similar to: Detect hangup

Hello Eric, call progress detection is the problem. Asterisk mistakenly recognizes the call to be answered and then still "hears" the ringing that should not be there if the line was really up. To solve the problem you would have to either implement a progress detection matching your country's indication tones or at least adjust the existing one for US or Costa Rica in dsp.c. By

I want to subscribe myself to the mailing list. And I have a question. Where can i ask it?? I want to make Linux Fedora Core 2 my file server I already connected it to a Windows2000 Domain. But Now when users login they have to acces their own user folders. Without having to login again. So that they login on windows they can acces it directley. greet Dylan van Loenhout

Hi all. I've got an Auerswald 4410USB ( http://www.auerswald.de/int/products/c4410usb.htm ) which I connected to my 2nd ZAP interface (s0 <-> Zap) via Crossoverr ISDN cable (which I crimped myself, I guess that's not the source of my trouble). Now what is annoying however, there is a very loud and very distinct static noise that is audible to the external party (outside of my * box

Hallo all do any of you know if the toll free access to the Netherlands is still working via FWD or Iaxtel? thanks liaan --------------------------------- Do you Yahoo!? Yahoo! Search presents - Jib Jab's 'Second Term' -------------- next part -------------- An HTML attachment was scrubbed... URL:

hallo all could anyone tell me how to get the * to send keepalive packets over a registration "trunk" or how to increase the amount I'm having natting issues, (the machine is siting behind 2 nat firewalls) thanks liaan --------------------------------- Do you Yahoo!? Yahoo! Search presents - Jib Jab's 'Second Term' -------------- next part -------------- An HTML

FYI to anyone else who may be experiencing random hangups; I removed the busydetect=yes lines from the conf files on my asterisk servers, and haven't had a hangup since. I had done that once before and it didn't seem to have much of an effect, so I'm not breaking out the champagne yet. But so far over dozens of calls both made and received since I took that line out, I

Good day, anyone out there running an ISDN pbx behind an Asterisk server with an AVM active card? At this moment Asterisk is connected to the internal ISDN bus of the PBX, but I want to control the calls coming in from the outside, before sending them of to the PBX. Any BTDT is greatly appreciated. rgds pos

Hi, the attached patch IMHO improves the man page regarding use of the backslash as escape character in wildcard patterns. Thanks, Erik P.S. Please keep me in Cc: as I am not subscribed to the list. -- Premature optimization is the root of all evil. -- Donald Knuth -------------- next part -------------- A non-text attachment was scrubbed... Name:

I have a couple of X100P's in my system and while on calls they just randomly hang up for no reason. I have tried messing with the busydetect and callprogress setting them to yes and no same and still random hangups. Is there another setting I should be looking at? My zap config looks like. context = inbound-work include => extensions signalling

install asterisk with x100p clone; the problem is that call me and hangup but the interface zap not detect the hangup and the line open. the error is : The 'reload' command is deprecated and will be removed in a future release. Please use 'module reload' instead. -- Reloading module 'chan_zap.so' (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf':

Afternoon all, After doing some test on my asterisk box I can successfully receive calls to my Asterisk PBX to a SIP phone from The Telstra PSTN network Dial out from a sip phone is also not an issue, all calls connect and terminate normally. If I call the Asterisk PBX say from PSTN in Zap1-1 and out through ZAP2-2 back to the PSTN (after entering the correct pin off course) the card does not

Hello all, i'm experiencing a list of unpredictables hangup on SIP phones using a PRI E100P Card. All i can see in logs is " WARNING[81931]: File chan_zap.c, Line 5402 (zt_pri_error): PRI: Read on 37 failed: Unknown error 500" I receive a lot of these errors in asterisk/messages. It doesn't seem to be strictly linked to hangups, since i have dozen of these messages per

When a caller hangs up (e.g. after leaving a voicemail), my British Telecom exchange sends a continuous tone for about 15s and then silence. I can't get asterisk to recognise this tone as a hangup indication. I have tried indications.conf with both country=uk and country=us. My zapata.conf has busydetect=yes, callprogress=yes and I've tried setting busycount from 1 through 7 I am using

Hi ! I have some issues, i don't know exactly if it's a busy detection issue. When i dial into the Asterisk box, and if i hang up before the Asterisk answers with the IVR Welcome message, the Asterisk goes on with the call. But, if i wait for the Asterisk to answer, and if i hang up, the Asterisk hangs up too. I have this parameters on zapata.conf: busydetect=no

Hi, Does some one experience the Sangoma A20X-ec series card that cant detect the hangup tone? I got * server 1.2.5 and running on Centos 4.3, I hock up to two PSTN lines and each time some one call in and my phone delay 1-2 sec (this is Asterisk delay nothing to do with Sangoma) and it rings on my phone, however, end on the day I got not less that 10 empty messages. I found out that Sangoma FXO

So I made the mistake of buying a Carrier Access channel bank without noticing the page on the wiki about the fact that they don't support disconnect supervision (bastards!). However, apart from that, I do have it working fine for incoming calls. Is there some trick to get asterisk to detect the hangup tones from SBC? I've tried busydetect and callprogress as suggested, but neither

Thanks Peter, Yes, indeed the problem seems to be exactly what you describe. It's overhere the same. If I dial a mobile number it disconnects immediately when I hangup the mobile. But for analog numbers it takes around 10 seconds or so... Well, at least now I know how to debug pri :-) Walter. On Thu, 29 Jul 2004, Walter Klomp wrote: > However, if I dial-in from the SIP phone to my

---------- Forwarded message ---------- From: Arun Kumar Chaudhary <uniquearun04 at gmail.com> Date: Sat, Jun 21, 2008 at 4:51 PM Subject: Detection of Answer, hangup,busy etc while using Dial command To: asterisk-users at lists.digium.com. Hi Guys, I am in kanpur, India. I am using Dial() command in my phpagi script. I am unable to detect whether it is connected to the dialed number, if

Hello I have configured TDM400P with asterisk . The problem is that when i make a call to server. and while going on it dont detects call hang up. ie i called the Asterisk server and it start playing files that i indicated to do so in extensions.conf i suddenly put down the phone. now the server must detect that phone is hangup but it dont. How can i make server to detect this -- Best Regards

Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup