similar to: Asterisk-H323

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

Hi, Someone released a succefull interconnection in H323 with WTL equipement ? I'm trying to do that with an IPNx. But get dead air. With chan_oh323 it's fine, all works. With chan_h323 => dead air. The configuration is GW to GW. This is my configuration from h323.conf: [general] port=1720 bindaddr=my.ipaddr dtmfmode=rfc2833

Hello everybody, when I upgraded from RC1 to RC2 I didn't had any audio between my ATA286 and H323 EP (my post from 13/08/04) I checked further and discover that problem is with ATA286 who is unable to call. I always get an 404 error. Coming back to RC1 everything works fine again. I tried to modify my dtmfmode from rfc2833 to info but in change nothing. Local call to asterisk are

Hello, I am just curious how many people are hooked up with BroadVoice and have recently been experiencing a lot of dificulty. Joel

Hello every one, I have got a H323 gatekeeper for testing. The informations are something like this: account code: test01 gk ip address:192.168.10.12 I don't know how to set it in the h323.conf or oh323.conf, I have tried it for almost one day but I always got the error. Help me please. Regards. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

Thanks for taking a look greg and hank. This seems to be getting bettre everyday..help please My sjphone is running on the same box as asterisk...i believe then the red hat firewall should not be a problem. Whenever i dial from CLI i get ######### Executing Goto("OSS/dsp", "default|s|1") in new stack -- Goto (default,s,1) -- Executing Wait("OSS/dsp",

Hello, I am moving topic from asterisk-dev list to asterisk-users list. Did anyone succeed receive incoming calls in h323 and orient them to right context based on "host" identification? To summarise, I have quintum Gateway sending call to Asterisk box, and I would like to use asterisk as a protocol converter h323 --> sip. in h323.conf, I have [quintum_gw1] type=user

Hi all, I am still confused about the way to use asterisk with QuickNet Phonejack. If I am not wrong, The phonejack card should be using the phone.conf as the asterisk channel. I was initially confused with the ZAP channel (The digium card), now that I have found out that Phonejack should use the Linux Telephony Devices and its configuration file is phone.conf, but the question is I do not know

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

My setup: X100P and Quicknet PhoneJack. I can't seem to properly set up a Zap channel for my X100P. Here are some of my configurations: [zaptel.conf] fxsks=1 #X100P fxoks=2 #Quicknet PhoneJack defaultzone=us loadzone=us [zapata.conf] [channels] context=local signalling=fxs_ks channel->1 ;X100P [extensions.conf] ... [local] exten=>_NXXNXXXXXX,1,Dial,Zap/1 ;I'm pretty sure the

Hi Friends, I am new to linux and new to asterisk. I need some help setting up asterisk in my linux box. Does anyone have a step by step guide ? On my PC i have installed a phonejack (from Quicknet) as well. Your help is appreciated.. I kind lost.. thanks, _________________________________________________________________ Expand your wine savvy — and get some great new recipes — at MSN Wine.

Hi, I have recently discovered the project along with the PhoneJacks produced by quicknet, they could be the answer to something I have been looking into. I would like to be able to test using a dial-in server & possibily also a Windows RAS server, however I only have 1 phone line. I was thinking that I create a setup like that illustrated below to solve the problem:- Ext 1000

Sorry, if this question has been asked before. I have redhat 9 and asterisk installed. I would like to know how can i make work the phonejack with asterisk.

Hello, We use and develop the astGUIclient suite. It is Open-source(as in GPL) and offers Inbound and Outbound call center functions with reports, ACD, monitoring, recording and very basic IVR scripts. Complex IVR functions need to be custom programmed within Asterisk but that is not really that hard. It works across multiple Asterisk servers and we are using it currently at 5 locations including

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

First, here's what I want to do / what I have: X100P and a Quicknet PhoneJack. I want to be able to pick up the analog phone (connected to the phonejack) and dial another computer (with the same hardware) or just make a regular phone call which will be decided by asterisk depending on the phone number dialed. I know that this won't be taking full advantage of asterisk, but I'm

Hello all, I'am trying to use 2 gnophones on my LAN. But I can't get any sound. Here is my configuration: 1. on PC1, I have: - Asterisk compiled from CVS (CVS-05/15/03) and it runs. - Gnophone binary version from Debian: 0.2.4+cvs.20020624-3 - a sound card working ( module es1371 for /dev/dsp) - I registered it as "alice" in extensions.conf 2. on PC2, I

Hi there, we are looking for an opensource or commercial * based Call Center. Full ACD, call monitoring, multiple queue, IVR, voicemail, management, reporting, CDR, etc is needed. over 100 seat can be the initial target and will grow in a very short time. SIP phones will be used and multiple E1 lines incoming, so to provide full failover a cluster of * machines or some other form of redundancy