similar to: [Fwd: Asterisk to Asterisk via IAX2 Help]

Hi, I have two asterisk machines, chomper and otao. otao is otao.ieworks.net, has a public IP address (66.101.11.61), but no PSTN connections. chomper is at my house, behind NAT, but has a single X100P PSTN connection. I would like to establish two way calling between otao and chomper. Right now, I can call my extension on otao (2101) from my x-lite softphone on chomper, but I cannot call

Hi, I can't receive/send calls with Asterisk. Could someone please give me a few pointers on my configuration? Regards, Norman Zhang ; sip.conf [general] disallow=all allow=ulaw port=5060 bindaddr=0.0.0.0 externip=x.x.x.x localnet=192.168.22.0 mask=255.255.255.0 context=inbound-sip maxexpirey=180 defaultexpirey=160 tos=reliability srvlookup=yes register =>

Hi, I'm trying to get my X100P to Dial the following sequence to gain access to speed dial numbers on my Norstar PBX that the X100 is connected to... [FLASH] [*] [0] [22] (where 22 is the speed dial number) But so far I've had no luck, with the following extension:- exten => 922,1,Flash(${DIALOUTANALOG}) exten => 922,2,Dial(${DIALOUTANALOG}/*022) exten => 922,3,Congestion

Hi, I would like to use a digum card to call an external number through my PSTN. I think that I have a problem in the configuration. Asterisk returns me app_dial.c:764 dial_exec: Unable to create channel of type 'Zap' I use Fedora core 3. I installed libpri, zaptel and asterisk. I plugged my line on the FXS module (green part). I make modprobe zaptel && modprobe wctdm without

I have some strange behavior happening with call flow when analog line errors are encountered. This may be due to the way that the X100P detects "busy" signals, or it may be something in the software. Could someone with more in-depth knowledge make a comment on the items below? My dialing logic says "dial local area code numbers out of the analog line, and if the analog line

I am trying to send calls from (telx-NY17S) to (telx-nyc) via an IAX2 channel. However the call is being rejected on the (telx-nyc) server. See error below copied from telx-nyc CLI> Apr 22 13:56:57 NOTICE[147465]: chan_iax2.c:5390 socket_read: Rejected connect attempt from 192.168.0.251 I have icluded the following conf files 1. extensions.conf (telx-nyc) 2. iax.conf (telx-nyc) 3.

Hi, I am looking at http://www.theschmandts.org/blog/?p=28 to setup missed call notification but i am having issue. following is my dialplan [macro-stdexten] exten => s,1,Dial(${ARG2}) exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER) exten => s-NOANSWER,1,Voicemail(${ARG1},u) ; If

Hi folks! I bought a X100P a while ago and know I've tried to get it working here at home again ... but I can't manage to get my X-Lite client working with Asterisk (CVS from a day ago) ... I've downloaded the latest version of X-Lite and I believe that I've set it up correctly ;-) But I cant get it to register with my Asterisk - I only get "Login timed out, contact your

Dear all, I have written a function for calculating the volume of a tree (=trad) or snag (=h?gst). The included volume regreesion model includes ten parameter values, which are tree species specific. bj?rk.formh?jd.pars is an object which includes the parameter values (parameter set) for birch (=bj?rk). There is one row per tree in the data object. > relev.kols[1:5,

I tried putting this as the ata's dailplan: *St4-|#St4-|9|^9t4>$.- this is sip.conf [ata2001] type=friend username=ata2001 secret=SoMeSeCrEt host=dynamic context=fromata canreinvite=no and this in extensions.conf [fromata] ignorepat => 9 exten => _91700NXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel) exten =>

Hi asterisk users, I have a inssue with incoming calls with wcfxo card, while receiving a call, I?ve configured my dialplan to forward the call to all mi home voip extensions and that works just fine, but while in the call, after a few seconds, the pbx starts the simple switch once more and keeps ringing the voip extensions log as follows:

Hi, I have configured the cdr throught ODBC with this files: /etc/cdr_odbc.conf [global] dsn=asterisk2 ;loguniqueid=yes dispositionstring=yes table=cdr ;"cdr" is default table name usegmtime=no ; set to "yes" to log in GMT hrtime=yes ;Enables microsecond accuracy with the billsec and duration fields /etc/cdr.conf [general] enable=yes unanswered =

hi all: the following scipt is wokring perfectly with limiting ...on limimitng per ip basis.. ---- eth0=public static ip eth2= private ip ( 192.168.2.1) -- iptables -t mangle -A POSTROUTING -s ! 192.168.0.0/32 -d 192.168.2.101/32 -j MARK --set-mark 21012 tc class add dev eth2 parent 1:1 classid 1:2101 htb rate 32kbit ceil 64kbit tc filter add dev eth2 parent 1:0 protocol ip prio 2 handle

ESTIMADA COMUNIDAD R, Tengo un data frame de datos de salud sobre Enfermedades de Notificacion Obligatoria. Algunas variables tienen una codificacion 99, 999, y 9999 para asiganr los valores perdidos. LAs variables que tienen esta codificacion son la EDAD, COMUNA_RESIDENCIA y la REGION_RESIDENCIA, respectivamente. Me gustaria poder editar esos valores a NA, sin tener que hacerlo uno por uno con

I've google for hours trying to find a discussion of a similar problem as the one I'm having, so forgive me if this has come up before. If it has, please point me in the right direction! The problem occurs when a caller (A) is transferred by an intermediary party (B) to voicemail (Voicemail or VoicemailMain), either directly or by being taken to voicemail when the callee (C) doesn't

CentOS Errata and Security Advisory 2019:2101 Low Upstream details at : https://access.redhat.com/errata/RHSA-2019:2101 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: dbfa835039594a636a9188545655af04b0e9fd51698aa498487d0b584cb89ddc exiv2-0.27.0-2.el7_6.x86_64.rpm

CentOS Errata and Bugfix Advisory 2020:2101 Upstream details at : https://access.redhat.com/errata/RHBA-2020:2101 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: af716ec243d4e4b5b485e49c939db05866ec42a73335d40b40039f65a88dfd50 python-syspurpose-1.24.26-3.el7.centos.x86_64.rpm

https://bugzilla.mindrot.org/show_bug.cgi?id=2101 Bug ID: 2101 Summary: Unaligned memory access on sparc in UMAC implemetation Classification: Unclassified Product: Portable OpenSSH Version: 6.0p1 Hardware: Sparc OS: Solaris Status: NEW Severity: normal Priority: P5 Component: ssh

> -----Original Message----- > From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users- > admin@lists.digium.com] On Behalf Of Robert Withrow > Sent: Tuesday, June 15, 2004 12:32 PM > To: Asterisk-users > Subject: RE: [Asterisk-Users] making * more like a normal pbx (ciscoata- > 186) > > On Mon, 2004-06-14 at 19:34, Reid A. Forrest wrote: > > I've

Hi, I have access to two providers. On one of them the authuser is the same as the username, so outgoing works. On the other one I can only get incoming - what ever combination I try for outgoing I get an error. The register command has the ability to specify both usernames (which is why incoming works) but outgoing doesn't seem to, and without that I'm stuck. They are defined as: