similar to: Looking for FXS device - CISCO ATA 186

I'm looking for an ISDN card that will work for me using either the i4l or capi with asterisk under Linux. I'm in the US, so I need an ISDN-U interface. Can anyone tell me if this card will work for me? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=14922&item=6700879965&rd=1&ssPageName=WDVW There are a lot available, and for what seems to be a good price, if

I'm looking for a zaptel type device with one (or more) FXO and one (or more) FXS port. Basically this guy would sit in-line of your phone line (PCI card). Any suggestions? TDM400 would be overkill. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050515/d66e6335/attachment.htm

Hi, I have been looking for info on * and the BT Easicom 1000 without much luck when i found a post to this list from Andy Powell saying that he had the phone working quite well. Before i go buy a shedload of these things I would like to know what problems/sucesses people have had with these phones and * in the UK. What they can/cant do with * Also does anyone know of any good ADSI

3com have some goods POE kit and some very nice managed wall jacks that supply POE and are fully managed. Here's an auction that the seller just closed:- http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=40990&item=5708757277&rd=1&ssPageName=WDVW Last time I spoke to him he had 5 boxes of 20 units and was willing to sell them at around $575 with a bit of arm twisting.

101's for 68.00 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3042066051&category=11175 102's for 79.95 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3042066389&category=11175 Just passing what I find along.... bkw

Hi. Please excuse me asking this again. But it really puzzles me. We're installing asterisk at a branch office at NJ (HQ is at Petach-Tikva) It'll need to support 5 POTS lines, 11 analog extensions and four VOIP phones. I wanted to go with a T1 card from digium and a channel bank, but we have a dead line. It has to be up and running by January 1st. I don't have the time to start

Digium X100P / new cards are is available on ebay for $43. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3073050567&category=3309 <http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3073050567&category=3309 > Hope this helps to who want to play with X100P! Are these being sold by Digium ? I don't know ?? - SamW -------------- next part -------------- An HTML

Hi Folks, Does anybody have experiences with plugging 3 TDM400P cards in one PC?? I think about a Asterisk box handling 8 incoming analogue lines and providing 4 lines to an old analogue PBX. I read a lot about trouble with the TDM400P cards so this idea seams to be not really god, or? Ciao Joerg -- _____________________ Don't PANIC

Is this an acceptable machine or does it have to be "rackmount" ? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250111166910 - rh -- Abba Communications Spokane, WA www.abbacomm.net

Since i'm sure there are others out there in the same position as me, being disappointed that the original T400P and E400P cards are no longer available from Digium, I thought I would pass on a place I found to get them. I needed the older card, since I didn't want to have to get a motherboard with 3.3v pci slots on it.

If anyone is looking, I just ran accross an ebay auction for X100P Cards at what I thought was a very reasonable price. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3046843672&category=48483&rd=1 --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software -------------- next part -------------- An HTML attachment was

Did CentOS get an alpha yet How does this one look? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160115818814 will it do the job or not? - rh -- Abba Communications Spokane, WA www.abbacomm.net

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230492577678#ht_500wt_1076

Hi all, I have this project that requires me to use 8 PSTN lines and possible more. I was thinking 2 TDM cards with FXO modules. The I got to read the "Qs about FXO/FXS cards" thread and that scared me. Can anybody recommend anything that is known to work ok with no mysterious problems? I was thinking OpenSwitch12 cards. What do you guys think? Any help is appreciated. Regards, Hadi

I'm just wondering if anyone knows the story with these... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=5721202362&ssPageName=STRK:MEWA:IT He claims they support IAX2 and SIP... but almost no history on the account selling them. I didn't see anything in the wiki about this company either.. Does anyone have any history with these phones? Thanks, Jared

I currently have two Cisco phones, a 7960 and 7970. The 7960 has a SIP OS on it and the 7970 has a SCCP. When the 7960 powers up it loads OS79XX.TXT, SIPDefault.cnf, SIP000E3875266C.cnf, RINGLIST.DAT, and dialplan.xml. I have a Cisco SmartNet agreement with the phone so I have access to download the firmware. I recently purchased a Cisco 7970 phone and was in the process of configuring

Slightly OT, but I think this is of possible interest to many of you, I need to get a UPS for my asterisk box. They are rated in VA but I can't quite figure out how that converts to real life. I have a PIII-800 box with two X100P and one TDM400P plus graphics adapter, an IDE hard drive etc. Will a small 400VA box be enough for this? tia

I need to connect up to sixteen phones per building, I can use a cheap hub, but POE would be useful. Is there a cheap POE hub available? Everything I have seen has been expensive. Chris Mason

> Hi! > >> We are in the process of an Asterisk call center deployment using IAX2 >> G711 ulaw softphones. Outbound sound quality is terrible. RESPONSE: This is Bill McCready from PCPhoneline.com . To address your sound quality issues, you may want to check out our VTA1000 Skype+SIP+IAX2 Tri-Mode Gateway which plugs into the USB port of a Windows computer. You can use it

Me again... I have service with a company that does not allow for a BYOD plan. They will not give out credential or server info either. Is it possible to run the FXS port of the ATA to an FXO port in *? The service I have is throug Broadvox Direct using the Mediatrix 2102. I have tried this using loop start and kewl start. The * box sees the incoming ring, picks up and starts my dial plan. But