to get it configured for *. No can do without the variuos files/images through a FTPF server. I configured the TFTP server on my RHES 3 box, now to get the required CISCO files. So I contacted CISCO to purchase the required maintenance contract so as to gain access to the download area for the files/images. -WHAT A FRUSTRATION!!-

G'Day All What do I type at the command line to stop and start * on a RedHat ES3 box? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041202/f9c92727/attachment.htm

G'Day All, Newbie here. How can I go about troubleshooting a fast busy when I dial my the phone number on my * server? Thanks. Ferg -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041012/a669d795/attachment.htm

Thanks everyone for your feedback, especially Mark. I now have the ALL the files I need. My order still stands for the $8.00 product from CISCO but the CP7960 dealer sent me all the files. Now I will move on to completeing the setup of the TFTP server. Thanks again -----Original Message----- From: Michael Loftis [mailto:mloftis@wgops.com] Sent: Friday, February 18, 2005 7:51 PM To:

G'Day List, Can someone help me out a bit please. I just installed Fedora Core 3 on a Dell Power Edge 400 SC and am trying to install * I am following http://www.voip-info.org/wiki-Asterisk+Step-by-step+Installation After running: cd /usr/src/asterisk make clean make make install make samples The instructions says: Configuring Asterisk - Login to your server as user

G'Day All, Can someone help me out please. My new CISCO 7960's manual says I have to setup a TFTP server. Googled it and got a little understanding, but from * standpoint, well I am still a lost. Can I set this tftp server on the same * box? Can in be on a WinXP box? Which tftp software would you recommend? Thanks much. BTY: Does anyone have a How-To on getting the 7960 fully configured

G'Day All, Greetings and best wishes. Many moons ago I had an Asterisk system running. Steve Totaro helped me quite a bit. Just now I installed Asterisk NOW 1.5 Beta, and am at the command prompt.....I thought there was a GUI with Asterisk NOW. Anyway, where can I find the install/config documentation or how to launch the GUI, as I have look around on the site but cannot locate it.

G'Day All, How do I fix this: I receive a call at the extension. Press the hold button. Music on hold starts. When I place the handset back on the cradle, the call gets hung up/disconnected. The Phone is A GrandStream Budge Tone 100. Thanks

Hi List, Using Lattice, I have created a plot of histograms showing Fork Length by Year. The plot shows the histograms in 3 columns and 5 rows. Using the as.table=T function I can get the years to start on top. However, what I would like to do is have the first year start in the top left (column 1, row 1; as it is now) and add the subsequent histograms to the plot going down the column and then

G'Day All, I have read a lot but still have not got the concept in my head. My ultimate goal is to setup asterisk with VOIP at my job but am working on setting one up at home first. I have a 10/100 network at home with Cable broadband and would like to setup a server with RedHat and Asterisk. Do I MUST HAVE a VOIP provider so as to be able to make and receive calls VOIP? What should be my

Same here. I called them yesterday plus email and still no reply. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of brett-asterisk@worldcall.net Sent: Friday, January 21, 2005 10:28 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Webmin Module for Asterisk (and

I think I finally have nailed down the problems with TFTP on the 4.10 branch, and so I have released 4.10-pre20. Please let me know if you have hardware on which 4.05/4.06-pre3 works, and 4.10-pre20 does not. -hpa -- H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.

Hello, ?? I am a fairly experienced user.? I have set up tftp in the past at various times, although it's been a few years. I am using version... Version????? : 5.2 Release????? : 37.el9 On AlmaLinux 9.3, I currently have SELinux disabled. ]# firewall-cmd --list-services cockpit dhcp dhcpv6-client http ssh tftp I have tftp enabled on the firewall.? ( I have tried with the firewall completely

-------------------------------------------- On Sun, 10/20/13, Gene Cumm <gene.cumm at gmail.com> wrote: Shantanu, could you please try v6.02?? Your scenario failed on my OptiPlex 760 but with 6.02, it works. See also http://bugzilla.syslinux.org/show_bug.cgi?id=19 Nope, still no joy on the physical machines. Different symptoms though. On the physical machines: The HTTP starts

I have got a Solaris 9 package build from the latest tftp software at ftp.kernel.org. When I do the following: ./in.tftpd -l -s /tftpboot -m /tftprules -v The tftp server does not start. The error in /var/adm/messages is "too many -s directories". If i do ./in.tftpd -l -s /tftpboot -v then it works fine. But i need remap feature for my project. The message I get when i do

I've used TFTP server on CentOS/RHEL 7 and 8 but not 9, so take my notes with the appropriate grain of salt... JIC, confirm on the TFTP server you have a process socket for it, e.g. $ netstat -a | grep tftp udp 0 0 0.0.0.0:tftp 0.0.0.0:* Your 'systemctl status' output implies things are OK, but worth a check. I don't see a "tftpboot" symlink

Hi, I have a question on tftpd on Slackware - I know this is an embedded Linux forum, but I think it still must be the appropriate place to ask. I have hpa-tftpd V0.40 on Slackware 9.1. No matter what I do, I can't get files transferred to the tftp server. I just get timeouts - no messages in /var/log/messages or in /var/log/syslog - just dealthly silence. This is the configuration line

Has anyone had any luck with moving files outside of /tftpboot? Its been particularly frustrating in my environment to support files within this directory. Especially since I support three different architectures and need to differentiate their boot loaders, kernels, configs, initrd's, etc. I'd really like to symlink off to my AFS space and let the sysname values do the work. Is there a

Hi all, wasnt sure whether this was the best place to put this information; but something seems to have gone 'backwards' in the later pre-releases of 6.03 regarding network booting. below are results of me testing - i did each a few times to make sure they are valid results. hope it helps identify something that's gone awry ? so far, 6.03 pre11 and pre13 (excluding efi32) seem most