similar to: Custom Menu Not Working

Hi, I'm struggling to get busydetect to work. I'm using asterisk 1.2.1 and a digium TDM04B (4 port FXO) card. I've set busydetect=yes, busycount=6 and busypattern=300,200 in zapata.conf and i've modified zondata.c with a busy setting of 620+480, 300/200 which is the busysignal received from Korea Telecom. Asterisk isn't detecting the busy signal and doesn't hangup.

Folks, First off, this is messy, and I hope someone will be kind enough to help me clean this up (the part added to extensions_additional.conf). You've been warned! For those of your using AMP or A@H, there has been a lot of talk about how to route incoming calls to different places based on which trunk is ringing. The standard answer is that you can only do this by using DIDs,

Hi All After lots of try I was successfull in connecting to PSTN to make and recevice calls , I used AMP for this purpose , now I wanted to try out this Asterisk server answers the call , ask for the extensions and then after the extension entered the call is forwarded /transfered to the extension no , I use Asterisk 1.2.4, configured using AMP , on RHEL3 I did some configuration for my

Hi Daniel, Am 27.03.20 um 09:24 schrieb Administrator: > Hangup is h extension. your macro will never be executed. Solution: > > same = n,Dial(whatever) > same = n,[...]) > same = n,Hangup > > exten  = h,1,1,DumpChan() >  same = n,System(/home/asterisk/bash_test) I don't really understand your code… I think I don't have to edit the first part of the conf file

Hi All; Using the FreePBX, after I added the extension from the GUI, I discover that it is automatically added in the extensions_additional.conf in the context [ext-local] and [from-did-direct-ivr] How I can change these context name? I need to determine this. How? Regards Bilal

Hello- I have a low traffic AAH setup, a few hardphones, a few softphones, 50 calls per day max. I used the AMP Digital Receptionist to make a simple voice menu: "Thank you for calling xxxx". I did this for both Normal times and After Hours times. It worked fine. I then went to the AMP Maintenance window, Config Edit, got the "phpconfig for Asterisk PBX" page, and selected

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to

How many times do you ask for help here before getting a respone? Every single thing I do No matter what I get busy extensions. I am willing to pay someone to help here. Anybody got a clue? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050802/d0d1326c/attachment.htm

I would like to setup an option in my digital receptionist that callers can select to hear a read back of their Caller ID. It would be something like, "the number you are calling from is...". I think I can reuse the festival script that is built in, but ideally this could be accomplished without using festival because Allison's voice is so much more pleasant. I'm just a few

Hello: We have a TDM2433E Digium Card (12 FXS, 12 FXO) and Asterisk 1.8.7.0 running. Everything seems to be ok but call transfers. This is the issue: *A, B, C and D are in FXS ports*. 1) A calls B. B anwers. 2) B tries to transfer the call to C dialing *2 (code for attended transfer). 3) A hears MOH. B dials number C. 4) Asterisk says the dialed number is incorrect or non existing. We tried

Greetings *`s, I am manually creating call files and dropping them into /var/spool/asterisk/outgoing to be picked up by *. Presently, when I use local/internal parameters using SIP it works..ie I make an internal call from device to device. However, when I try dial an outside number which I have set up in a custom conf file, it bombs out with the following message :

I know almost nothing linux, and don't really know that much about Asterisk (proper).. but I was 'pulled' by this subject and grabbed an <mailto:Asterisk@home> Asterisk@home installation CD (version 1.3) and just went with it. Newbie doesn't quite describe it, I'm a banker.. this simply goes to show how easy Asterisk is becoming (I certainly hope this direction was meant

Hi everybody, we use Asterisk to route all calls to a inbound phone number to a specific outbund mobile phone number, depending on time and date. I'd like to send a notification email to a specific email address, each time we receive a call. For this I used the tip of "dicko" here [1]. I'm a Asterisk newbie. Unfortunately it doesn't work. The System() command is not

Hi All; If I set a context other than the default context, then I do not see a generation for a configuration in the extensions_additional.conf for this context, but always the generation for the configuration is for the default context (from-internal). Normally, I have to put some Phones in a context and another Phones in a context, and give each context a privilages, but if I do this, then I

Hi all I have installed AAH 2.2 in my P4 PC following AAH handbook PDF and http://mundy.org/blog/index.php?p=62#amp and made as per the guide says and downloaded SJ Phone, and registered user and when i try to dial the 19197543700 i get message that, all circuits are busy now, please try your call later and when i see in the console i get this mesage any help Called easycall/19197543700

I am new to Asterisk and the protocol/language complex world of VoIp and PBX. But I have a dedicated machine running A@H 2.8, a single TDM400P with one FXS module card connected to a standard analog phone. The second card is an X100P connected to my analog PSTN phone line. I also have Grandsteam IP phone plugged into the network and a couple of x-lite SIP softphones. I can make outgoing calls on

You'll need to create a trunk between the two systems Then configure your out bound routing to use that trunk Eg if you use 1 as the prefix for the trunk BOX A Ext200 will call box B EXT201 by dialing 1201 -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Ronald Wiplinger Sent: Sunday, 19 June 2005

Hello, I'm using digium E1 cards and serving SIP users at Asterisk. After the following call (see below) CDR shows two records. First looks as outbound call, but the second - as inbound call. Is it a bug or intended behavior? Call flow: SIP (ext: 100) -> ZAP (national number) SIP (ext: 100) transfers to SIP (ext: 200) SIP (ext: 200) -> ZAP (national number). In CDR it looks like

Hi list I have a requirement that I just don't know how to address - I don't think its strange but can't find any pointers anywhere. I have a user that wishes to have a "multi phone" divert. By that I mean "calls made to his extension say Ext200 can be redirected to a different extension say Ext400 and also to his home landline. Doing the dial is fine using

do you have selinux enabled? It should not be. p p.s. - if it comes to re-installing, you can backup all your settings with the freepbx backup utility and then restore so that you don't have to re-enter everything. From: "Lachek Butalek" <lachek@gmail.com> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Date: