similar to: Making ZAP Trunk groups

Hello All, I installed Asterisk@Home .5 last night. I was able to configure some extensions for the house and they work fine. I just can't make inbound and/or outbound calls. The Flash Operator Panel shows four external icons and my new extensions. I have four X100P and two Broadvoice sip accounts. Thanks, David -- David Shaw <asterisk@ke6upi.com>

Ok, I thought the point of asterisk@home was that it automatically detected the X100P board and configured it correctly. Is this incorrect? You still need to modify /etc/zaptel files? And not just using the AMP configurator. There is no mention of this on the Asterisk@home webpage. Can anyone who has actually used ast6erisk@home confirm this one way or the other? Thanks, Dean

Hello All, I have one X100P card for inbound calls. I use two Broadvoice SIP accounts for all my outbound calls. I'm unable to place calls using BV. Inbound BV calls are ok. Verbosity is at least 3 -- Executing Macro("SIP/201-365c", "dialout-default|XXXXXXX") in new stack -- Executing GotoIf("SIP/201-365c", "1?4") in new stack -- Goto

Actually, I love my install of AAH 0.6. When something is not available in AMP I just dive into the configs and correct it. Most of the little things ARE available in AMP though so those times are few... W -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of David Sent: Monday, March 21, 2005 9:03 PM To:

don't quote me on this but I believe the earlier assumtion is correction. I think you need to have RTP going bothways otherwise the call will disconnect. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Chris Shaw Sent: Friday, August 13, 2004 12:40 PM To: asterisk-users@lists.digium.com Subject: Re:

I have configured asterisk with the AMP php configuration utility. I am able to make outgoing calls through broadvoice but incoming calls are sent to BV's Voicemail and never actually enter the IVR. When I show sip debug info through the asterisk prompt it actually reads the incoming call from BV but then issues a busy signal sending the call to BV's voicemail. I also modified

I'm using Asterisk 1.0.4 with AMP and Broad Voice. I have that with only 5 XTen Lite phones. I'm able to call / etc with internal phones just fine. I can call outside Vonage Numbers, and other BroadVoice Numbers. I have vonage where I live (626) and can call that fine. However, other 626 numbers I get similar errors as below. However, everytime, I try to call cell phones, and or

Hello, I'm trying to patch Asterisk for uses wth BroadVoice. I'm running Asterisk@Home. Here is the Error: [root@pbx1 asterisk]# patch < broadvoicesip2.txt can't find file to patch at input line 8 Perhaps you should have used the -p or --strip option? The text leading up to this was: -------------------------- |Index: channels/chan_sip.c

Okay, I just spent some time getting this done for a project. I documented the steps performed. Thanks to all of those who provided input. As time goes on, and people always have different settings, this may or may NOT work for you. ------------------------------------------------- Asterisk @ Home 0.4 HowTo William Pool (Puddle) 01-28-05 Description: Getting Asterisk @ Home to work with a

Hello All, I have 4 X100P cards. I was hoping to have card (line) go to separate ext. i.e. Card 1 (XXX)555-0001 My Ext Card 2 (XXX)555-0002 Wife's Ext Card 3 (XXX)555-0003 Fax Ext Card 4 (XXX)555-0004 My and Wife Ext. This is what I have now and all incoming line rings this one extension. exten => s,1,Dial(SIP/300,10) So what is "s" . Thanks, David -- This message has been

I have tried everything to get BV working outbound. All worked fine until the BV change last week. I called BV and they changed me to sip gen with a new password. I stripped my Asterisk server to one phone on Zap/1 until I get this working. The same BV account works fine with a SPA-3000 so I don't suspect a firewall problem. Symptoms: Asterisk registers with BV Ok Incoming calls work

I have been going crazy with this also since Sat. Our server was working perfectly with BV but will now not place calls to BV. Incoming from BV works fine. I felt sad rebooting it today, it had been running for almost 200 days! Here is my error message from the console... Notice I am running today's CVS Connected to Asterisk CVS-03/08/05-14:32:39 currently running on com (pid = 1624)

I'm still not getting my outbound to work. I've seen two patches relevant to broadvoice for chan_sip.c which apparently have already been added to CVS. I'm dropping all outgoing calls after ~30 secs. Asterisk doesn't seem to know they're gone though. I called my cell w/ broadvoice and turned on sip debug AFTer the call had physically dropped: *CLI> sip show registry

Yes - the problem was a missing signalling line in zapata.conf. Now in and out work. Also, it was news that "reload" from the console doesn't reflect changes made in zaptel and zapata.conf entries. Any other config files that it doesn't reload? >From: "Asterisk@Home" <asteriskathome@yahoo.com> > >Did you go into AMP and configure some place for

I finally got my incoming and outgoing to work on Broadvoice with a configuration file that is no where close to the one given by them. Here it Is (sip.conf). For others who have a working config could u please share so that I could compare. Thank You [broadvoice] type=friend username=[number] fromuser=[number] secret=[password] host=sip.broadvoice.com fromdomain=sip.broadvoice.com

I'd be grateful if someone could point me in the right direction. I have a Broadvoice trunk attached to Asterisk which I use for frequent calls to the UK using the following in extensions.conf exten => _0[1-68].,1,Ringing exten => _0[1-68].,2,Dial(SIP/BV/01144${EXTEN:1}) exten => _0[1-68].,3,Hangup The caller hears immediate ringing, though it seems that Broadvoice

Hello All, Yep I'm a newbe. I'm just started to play with asterisk. What I have Redhat Fedora Core 2 (New install) 3 X100P cards. I installed zaptel-1.0.3 libpri-1.0.3 asterisk-1.0.3 Where should I start?? -- Thanks, David -- This message has been scanned for viruses and dangerous content by KE6UPI, and is believed to be clean. KE6UPI thanks MailScanner for their support. Please

Look at the thread Optimum online-upload throttling confirmed. It seems like throttling is done by all Cable companies and that might affect the VoIP performance, specially for uploading. Try when the activity in the cable line is low (i.e. late) and see if it gets better, or try sending all the data through your DSL line. Carlos > > Message: 26 > Date: Fri, 19 Aug 2005 15:58:59 -0400

Hello All, I loaded Asterisk@Home. I have one X100P card. I try to dail out but get rejected. Any help... Thanks, David -- This message has been scanned for viruses and dangerous content by KE6UPI, and is believed to be clean. KE6UPI thanks MailScanner for their support. Please contact support@ke6upi.com if you have questions about this email.

HELP! Ok, so I have the following SIP.CONF: [general] context=default port=5060 bindaddr=10.1.1.200 externip = XX.XXX.XX.XX localnet=10.0.0.0/255.0.0.0 disallow=all allow=ulaw allow=g729 allow=g726 allow=alaw register => ##########@sip.broadvoice.com:XXXXXXXXX:##########@sip.broadvoice.com/1234 [sip.broadvoice.com] type=peer host=sip.broadvoice.com fromdomain=sip.broadvoice.com