similar to: sample REGEX's for astcc

so i have been running v1-0 on all of my test boxes for about a month now testing iax/sip/res_xxx. I decided to put it into production so I updated a box that was running 0.9.? that had been working perfectly for months and low and behold the inbound line from telco now intermittantly doesn't clear and none of the other channels can dial out on that line. I have tested the line in this

hello all- has anyone had any problems with the handsets on BT100's. Just picked one up for my lab and the speakerphone works great but I am only getting one way audio (incoming) from the handset. Since the speakerphone works fine, I can't think of any config. reasons why the handset wouldn't other than a faulty handset. Any thoughts or experiences? Jason Kawakami Technical

-----Original Message----- <snip> Is this possible with asterisk? Anyone have a sample dialplan? -other than the problem outlined below I would try something like S,1,wait(20) S,2,voicemail(uwhatever) S,3,hangup That should ignore the call for 20 seconds and then leave a message in the unavailable greeting for 'whatever' then hangup That leaves another problem -

-----Original Message----- My question concern outgoing calls. How can I configure my extensions.conf to get a PSTN line on my TDM04B card in the following order : first trying on the channel 4 then if 4 is busy then switch to 3 if 3 is busy then switch to 2 and if 2 is busy then say there's no more line available. I don't want to dial on the first channel as it's my main number

I have 4 7960's that I am trying to get working but 2 of them will not update to the SIP image on my tftp server like the first ones did. i keep getting the error on the phone 'Defaulting CM to TFTP server' like it isn't seeing the *.bin on the server. are you supposed to have on of those for each phone? would be like cisco et al to do something like that. TIA Jason Kawakami

I'm thinking about using asterisk as an IVR system with an existing avaya index system. I've got 2x PRI 30 lines coming in to the Index, and I have 4 spare PRI cards in the Index. I was thinking about using a QUAD PRI card from Digium and having the calls come into the Index then transfer to Asterisk for IVR then back to the Index. That way if we get 60 inbound calls we'd in

I need to be able to dial a long distance provider that uses an access number and an auth code. I would like to be able to program this so that the user can dial 8 and then the long distance number, asterisk will hopefully do everything in the middle. The sequence to accessing the provider is on my traditional phone speed dial as: * Dial local access number * Wait 5 seconds * Dial the auth

I am new to Asterisk. I am trying to ascertain the hardware setup (and associated cost) I would need. The documentation in the wiki (and elsewhere) is extensive but I am somewhat lost in product model numbers. Hence I need an initial recommandation to work on. 15 incoming lines, 25 employees). Initial scenario is to use * as a plain old PBX. I need voicemail, ability to transfer calls, ... I

BR C.

I would like to integrate * with an existing Altigen PBX. I want to spend as little money as possible to make it happen. My main goal is to inexpensively connect a branch office to the phone system. Eventually I would like to replace the Altigen system with an Asterisk server so I don't want to spend any money on Altigen hardware. Currently the Altigen has analog interfaces with a couple

Hello All, Just looking some comments from gurus about this proprietary systems and phones: Inter-Tel Eclipse2 Model name: IP PhonePlus I did not find anything useful or reasonable about their products on their website or even in Internet.... except sales. -- Thanks and regards, Vasyl Rublyov

We are in the process of ordering a Voice PRI to plug into Asterisk. Of course we will be buying a card from Digium for this. Question is this, there seem to be MANY options technically when ordering this PRI (in the US) but since this is the first time ordering a voice circuit I am clueless as to what options we need. Any clues would be helpful or maybe something has already been written

After our department went to using *, I've had several inquiries about doing VoIP for my entire organization (Small county). We have ~10 locations with various links in between (Mostly p2p T1s, some Frame (1.544mbps commit), some ISDN, some VPN over 768kbit internet) Right now we're using several NEC Electra Elite systems, and 2 Nortel Meridian systems. In one of the main locations we have

Does anyone have a mysql query that will compare a number from the asterisk cdr to a table of international country+city codes to determine the closest match? The two fields are; 1. Asterisk mysql cdr 'dst' field - sample record value '011441316551212' 2. rate table data like this DialPattern 011447977 011447979 011447980 011447981 011447984 011447985 011447986

----- Original Message ----- > From: Greg Hill <gregh-asterisk@hillnet.us> > Subject: Re: [Asterisk-Users] New to * > To: Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users@lists.digium.com> > Message-ID: <Pine.LNX.4.44.0409031231070.1975-100000@hillnet.us> > Content-Type: TEXT/PLAIN; charset=US-ASCII > > On Fri, 3 Sep 2004, Bill

----- Original Message ----- > Message: 3 > Date: Thu, 16 Sep 2004 07:57:15 -0400 (EDT) > From: David Troy <dave@popvox.com> > Subject: Re: [Asterisk-Users] No Caller Name sent from Asterisk over > National or DMS100 PRI to a Norstar MICS? > snip> > > I have a PRI link up and running between Asterisk and a Nortel Norstar MICS > > v4.1 . I'm having a

Back in the office post-astricon. 1.0.0 running in the lab. YIIIIIIIHAAAAAAAAAA! THIS GUY!!!! rocks. Thanks to Mark for *, Steve and Olle for the conference and to ALL community members. Everyone using * is contributing in one way or another. See y'all next year Jason Kawakami www.optellabs.com

----- Original Message ----- <snip> > I've downloaded the * software and the zaptel drivers. look in the zaptel source directory and you will see a file called README26 (i think, or something like that) i am not a linux expert but my linux 'experienced' partner told me something about the 2.6 kernel... > > And now, to be quite honest, I haven't got much of a clue

Hello all- Playing around with res_odbc (thanks bkw) and have successfully gotten sip.conf to run but am having difficulty with voicemail.conf and extensions.conf. I used the load_res_config.pl script for each one and all of the data seems to be in the DB but * doesn't seem to see anything after a reload even though it is acknowledging a load of x.conf (where x is extensions/voicemail)

-----Original Message----- > -this is very true, however, the current version of the Axxess software > (9.0) supports SIP trunking natively on the IPRC. I just got my Axxess > upgraded and am salivating to get * connected to it. Hmm, so 9.0 is out and it supports SIP natively. How did you plan to integrate the 2? -The Axxess will see the * as it would see an IP service provider.