similar to: Which PRI card for EuroISDN ?

Hi, I'm currently deciding on what card to pruchase for octo/quad BRI card to use with Asterisk on EuroISDN lines. I'm aware of at least two options (Junghanns or Beronet), but don't know how stable and well supported they are. Which ones are better supported ? Any experiences? Any advice ? How tos ? What would you buy ? Thanks in advance, Regards, Rob.

Hi, I'm pulling my hair down and getting bold :-) ..... I have Asterisk between Panasonic KXTD816 and Euroisdn in Italy (beronet octobri and bristuff Asterisk).... I'm trying to do just plain transfer of call from pbx to ISDN through Asterisk... It seems like PBX hangsup, when call is progressing with no apparent reason. I'd kindly ask for any advice or some working example for

Hi, I'm trying to connect quadbri between powered ISDN phone and ISDN line: ISDN <---1---> TE - * - NT <--2--> Phone I use quadbri, suse 9.2 and latest 0.2.0-RC7k bristuff. I've used sample settings provided with package, but do get strange error (I think that I have wrong setting for P2P or P2MP setting and cables 1 and 2). If I connect phone to ISDN with straight cable

Hi, I'm pulling my hair out, cause cannot connect to EuroISDN BRI in Italy with octobri card from Beronet. I use bristuff and have following zaptel.conf... # # This file is parsed by the Zaptel Configurator, ztcfg # # # First come the span definitions, in the format # span=<span num>,<timing>,<line build out (LBO)>,<framing>,<coding>[,yellow] # # The timing

Hello, Configuration: Asterisk CVS HEAD 20050730 on RH EL3+ DIGIUM TE110P PRI card + euroISDN E1 I am trying to sort out the problem: 1. Provider's switch sends "SETUP"; 2. Asterisk receives "SETUP", rings allocated extension but does not send "Setup acknowledge" (or any other messages) to switch; 3. After 4 seconds of waiting of *'s response switch sends

> Date: Thu, 23 Jun 2005 08:50:50 +0200 > From: "Robert Rozman" <rozman@fri.uni-lj.si> > Subject: [Asterisk-Users] Loosing hair on connecting Panasonic PBX- * > - Euroisdn Italy > > I'm pulling my hair down and getting bold :-) ..... I have Asterisk between > Panasonic KXTD816 and Euroisdn in Italy (beronet octobri and bristuff > Asterisk).... Plenty of

Hi, I have a problem with setting outgoing caller id to "nothing" (secret) on our Wildcard TE405P connected to a swedish euroisdn line. Caller ID seems to work fine when connecting the same line to a Ericsson PBX - so something must be wrong in my settings, but I don't know what. I've tried: exten => _*70X.,1,Set(CALLERID(name)="") exten =>

Hi, I'm trying to set up an Asterisk pbx based on a Fedora Core 1 Linux box (customized kernel version 2.4.24). I want calls from my SIP soft-phones to simply be dumped onto the PSTN line via a BRI (EuroISDN). I have a cheap HFC-S based PCI ISDN card connected to the NT1+ interface, so I need zaphfc. I've read everything I've found at www.voip-info.org, then I've downloaded the

Hi, thank you for last info. we've tried to use te110p but failed. We're quite surprised that cable wasn't included with the card as any documentation, at least on HW setup and installation, yet cable pinout for connection to PRI interfaces.... 1. We have followed instructions on your site and from Beronet guide, but card just keeps blinking and nothing happens (also no useful

Hi all, My problem boils down to these errors: ... Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion) == Everyone is busy/congested at this time This is triggered by lines in extentions.conf such as: exten => _X.,1,Dial(ZAP/g1/${EXTEN},,W) The system is CentOS v5.2 with Asterisk 1.4.23 (druid-asterisk-1.4.23.1-2), a Sangoma A104

Hi, I'm experiencing difficulties to get a B410P running with Asterisk 10.3.1 and DAHDI 2.6.1. Am I supposed to use DAHDI for this card and ISDN BRI for my country (Belgium)? thx, BC

Hi, I'd kindly ask for any advices, experiences and opinions on what Primary (and also several BRI) cards should be used on EuroISDN and Asterisk ? I'm also curious what features do these cards offer regarding echo cancellation (mostly when calling from analog lines) ? Thanks in advance, regards, Rob.

Hi, I'd like to terminate IAX call on PRI interface. What conditions should be met to be able to send arbitrary caller numbers to called party, so he can call back to supplied ISDN number (that is different for every IAX user) - not through PRI interface, but plain ISDN call !! Thanks in advance, regards, Rob.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello! After LOTS of research on this list and internet in general I managed to get an old Teles PCI card working with Asterisk throught ISDN4Linux. No echos, no delays, simply perfect -- electronic poetry ! :) eheheheheh I just didn't get it to work with CAPI and "chan_capi" but, since isdn4linux is doing such a good job, I'll

please can someone send to me his files like zaptel & zapta if he si using TE110P thank you

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 This is slowly driving me nuts! I have several Cisco 7960s with SIP 8.2/7.5 fw connecting to Asterisk 1.2.5 driving a TE110P on a BT EuroISDN PRI line. On all outgoing calls I get a double ring tone (UK style + US style). I also have a DECT phone on a Sipura SPA-3000 configured with UK tones. This gives me a double ring of UK + UK, so this

Hi, I wonder if anyone is using Digium's TE110P card on an E1 connection. I have been try to, but so far it wasn't much of a success. It only works more or less in EuroISDN as PRI CPE. And even that config gives me some trouble with channel negotiation. My current config: *zaptel.conf:* span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=be defaultzone=be *zapata.conf:* [trunkgroups]

Hi, I have an asterisk installation with 2 E1 cards Software version is Asterisk 1.2.6 Libpri 1.2.2 Zaptel 1.2.5 I'm having problem with fax transmission, let me explain better my setup: My fist TE110P E1 card is connected to the telco line the second TE110P E1 one to an Nexspan PBX so the server is basically sitting between the line, and the pbx. every call coming from the line is

Dear users. My current setup uses a euroISDN E1 with 8 cahnnels for incoming and outgoing calls from a digium te110p. Currently all phones use SIP. However, I need to add some faxes lines and some POS credit card machines. These will require POTS lines with a fixed DDI. I have purchased the tdm400p and 4 FXS modules. My problem is with the zaptel.conf and zapata.conf. I am a little confused as

We are in the process of installing a PRI line and we are going to connect it to an Asterisk Box. Verizon called us today to find out some information. I am surprised that they have never heard of Asterisk or Digium. But anyways, they needed some information in order to set up the circuit. Does the TE110P support NI1 or NI2? (I think the answer is both) What is the number of digits