similar to: Dialplan + Registrar DB

OK, last showstopper that I just can't puzzle my way through - parking calls with the snom phones. I get the two phones connected, I hit transfer on one, the other phone goes to MOH and the first phone gives me DT, so I dial 700 and hit the OK button. Call transferred, the SNOM hangs up before I have a chance to hear which extension it parked to. Is there a way to make the SNOM phones

I am having problems transferring calls from one sip extension to another - the extensions use various phones hardware/software. From what I can tell I should just be able to press # and then dial an extension to blind xfer a call right? How do I do attended xfer? Either the phones (for this test I have tried xlite and budgetone102) are not sending DTMF correctly or something else is amiss...

Hi! A few months ago I needed some help for the following issue: .) a call comes in .) Person A takes the call and does an attended transfer to Person B .) Person A hangs up the phone without waiting for Person B taking the call .) the caller get lost at this point !! At this point the attended transfer should go into a blind transfer. The phone of Person B should still be ringing and the

Hello all, I have a system running AsteriskNOW with asterisk asterisk-1.8.8.1-1_centos5 from AsteriskNOW repository. I just changed our Polycom 335 sip.conf so that blindpreferred=1 (all transfers default as blind transfers). If a customer calls in & we answer & transfer, everything works fine. But if we call out to a customer & then transfer to another internal extension, that

HI ALL; Anybody can explain the difference between "call parking " vs "call transfer" Regards mohammad -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040720/2975991b/attachment.htm

Hello, we got a SNOM 360 here and this gota TRANSFER button. With this i can transfer a call from my phone another one. But when i push this Button and transfer the call to another phone, i get kicked out. Now, every secretary first asks the chief if he is available or not - how can i implement this feature thx for any ideas !

Hi I was wondering if there are any special settings that I need to be able to transfer calls. Whenever I press the 'recall' button, I just here a click, and no ring-tone to transfer. in my debug log I get this : -------------------------- Feb 24 09:09:27 DEBUG[19216]: Exception on 10, channel 1 Feb 24 09:09:27 DEBUG[19216]: Got event Pulse Start(14) on channel 1 (index 0) Feb 24

I have a customer who wants their receptionist to input the users' long distance PINs for the because they use each others pins. I am having trouble coming up with a way to do this because of creating a channel between the user and receptionist, dropping the channel and its variables and creating a new one for the actual long distance call. Any advice is really needed. 1. User Dials Long

Hello list, I have a problem with called ZAP channels making an attended-transfer or blind-xfer. Signalling at the phones is ok, but the CDR of Asterisk is wrong. At the moment there is a bristuffed Asterisk 1.2.18 running with bristuff-0.3.0-PRE-1y-g. Here is my dialplan, I simplified it a bit: [default] exten => 0123456789,1,Macro(dialpstn,${EXTEN}) [macro-dialpstn] exten =>

Hi all I am having problems with atxfer if I do the extact same thing with blind xfer it works fine when I hit press #2 (defined in conf for atxfer) i get "transfer" I dial the number I want and i get the following on the console -- Playing 'pbx-transfer' (language 'en') -- Executing Dial("Local/18005558355@jesnjer-f97a,2", "/18005558355")

Hello: We have a TDM2433E Digium Card (12 FXS, 12 FXO) and Asterisk 1.8.7.0 running. Everything seems to be ok but call transfers. This is the issue: *A, B, C and D are in FXS ports*. 1) A calls B. B anwers. 2) B tries to transfer the call to C dialing *2 (code for attended transfer). 3) A hears MOH. B dials number C. 4) Asterisk says the dialed number is incorrect or non existing. We tried

Hi I have setup forwarding - xfering - where you press # and then the extension. I add t to the dial cmd. My problem is that when you call something like internet banking they want #, but when # is pressed asterisk gets it instead. is there a way around this ? I haven't been able to get asterisk to listen to flash either Alex -- Why is it there are so many more horses' asses than

I just copied a file system using xfsdump|xfsrestore At least 1 new directory had been created on the source during the xfer (took 9+hours -- 7TB), so I wanted to verify I hadn't missed anything. Using rsync: > rsync --version rsync version 3.1.0 protocol version 31 Capabilities: 64-bit files, 64-bit inums, 64-bit timestamps, 64-bit long ints, socketpairs, hardlinks,

Hi Steve, > .. I'll try to sort all this out, and then I'll attack this > problem. Hopefully, I get it all into svn before the next release of > 1.4...! Just wondering if any new CDR functionality made it into the 1.4.16.2 release? I have looked through the ChangeLog for the 1.4.15 and 1.4.16.2 releases but didn't spot anything to do with changes in CDR handling. I for one

Hi, I've looked through the archives and seen references to placing calls on hold on a snom 200 (any version of the firmware but we have the latest: 2.05e.) Basically, we can't place calls on hold on the snom 200! The manual talks about the Flash button (which is really the "R" button, as far as I can tell.) Pressing the R button will immediately disconnect the incoming call.

Until now, we were tied to Amen (which delegates to Network Solutions), which was not an optimal choice. As of today, I've moved to Gandi, another French registrar, which is a kind of good citizen out there: http://www.gandi.net/whowe/ http://www.gandi.net/supports/ While I've done everything to avoid a disruption during the transfer period, we might still face some issues. If you notice

I'm using the latest SIP firmware from Avaya. The phone receives the 46xxsettings.txt OK, and then after entering extension and password it goes to the home screen saying 'Registering'. When I check options->ViewIPSettings->IPAddresses on the phone, the registrar and SIP Proxy fields are blank. I have both lines: SET SIPREGISTRAR "67.1XX.XX.XX" and SET

Hello, I'm having trouble figuring out how to setup Asterisk so that it's only a registrar - not passing any RTP data during phone calls. So far I got this far: Asterisk server holds registration information for phones Phones register with Asterisk giving it their ip+port where they can be currently contacted NAT doesn't seem to be a problem because STUN seems to take care

Hi everybody,

Hi, We switched from compiling LLVM with gcc to clang (3.3) and it appears that clang (correctly I think) optimizes away the GDBRegistrar's __jit_debug_register_code() function that's used to trigger reading debug info from JIT-ted code, breaking GDB support. This patch forces it to leave the call using the method described here in the 'noinline' section: