similar to: bristuff-0.2.0 RC7 and RC7a

Hi, it helps to have configured and working kernel sources installed. Configure your kernel sources for the running kernel and then run "make" in the kernel source dir to build the necessary scripts. You dont have to wait until the kernel is compiled. best regards Klaus -- Klaus-Peter Junghanns Am Samstag, den 25.06.2005, 02:45 +0200 schrieb Stefan Gofferje: > Hi folks, > >

Hi list! On a newly installed RHEL 4 box I'm trying to install bristuff-0.2.0-RC8n. Everything did compile but I am running into some problems with the zaphfc driver. First of all when I load zaphfc *before* zaptel (yes I know I shouldn't do that) I get a kernel panic and the box hangs. Not so nice, especially when you are trying to fix stuff from remote locations. But ok. Now for

Hello, I have about 10 Asterisk PBX in production with Bristuff-0.2.0-RC8q (asterisk 1.0.10) and I want to use Bristuff-0.3 now for the new PBX I am going to set up. With Bristuff-0.2.0-RC8q the ISDN lines are working fine, but the new version of Asterisk add some nice features. All these PBX are in France with France Telecom lines. When I use the new version after about an hour with

Hi, I had problems described in another thread so went from a start, but now have problems when loading qozap module. I get : # insmod qozap.ko ports=9 insmod: error inserting 'qozap.ko': -1 Unknown symbol in module and in /var/log/messages: module qozap unsupported by SUSE/Novell, tainting kernel. qozap: disagrees about version of symbol zt_receive qozap: Unknown symbol zt_receive

Hi, I have the SuSe9.2 installed in a box with a QuadBri. I have followed all the instructions i have found and this is my best result... only one error compiling zaptel :( .. y have the kernel sources an already made the links to its drwxr-xr-x 8 root root 328 Jun 16 20:20 . drwxr-xr-x 12 root root 320 Jun 16 14:05 .. drwxr-xr-x 3 root root 136 Jun 16 20:17 asterisk drwxr-xr-x 22 root

Hi All, How to install bristuff on asterisk 1.2.14? install scripts are trying to download and compile those versions: asterisk-1.0.10 zaptel-1.0.10 libpri-1.0.9 and I'm running: asterisk-1.2.14 zaptel-1.2.12 libpri-1.2.4 I only need Pickup application from bristuff to be able to pickup channel independent calls e.g. when I have incoming call from PSTN and I would like to answer

Hi list! I'm trying to install bristuff on a newly installed box. The box is running a rebuild of RedHat Enterprise linux with the latest kernel. The architecture of the box is x86_64 (Athlon 64), the os is 64 bit with 32 bit compat libs installed. Also the kernel source is installed as well as the (kernel) development tools. The bristuff install.sh script downloads asterisk+zaptel 1.0.2

Hi, I have following problems compiling bristuff-0.2.0RC8m. Has anybody seen them before and can point me in the right direction? zaphfc/make all: ---------------------- /usr/src/asterisk/bristuff-0.2.0-RC8m/zaphfc/zaphfc.c: In function 'hfc_findCards': /usr/src/asterisk/bristuff-0.2.0-RC8m/zaphfc/zaphfc.c:1000: error: invalid lvalue in assignment make[2]: *** [

After upgrading a CentOS 3.x box to CentOS 4.1 (both x86_64 with an Athlon64) I also wanted to get the latest bristuff. Unfortunately bristuff without florz causes the box to kernel panic within hours (console will complain about bad frame received something). It seems however that the florz patch will not work for x86_64 arch. Bristuff -0.2.0-RC8j compiles fine without the florz patch, but

I'm trying to take advice to use "zaprtc from bristuff" (from both a posting here and references on voip-info) because I have a 2.4 kernel SMP machine. I've downloaded and installed bristuff-0.2.0-RC3a and now have the modules zaphfc and zaptel loaded. Running meetme says the extension is invalid (I've double checked meetme.conf and extensions.conf). There is no zaprtc

