similar to: How to ECT (explicit call transfer) ?

Hi, I added a Fritz!PCI card to my asterisk system which is running on fc2 !. I installed the avm modules (fcpci) and when i try an capiinit and a capiinfo then everything seems to be OK (you can see capiinfo and lsmod at the end of the text) !. I installed the asterisk chan_capi module and when i start asterisk and enter the command capi info on the command line i get back: *CLI> capi info

I use AVM fritz card A1, I have install with instruction of Voip-info.or, but it don' work. capiinfo Number of Controllers : 1 Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.101-02 (49.18) Serial Number: 1000001 BChannels: 2 Global Options: 0x00000039 internal controller supported DTMF supported Supplementary Services supported channel allocation

Hi, I'm trying to get Asterisk working with the AVM B1 card. I've tried every instruction set I can find, but to no avail. I think I'm getting mixed up as to what Zaptel/CAPI configuration to use. If someone is currently using one of these cards, would it be possible to mail me a few bits of the important config files? Sorry if I should have included something else too, but let me

Hi everyone, Hi, I am new to the ISDN world, today I received my new NT box from CS Telecom but unfortunately it doesn't work. I have installed all the drivers and when I issue a "capiinfo" I get: -------------------------------------------- Number of Controllers: 1 Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.101-02(49.18) Serial Number:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Ahoy I'm trying to setup Asterisk on debian etch (with the debian packages) with a "Fritz!Card PCI" ISDN card and chan_capi. Everything seems to be configured the right way (excerpts below), Asterisk seems to see the ISDN-card but if i try to place a test-call from the outside i don't see anything on the asterisk-console (set debug

Hi, I have done my best and tired of searching the net about the problem. If anybody could help would be a great favour. Description of Problem ------------------------ I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture manual. After installation dmesg

I have installed an Asterisk 1.4 on Suse93 using a FritzCard. Some calls are logged to the ISDN log, but Asterisk is not detecting incoming calls. I wonder whether some other device or process is preventing Asterisk from gaining access to the isdn line? Is there some way to ensure that only Asterisk can listening to the line, or get it to share the line with some other device, such as the fax

Hi I have done everything richard told to do ECT . below is my trace, anyone can help ? -- DAHDI/i1/09123278669-4 answered DAHDI/i1/88050048-3 -- Native bridging DAHDI/i1/88050048-3 and DAHDI/i1/09123278669-4 PRI Span: 1 Adding facility ie contents to send in FACILITY message: PRI Span: 1 ASN.1 dump PRI Span: 1 Context Specific/C [1 0x01] <A1> Len:11 <0B> PRI Span: 1

I have installed an Asterisk 1.4 on Suse93 using a FritzCard. Some calls are logged to the ISDN log, but Asterisk is not detecting incoming calls. I wonder whether some other device or process is preventing Asterisk from gaining access to the isdn line? Is there some way to ensure that only Asterisk can listening to the line, or get it to share the line with some other device, such as the fax

Hello everyone, I have Asterisk SVN-trunk-r7498 installed on a server (celeron 2.4 Ghz, 256MB) with a TDM40b a TDM04b and an avm fritz!card pci. I experience a problem with voicemail: my messages are good unless the incoming call comes from isdn, which means via the avm fritz!card. In this case (and in this case only) the message is disjointed and I can hear at most 1 second out of a 1 minute

I did the following: - chan_capi-0.3.5/Makefile: uncommented CFLAGS+=-DDEFLECT_ON_CIRCUITBUSY - recompile asterisk + chan_capi - added /etc/asterisk/capi.conf: deflect=0800123456 ; some 0800 test number - in etc/asterisk/extensions.conf under [tcom-in]: exten => 98765,1,capiCD(0800123456) - made both b channels busy by outcalling on both lines (ISND BRI) - called my msn (98765) by mobile

Hi! I'm here again with echo canceller problem... :-( I think I've done everything to enable echo canceller feature, but it still doesn't work... Can anybody tell me if there is some error or something missing in this configuration please? I'm using Eicon Diva Server 4Bri. http://www.eicon.com/worldwide/products/MediaGateways/disv4bri.htm?techspec=1&regID=4999 Card

Hello, AFAIK the feature CD (call deflection) is only possible on point-to-multipoint links, is this correct? I've heard about the feature "partial rerouting" which should do the same on point-to-point-links. Is this implemented in either bristuff or chan-capi(-cm)? Thanks in advance, Karsten

Hey Guys Im trying to forward a call with asterisk to a regular phone. Something like " I get a call on my regular phone, and he's trying to reach some buddy of mine.. then I tell him "wait a sec" and push "Flash" and get a other dialtone.. then I dial that other number then hangup the phone, so the one that called will be connected to where I dialed it to"...

Hi there, I just recently installed asterisk from cvs on SuSE 8.2 successfully. I was quite surprised since asterisk seems to be a quite complex and powerful application. I also installed chan_capi 0.3.5 and am using a Fritz!PCI card at an ISDN line (PtMP). I already got some basic extension schemes to work, e. g. the capi callback example from junghanns.net. One of my goals is to set up an

Hi guys, I've been looking on wiki, but i could find it only for chan_capi: http://www.voip-info.org/wiki/view/Asterisk+PBX+functions In the CAPI channel See Asterisk CAPI channels * Call Deflection (CD) (redirect without answering): Implemented by chan_capi How can i do it with my Softphone Xlite? Any one can help me? I want to redirect a call without answering it. Best regards,

Hi, since version 1.4.12 the libpri package supports ETSI Explicit Call Transfer feature: http://downloads.asterisk.org/pub/telephony/libpri/ChangeLog-1.4.12 Does anyone know, how to use this feature in the dialplan? I can not find any hints in the asterisk doc. Best regards, -Thorsten-

Hi chan_capi users, this thing is awesome, no delays like in modem_i4l! Plus, it got those nice ISDN features. Here's my question: Does my service provider (Deutsche Telekom) have to provide me with these Services (CD, ECT)? (the Readme in 0.2.5 says "does not relay on service CD") I know, that I don't have CFU,CFNR,CFBS (which I would have to order seperately). How likely

https://bugzilla.netfilter.org/show_bug.cgi?id=928 Summary: ECN: --ecn-tcp-ece and --ecn-ip-ect is not supported Product: nftables Version: unspecified Platform: x86_64 OS/Version: Debian GNU/Linux Status: NEW Severity: normal Priority: P5 Component: nft AssignedTo: pablo at netfilter.org

Hi, I'm new to asterisk and try to get it work with capi.so. When I try to start asterisk with "asterisk -vvvvc" I get the following errors. I couldn't find any hint on the net what may be wrong in my configs. Has anybody got a hint? Here is the error output: [capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Jun 23