similar to: some questions about busy detection

I'm trying to get the X100P card working in AU. So far I have managed to get it to handle incoming calls from the PSTN and have managed to eliminate pretty much most of the echo. My big problem is getting the outbound calls to work. When I get ZAP to dial out it won't connect and I get what I think is the Congestion signal - like a busy signal but with what appears to be a 10db

Hi, is it possible to detect 4 length pattern busy cadence detection on FXO lines in 1.8?? Here the tones are: 425Hz Pattern(0.2ms on, 0.2ms off, 0.2ms on, 0.6ms off) in asterisk 1.4 busy detect worked in asterisk 1.6 didn?t work and i was told that 1.6 can?t handle 4 length patterns, but what about 1.8?? for now I can only hangup by asking the provider polarity switch. Thanks best

Is there a way I can change the ring cadence on FXS lines on a system using a Digium Wildcard TDM2400 card? I recently deployed a new phone system, and the customer has a few POTS phones in areas where they don't have data network services, so we're using the FXS lines to provide dialtone at those outbuildings. The old phone system would ring those phones with a short ring-short

Hi Vic, I hit that same problem! My SIP phones would sound okay when I made changes to indications.conf but incoming calls in to my TE410P had their own thing going on! Have a look at the zaptel source files, there's one called zonedata.c. You'll see the au settings... replace what's there with this: { 1, "au", "Australia", { 400, 200, 400, 2000 }, { {

Hi, I read section 5, oop, of the R lang doc, and I am still not sure I understand how to build a class in R for oop. I thought that since I understand the oop syntex of Java and VB, I am wondering if the R programmig experts could help me out by comparing and contrasting the oop syntex in R with that of Java. For example, the basic class structure in Java is like this: public class Bicycle {

Hi all, the lists seems to be littered with disconnect problems using various equipment (TDM 400,Linksys etc etc.) My question is very simple and could make for good solution to Asterisk users. Since * can detect various tones according to different country standards would it be possible to disconnect on the 'off-hook' warning tone? This tone is: 1400 Hz, 2060 Hz, 2450 Hz, and 2600 Hz, at

Hi all. So.. as the problem with the video driver and CentOS 5 seems to be hard to solve, I'll try to migrate to CentOS 6. I'd like to ask if anybody is successfully running cadence and plugins on CentOS 6 and if it is running as well as it was on CentOS 5.. If any, what problems may I see running cadence on CentOS 6 ? Thank you very much! Robi

Hello list, Hope you all doing fine! I've tried to use the 'alias' directive in the indications.conf file but apparently it doesn't work.... It looks like maybe this feature was removed, because old sample for the indications.conf file have example using the alias parameter, but newer samples don't have it anymore.... also I couldn't find any ticket saying this parameter

The FXO lines on my TDM400 are connected to PSTN lines in Israel. As far as I know, the lines around here have disconnect supervision (I've seen some other Israelis on this list, anyone know for sure?), because it's worked on Dialogic cards, which reported hangup, not busy detect (while when I connect a Dialogic card to a PBX, I have to measure the busy signal's frequency/cadence or

>Another option is Aastra's Ring Selectors. They can "split" a line into >multiple lines by ring cadence. > >http://www.aastra.com/Products/RingSelectors/index.html Don't you then have to wait 4 rings b4 an extension will get a * dial ? This devices must wait 2 rings to detect the cadence then * is gonna wait 2 rings trying to get CallerID which I think it will NEVER

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

I have a line from BT (UK) connected to my asterisk system, on a TDM400P. I am able to see either distinctive ring cadences or caller ID but not both. If I try to enable both, all drings show up as 0,0,0. This is a pain because, if I make a call out over that line and the number I call is busy, I can elect to camp on it (ringback), which results in a different cadence of ring when the called

Hi Guys, I am getting a complain that call on analogue lines (Sangoam A400D) drops all of a sudden. Here is what I see in logs: [Jul 28 15:49:08] DEBUG[21438] dsp.c: ast_dsp_busydetect detected busy, avgtone: 75, avgsilence 135 [Jul 28 15:49:08] VERBOSE[21438] logger.c: -- Executing [h at macro-dialout-trunk:1] Macro("SIP/2111-b6a400b0", "hangupcall|") in new stack [Jul

Hi Can anyone with distinctive ring on their 7960's possibly post how they've got it to work? I understand that the ALERT_INFO variable is involved but using the examples for the variable value from the WiKi I'm just getting an error message from the Asterisk concole. Thanks in advance. P

I have a bit of a weird problem that I'm having great trouble debugging. I have a TDM400P PCI card with two FXO and two FXS modules. Both FXO modules are connected to BT lines here in the UK. Both BT lines have V23 Caller-ID, which works fine with Asterisk. Both asterisk and zaptel are fresh from CVS. Both FXO modules (channels 3 and 4) are in "group 1" for outgoing calls. My

Hello All, I am looking for a way to do priority call ringing. That is when a caller places a call to another party, they can indicate that the call is a priority and get a different ring to occur (ring cadence) on the called parties phone. This would be synonymous to an intercom ring on a key system. After some investigation, I have come across the ability of the GS BT101 which will ring

Hi all, I have been looking at the code for both the zaptel driver (wctdm.c/wcfxs.c) and the asterisk channel driver (chan_zap.c) trying to figure out how much of this that has been implemented. So far I can see that the current stable 1.0.9.1 zaptel driver don't have the SETPOLARITY ioctl that would be required to properly signal the Swedish/Dutch CLIP, but the 1.2 beta1 has this

Hi all, Has anyone gotten custom ring tones to work using ALERT_INFO with the Cisco 7940 SIP phone? I've read the wiki, but just can't get this to work. I'm currently using the 7.2 SIP image. Thanks, Chris

As promised, in preparation for next week's SIG meeting, here's a kick-off discussion about the Virtualization SIG roadmap. I'm mainly tossing out ideas here -- see this is an invitation to discussion. Key things I think should be on the roadmap: * Release process - General cadence - Estimate of the next release (if any) * Specification of targets - Right now, mainly xen4centos

Hi Folks, I'm trying to interface * with a PBX, but seems that his ring cadence is somewhat different, and my T100 doesn't show any call coming in. I've tried to change zaptel to new values but still couldn't make it work. Is there any other place where I should be changing some parameter? Is there any tool to measure the cadence timing that this pbx is providing? Thanks!