similar to: ztdummy on Gentoo 2.6.10 Box

Hey Everyone, I downloaded and installed the X-Lite softphone the other day (the lite version) and cannot seem to get it to work well. Don't get me wrong, it registers with my asterisk server and everything seems to work well, except the call quality really is horrible. I thought it may be the place I was trying it at (DSL) so I took it to the office and tried it right next to the asterisk

Have Asterisk us at running fine, but have run into a small snag. It's not emailing the voicemails to the users. I have attach=yes set, sendmail is configured and works from from the commandline (sent an email to myself). Unless I'm wrong, or missing something, asterisk is configured by default to send an email when a users receives a voicemail, correct? Thanx A

Hi Everyone - I have webvmail up and running, I can see the messages, forward them, pretty much everything but listen to them. Here is what I see in my logs: 192.168.0.1 - - [25/Feb/2005:08:15:40 -0800] "GET /vmail/vmail.cgi?action=audio&folder=INBOX&mailbox=2377&context=default &password=000012&msgid=0000&format=gsm&dontcasheme=4624.gsm HTTP/1.1" 200 9438

Hey Everyone, I am using NuFone for 866 inbound service and I am trying to figure out the callerid part of it. Any call into my * system just shows "Toll Free Call" and will not give me the calling party's caller ID info. Is this just something I have to live with using NuFOne, or did I miss some type of config in * that will grab the callerID other than the inbound 866 number...?

>how does the phone know where to find the TFTP server..? Dude, option 150 in your DHCP server: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186 a00800942f4.shtml We use the same option for our Mitel phones. HTH.

Guys. Anybody has developed and asterisk brochure for commercial purposes (consultant, etc) that I might be able to take a look at?

Our main asterisk box peers with that of a customer. We are trying to assign DID's to their extensions but get this error. What are we doing wrong? Client side Mar 25 18:49:47 NOTICE[1369]: chan_iax2.c:6545 socket_read: Rejected connect attempt from 203.xxx.xxx.16, who was trying to reach 's@' Our side Mar 25 18:56:15 WARNING[705]: chan_iax2.c:5546 socket_read: Call rejected by

How do I route all the outgoing calls through a SIP gateway, this should send more than one outgoing call to the sip gateway at once. please show me the sample configurations on how to do this. my SIP gatway can accecpt direct IP traffic or SIP proxy traffc. Thank You Kanishka -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have a [start] context that all my inbound and '0' calls are routed into. Because of the way I want to set my system up, I want to prompt the user to enter a 1 if they know the extension, or a 2 for a directory and nothing else. It works, however there is a 5 to 10 second delay after enter the 1 or 2 before the system responds. I have read over the wiki on how asterisk handles digit

I have let's say a reception that is comprised of 2 zap extensions and a mobile phone to dial using ISDN through Capi. I want to have a delay before starting dialing the mobile phone so that it rings only when the call has been unanswered for say 25 seconds. I tried to use Capi/2106994444:ww6935555555 but without any success. There is any way to do it or the code has to be modified ? Thanks

For anyone playing around with IAXy(S100i) devices, I am making the following available: Windows IAXy Provision v1.00 This is a from-the-ground-up development of a means of provisioning IAXy devices using a Windows environment. For some users, being bound to Linux for IAXy provisioning is not viable or convenient in some cases. This application provides a GUI data entry for the various IAXy

I installed Asterisk on Gentoo using emerge. At first, emerge tried installing version 0.9 but reading the wiki showed how to get the latest stable. I'm running Gentoo kernel 2.6.11-gentoo-r9. Asterisk seems to be working just fine, but I'm concerned that since I don't have any Digium hardware, I may need a timer source. When I executed emerge zaptel, it installed zaptel 1.0.7

Hey Everyone, I am playing around with my * box, and I have a few different phones hanging off it it right now. I have a Cisco 7960 capable of g729, ulaw and alaw, I have a Cisco ATA186 with a Panasonic cordless phone attached to it, I have a Digum IAXy with a dumb analog phone attached to it, and I have a Linksys PAP2-NA with an AT&T 959 analog phone attached to it. I also have several

Hi Guys, Gals. Ok, so I have latest CVS sources on a debian box, 2.6.10-1-386 kernel kernel headers isntalled in the right plauce and all that stuff .. but whatever I try .. same results, I only need to get ztdummy working for a conference .. but I always end up stuffed :( heres the compile: robin@debian:~/zaptel$ make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE

Hi, I've install zaptel and I don't have a Digium card installed in the machine. So I want to install ztdummy to have Music On Hold working. I've follow these instruction http://www.voip-info.org/wiki-Asterisk+timer+ztdummy and at the point "modprobe ztdummy" it's failing. I'm getting these messages: root@dubic:~# modprobe ztdummy FATAL: Error inserting ztdummy

Hi all, Trying to build ztdummy on an old redhat 7.3 box running kernel 2.4.20-43.7.legacysmp. Yes, I have the kernel sources installed. Yes, I set them up with make oldconfig; make dep. The build error is: make ztdummy gcc -I/usr/src/linux-2.4/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB -I/usr/src/linux/drivers/net -Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/usr/src/

Hi Everyone - I just got my hands on a Cisco 7970 and was told that I should do a factory reset before trying to configure it to work with Asterisk. After the factory reset, it will not boot at all, instead sits with the line button lights flashing one at a time in sequence. I have had no luck trying to figure it out - anyone run into the same problem that can lend a hand..? Thanks

Hey Everyone - I was going to create a visio diagram outlining how my extensions will flow out. I was just wondering if anyone on the list may have an example they have already done up so I can get some ideas. Thanks ****************************************** Richard J. Sears Vice President American Internet Services

Hey Everyone, This is not an operational issue, and to my knowledge only effects the look of the command, but when I issue a "sip reload" then a "sip show peers" I see all of the actual usernames I have assigned in my sip.conf. However, five minutes later I reissue the sip show peers and all of the usernames have disappeared and are replaced by the sip ID. The only way to get

Good Day list, My head is pounding from google overload. Does anyone know if there is any way to park a call and specify the ("context", "Extension", and Priority) of where to call back to if the call times out and is parked too long? ParkAndAnnounce does this feature, however I do not like that it has to call you back to announce the location. I want my cake and eat it