Hi All, It's broken !! (drat) Asterisk if failing to load with the following error (taken from end of /var/log/asterisk/full) after adding bristuff. Can anyone help please? Jul 17 19:57:54 VERBOSE[2503]: == Registered channel type 'Phone' (Standard Linux Telephony API Driver) Jul 17 19:57:54 VERBOSE[2503]: [chan_zap.so]Jul 17 19:57:54 VERBOSE[2503]: [chan_zap.so] =>

I am following the guide here: http://updates.xorcom.com/astribank/bristuff/1.4/bristuff-current/INSTALL.html for installing bristuff on a CentOS5.11 box (stock 2.6.18-398.el5.i686). Whilst building zaptel I get the error as follows: CC [M] /usr/src/bristuff-0.4.0-RC4-xr7/zaptel-1.4.12.9.svn.r4649/kernel/xpp/card_bri.o In file included from

hello, I have a asterisk box (Slackware 9.1.0, Linux 2.4.31) connected to a Ericsson Businessphone PBX on the internal S0 bus with HFC-S card and zaphfc driver - point2point mode -. --------- | TELCO | | BRI | --------- | | PBX external S0 -------- | PBX | -------- | PBX internal P2P S0 NT Mode | | HFC-S Card P2P TE Mode

Could someone confirm, please, that this bug report and its proposed fix are being checked? 1. Is my analysis (message below) about right? 2. Is my proposed patch (attached) about right? 3. Is this being addressed for "rc8" (or whatever) and its successors? Many thanks. -- : David Lee I.T. Service : : Senior Systems Programmer

Trying to compile BRIstuff 0.2.0-RC8o. Ran the download.sh and compile.sh scripts to automate the process. gcc -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -g -Iinclude -I../include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DZAPTEL_OPTIMIZATIONS -DASTERISK_VERSION=\"1.0.9-BRIstuffed-0.2.0-RC8n\" -DINSTALL_PREFIX=\"\"

Hello, I am trying to install a Billion ISDN on Asterisk I have Debian Etch and I installed theese packages: apt-get install linux-headers-`uname -r` apt-get install make apt-get install ncurses-base ncurses-bin ncurses-term apt-get install libncurses5 libncurses5-dev apt-get install bison apt-get install openssl apt-get install libssl0.9.8 apt-get install libssl-dev apt-get install

Hi, I am just moving from Asterisk 1.2+bristuff up to 1.6.2, a huge leap :) I was wondering if someone could point me at 3 things that I appear to have "lost"? 1) ZapEC(off) - Is there an equivalent dialplan command to request no EC on a channel before dialling in DAHDI? 2) rxfax(file.tiff) - I have found ReceiveFax(), but I am aware that much has happened in the faxing stakes

Hi, Is the following behaviour a bug or a feature ? Using bristuff-0.4.0-RC3d.tar.gz, the call file thereafter produces : [Mar 16 15:39:36] WARNING[25547]: pbx_spool.c:267 apply_outgoing: At least one of app or extension (or keyword message/pdu) must be specified, along with tech and dest in file /var/spool/asterisk/outgoing/astup.call [Mar 16 15:39:36] WARNING[25547]: pbx_spool.c:457

I applied the florz patch but my problems remain. Now I get all sorts of weird errors on the console and I cannot make outgoing calls. Incoming calls work as expected. I am using a single HFC-S card with BRI. Any clue what these errors below are? Ri = 44651 TEI msg = 3 TEI = 7f Ri = 3800 TEI msg = 3 TEI = 7f Ri = 42399 TEI msg = 3 TEI = 7f Ri = 42409 TEI msg = 3 TEI = 7f Ri = 22078 TEI msg = 3

Tzafrir Cohen already mentioned it in a reply to someone else: There's a bristuff-users mailinglist now. If you are interested in bristuff or are using it consider subscribing to it. The webinterface is here: http://lists.three-dimensional.net/mailman/listinfo/bristuff-users The list address is: bristuff-users@lists.three-dimensional.net This mailserver is running greylisting, so you might