similar to: VAD (Silence suppresion problem)

Hello, I am new to this list and to asterisk and going through the archive file I did not find an answer to my problem. I have a VoIP network working fine with multiple gateways registered to a Cisco H.323 Gatekeeper. I have successfully registered Asterisk as a GW in that network and also successfully registered two X-Lite SIP Client to asterisk that call to each other. I want to connect to

Dear Mailinglist-User currently we`re working with an IP-PBX, based on Asterisk, with SIP, H.323 and ISDN-Capabilities. SIP and ISDN works fine, but H.323 not. In our first test, we started to connect Asterisk to an Cisco IOS-Gatekeeper with the "chan_oh323" (version 0.6.5). We successfully tested in/egress calls without any problems. But when we started to connect our Asterisk

I've complied the OH323 .so successfully and can easily receive calls from my H323 gatekeeper (using 711u), however it seems that all outgoing calls are refused and I'm getting "reason 23 (Temporary failure)" as an error code which I can't find documented everywhere. My H323 gatekeeper needs a 001NXXNXXXXXX to dial out to the PSTN even if I'm in north america (Montreal)

According to the wiki at voip-info.org, the dial structure for using oh323 without a gatekeeper is: OH323/<exten>@<host>:<port> or OH323/<exten> The second option is valid only in the case where a gatekeeper is used. NOTE: OpenH323 library v1.12.0 has a bug in the parsing of the destination host. When this version is used then the above syntax should be:

Hi, I am using the Grandstream HandyTone 486 as a SIP Adapter with a regular phone. Asterisk configuration is listed below. When I attempt to place a H.323 call, I receive the following errors: - Executing Dial("SIP/2000-3029", "OH323/##########@xxx.xxx.xxx.xx:1720|20") in new stack Aug 13 09:13:03 WARNING[20497]: channel.c:1806 ast_request: No translator path exists

For the benefit of everyone, having H323 Configuration problem due to H245 Tunnel, check the h323 Config embeded at the end. Comment the offending line as under: ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=yes ; -----Original Message----- From: Tola Ogunsan [mailto:tolaniye@hotmail.com] Sent: Wednesday, May 25, 2005 1:03 PM To: Kanuri, Seshu (Company IT) Subject: RE: oh323 problems

Hi, I am working on a H.323 project which involves GnuGk and Asterisk My current goal is to provide IVR functionality for the H.323 users which register through GnuGk(eg. call credit information) I have successfully built a H.323 platform using GnuGk - it uses SQL accounting and authorisation. Now I am trying to integrate it with Asterisk in order to provide IVR functionality as I already

Hi there ! I searched the whole web to find some helping information about H323 Control Protocol, but there is no way to find that information. We compiled and installed asterisk_0.9.0 + pwlib 1.5.2 + openh323_1.12.2 + 'asterisk-oh323_1.5 channel driver + wrapper' and configured the dialplan for using our H323 Endpoints which are ip200 Innovaphones. Besides, we also use Gnomemeeting but

Hi group! Does DTMF inband work with oh323 channel driver ver. 0.6.7? If yes, how to enable it, make it work? I have tried with "inBandDTMF=yes" in general context of oh323.conf, but I get this message when I * is starting. [chan_oh323.so] => (InAccess Networks OpenH323 Channel Driver) == Parsing '/etc/asterisk/rtp.conf': Found == Parsing

Jesus, Unfortunately, FFT and magic algorithms don't work (yet?). You might want to try this if you're not satisfied with Speex VAD: http://lists.xiph.org/pipermail/speex-dev/2008-August/006860.html It won't perform any miracles, but I think it works pretty well and is easy to tweak. Tom >---- Original Message ---- >From: jmorion at toomeeting.com >To: speex-dev at

Hello. I'm try to set up asterisk for making outgoing calls with oh323 channel driver version 0.7.1 with Asterisk CVS-1-01/09/05-01:41:37. Our provider uses Mera MVTS softswitch and supports only H.323. We don't use gatekeeper for connection but provider requires SOURCE PHONE NUMBER for route out calls and I don't know how I can specify this number. Call with this string exten

Hello all, It's me again. I would like play with calls between a H.323 client and a SIP client through * inside my LAN. For that, on host 192.168.1.20, I use GnomeMeeting (GM20) and Asterisk; on host 192.168.1.25, I use SJphone (SJ25) as SIP client on Windows and I register into * with a username, no password. The 3 files oh323.conf, sip.conf, extensions.conf are in attachment. In the same

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

Hi, I get this error when trying to dial an outbound extension from a sip phone: -- snip -- -- Executing Dial("SIP/2003-02d1", "OH323/3215435249@h323gk|20") in new stack -- H.323 call to 3215435249@h323gk with codec ALAW -- Called 3215435249@h323gk 0:33.283 H225 Caller:8143908 PWLib Assertion fail: Null pointer reference, file

I'm trying to connect an asterisk server via oh323 to a Lucent iMerge. I patched the code due so that Lucent can handle asterisk's ver4 h323 http://www.voip-info.org/wiki-Asterisk+Lucent+iMerge+Configuration I can now successfully dial in to our company over multiple lines. The issue is when I dial out The first outgoing call connects to an outside user A The second call drops the first

Hi there ! I searched the whole web to find some helping information about H323 Control Protocol, but there is no way to find that information. We compiled and installed asterisk_0.9.0 + pwlib 1.5.2 + openh323_1.12.2 + 'asterisk-oh323_1.5 channel driver + wrapper' and configured the dialplan for using our H323 Endpoints which are ip200 Innovaphones. Besides, we also use Gnomemeeting but

I am using asterisk-oh323-0.7.2-pre and CVS Head of Asterisk. Oh323 Module compiled without errors. But When I try to stary Asterisk with the Oh323.so file in the modules folder, Asterisk is dying with the following error. [chan_oh323.so]Aug 2 14:08:14 NOTICE[18873]: res_musiconhold.c:490 monmp3thread: Request to schedule in the past?!?! => (InAccess Networks OpenH323 Channel Driver) ==

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

Hello, in my project im using speex 1.2rc1 and the preprocessor VAD seems to only separate complete silence from not complete silence frames. The Speex Manual, you can read "The voice activity detector (VAD) provided by the preprocessor is more advanced than the one directly provided in the codec." but if you go to the source code in preprocess.c line 995 "/* FIXME: This VAD

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912