similar to: Broadvoice international dialling question

I'm still not getting my outbound to work. I've seen two patches relevant to broadvoice for chan_sip.c which apparently have already been added to CVS. I'm dropping all outgoing calls after ~30 secs. Asterisk doesn't seem to know they're gone though. I called my cell w/ broadvoice and turned on sip debug AFTer the call had physically dropped: *CLI> sip show registry

Hi all, I just upgraded to Asterisk 1.4.18 a few days ago and I don't use Broadvoice TOO often, however I have a Vermont number with them and so my mother in law calls it to talk to my wife once in a while, so that's why it took me so long to notice it wasn't working. Anyway, when she calls she gets a busy signal (as I've tested when calling it from my cell). When I enable

Hello All, I have one X100P card for inbound calls. I use two Broadvoice SIP accounts for all my outbound calls. I'm unable to place calls using BV. Inbound BV calls are ok. Verbosity is at least 3 -- Executing Macro("SIP/201-365c", "dialout-default|XXXXXXX") in new stack -- Executing GotoIf("SIP/201-365c", "1?4") in new stack -- Goto

Hi, all. The asterisk setup is working fine, receiving calls via broadvoice "initially". ? When call comes in via broadvoice number, asterisk picks it up and routes correctly, as long as the call came in within ~2 min from the previous one. In other words, as long as a call comes in within ~2 min since the previous one, asterisk will answer the call. However, if the call comes in

I finally got my incoming and outgoing to work on Broadvoice with a configuration file that is no where close to the one given by them. Here it Is (sip.conf). For others who have a working config could u please share so that I could compare. Thank You [broadvoice] type=friend username=[number] fromuser=[number] secret=[password] host=sip.broadvoice.com fromdomain=sip.broadvoice.com

> > I've tried setting up my sip.conf in two ways: > > > ------------------------------------------------------ > register => [240xxxxxxx]:[my_password]@sip.broadvoice.com > > > [Broadvoice] > type=peer > username=[240xxxxxxx] > fromuser=[240xxxxxxx] > secret=[my_password] > host=sip.broadvoice.com > context=incoming >

--------------- Hi, I got hit with a funny one today; my configuration, which had been running fine for many weeks, suddenly stopped registering with Broadvoice's SIP. I switched among BV SIP hosts, verified my account was OK, even tried upgrading Asterisk. The weird thing was that I could associate OK with my WiFi SIP phone. So it looked like an Asterisk- specific SIP interoperability

I have been going crazy with this also since Sat. Our server was working perfectly with BV but will now not place calls to BV. Incoming from BV works fine. I felt sad rebooting it today, it had been running for almost 200 days! Here is my error message from the console... Notice I am running today's CVS Connected to Asterisk CVS-03/08/05-14:32:39 currently running on com (pid = 1624)

As a general rule of thumb it would be good to make the distinction between 'Credit Card' and 'Debit Card' too. If possible, never ever use a debit card for online purchases. It taps directly into your account and removes REAL money. Credit cards are 'virtual' money in that they are credit and your cash in account remains untouched. That way if your credit card account

Hello - I've been using Broadvoice with Asterisk for a couple of months with no issues. Today, it has stopped registering. The Sip Debug from CLI is below. It tries to register five times and then gives up. Any suggestions? As you might suspect, I have not been able to get Broadvoice on the phone and usually get cut off after being on hold about 5 minutes. Strategic portions of IP

HELP! Ok, so I have the following SIP.CONF: [general] context=default port=5060 bindaddr=10.1.1.200 externip = XX.XXX.XX.XX localnet=10.0.0.0/255.0.0.0 disallow=all allow=ulaw allow=g729 allow=g726 allow=alaw register => ##########@sip.broadvoice.com:XXXXXXXXX:##########@sip.broadvoice.com/1234 [sip.broadvoice.com] type=peer host=sip.broadvoice.com fromdomain=sip.broadvoice.com

*sigh* Ok, I have fought and fought with this. I have read all the FAQ's, I have scanned the list archives. I can receive calls on * from my Broadvoice acct, but I cannot place calls... I have the 'World Unlimited' plan, and like 5 area codes that are local to me in Dallas. Can anyone help me? here are my config files... - sip.conf - [general] context=default ;

Hello everyone, Well here is my initial posting to the list, and I will admit Asterisk is new to me. I just got everything running here a couple days ago, so still learning the ropes for sure. OK, here is my problem. Currently I have it setup talking to a couple Cisco IP phones, and some Xten softphones, this works great. I also got an account with FreeWorld Dialup using IAX2 and that

I'm at a loss as to why my * box dosnt want to play nicely with Broadvoice. Here is what my log files are showing: Jul 28 16:33:43 NOTICE[1187]: -- Registration for '2017540019@proxy.dca.broadvoice.com@proxy.dca.broadvoice.com' timed out, trying again Jul 28 16:33:43 DEBUG[1187]: Scheduled a registration timeout # 108 Jul 28 16:33:43 DEBUG[1187]: Stopping retransmission on

I'm experiencing a "Failed to authenticate on INVITE" error (see output below) whenever I try to MAKE a call through the Broadvoice account. I noticed some others had the same problem but it went away when they rebuilt Asteris w/ a new version. N such luck for me! I'd be grateful for any assitance. Here's what I've done so far: 1) I downloaded the latest stable

I just signed up and configured a SIP connection from BroadVoice. It works great. This issue I have is that it seems after a couple calls (or a certain amount of time) Asterisk doesn't seem to be receiving these calls anymore. It seems as if BroadVoice is not redirecting the call to my Asterisk. Asterisk still seems to be ready for the call: *CLI> sip show registry Host

I've setup Asterisk to work with Broadvoice for both incoming and outgoing calls. I can make outgoing calls, but when I try to receive an incoming call I see the following message on the console: [date] NOTICE[8661]: chan_sip.c:13178 handle_request_invite: Unable to create/find SIP channel for this INVITE It's registered with Broadvoice: Name/username Host Dyn

I have an idea, tell me if this wouldn't work... I know it's really ugly, but it might help some people until we can get round robin DNS checks for peers... Since * does not do GetHostByName() again until you reload your config, and BroadVoice and I'm sure other sip providers are using round robin DNS, why not create 2 [<your server here>-out] contexts in sip.conf, and then in

Hi, We've been using Broadvoice with * for several months, mostly successfully. However, sometime last weekend (Sat, Dec 4 - Mon, Dec 6), BV seems to have stopped passing DTMF on incoming calls. We've not made any changes to the * system during this time. We even switched to using their DC server instead of the usual LA server, with no effect on the problem. We have applied the

Hi, I have two accounts with broadvoice. Now, I want to be able to distinguish between them. I though that this would be simple by adding "/EXTEN" at the end of the register statement. For example: register => num1:pass@sip.broadvoice.com/1000 Unfortunately, this is not working. When I call into my box I hear busy tone. My config looks like this: [root@voip asterisk]# cat sip.conf