Displaying 20 results from an estimated 1000 matches similar to: "can not dial problem"
2008 Oct 20
1
Zaptel FXO offhook when connected to PSTN
I installed Trixbox and a TDM400P with 2 FXO and 2 FXS ports and am having
an annoying issue with the FXO ports. As soon as I plug either one into the
phone line it's as though the line is disconnected i.e. get disconnected
tone when trying to dial out, line is busy when dialling in.
The CLI shows the following:
trixbox1*CLI> zap show channel 4
Channel: 4
File Descriptor: 18
Span: 11*
2005 Jun 28
0
BRIstuff/OctoBRI problem: Ring requested on unconfigured channel 255/255 span 5
Hi all,
I just posted this question before last week.
Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to
1.0.8-BRIstuffed-0.2.0-RCh
the same problem occurs, but seems to be more seldom.
Attached is now the output of "zap show channel" .
-
I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM
equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.
2008 Nov 11
1
What makes TDM400 FXS Connection to TELCO go into Off Hook State?
I've been having trouble with making outbound calls to my
TELCO from a TDM400 card (FXS KS signalling) after upgrading
from 1.6-beta9 to 1.6.0. The problem is completely intermittent.
When it fails, I get this message:
[Nov 9 19:12:26] WARNING[18916] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
At some point, it starts working, but I don't know what
2012 Jun 03
1
Dahdi 2.6.1 with OSLEC support
In order solve my incoming caller ID problem, I upgrade the dahdi to
version 2.6.1 from version 2.4.x. After upgrade, I found the echo
cancellation doesn't working (I'm using Digium AEX800B PCI Express card). I
can hear my self talking on the phone. How to solve this? I think I need to
recompile dahdi 2.6.1 with OSLEC support? how?
[root at callcenter ~]# dahdi_cfg -vvv
DAHDI Tools
2008 Oct 23
2
Hylafax asterisk iaxmodem problem
Hello all,
I have an asterisk box running in a customer with Hylafax, iaxmodem,
asterisk 1.2.18.
The service can receive faxes, from a lot of fax machines, but there
are a couple of them that asterisk Hylafax cannot complete.
This calls arrive the asterisk box, asterisk detect that this calls
are fax, asterisk answer the call, and then Hangup the call. But
hylafax do not receive nothing.
When
2005 Mar 25
1
X100P FXO card-No Dial Tone
Hi
I have the X100P card which as to sockets (LINE - for fxo line ) and PHONE (to connect a n analog line)
This card is setup as fxs_ks
I was getting dial tone but suddenly no Dial Tone....Help appreciated....
When I try to route the Call using - Dial Zap/1) to this FXO Line I get this error:
-------------------------------------
linux*CLI>
-- Executing
2007 Sep 27
1
Zap channel stuck in conference
Hello, I have a strange problem with one of my Zap channels. A user told me
that he was in a voicemail system during a call, hit the Flash button, and
the call hung up. Now we get no dialtone on the phone hooked up to the
channel. Here's the status of the channel:
jmartin at rogue:~$ sudo asterisk -r -x "zap show channel 7"
Parsing /etc/asterisk/extconfig.conf
Channel: 7
File
2010 May 07
1
DAHDI astribank Channel Unavailable
Hi guys,
This has been bugging me for days and I can't figure out what's happening.
Using the same channel on DAHDI, I can't make a call after previous one being hung up by remote side. However, it works like it should if my end hangs up the call. To make things interesting, DAHDI, or astribank rather, seems to "reset" itself after receiving an incoming call on that DAHDI
2009 Dec 24
0
X100P clone card problem
Hi,
I have problem with X100P clone card.I can not force it to work
under Asterisk 1.4.27.1 and DAHDI Version: 2.2.0.2.
I looked over and over on configuration and could not see any mistakes.
Here are relevant configuration files.
/etc/dahdi/system.conf
> fxsks=1
> echocanceller=mg2,1
> loadzone = hu
> defaultzone = hu
>
dahdi_tool
> OK Wildcard X100P
2009 Sep 27
2
DAHDI congestion problem
I am unable to dial out over a Wildcard TDM400P. This was working previously, so must have
messed up the config somehow. I'm running Asterisk 1.6.0.15, with FreePBX 2.5.2.2.
When I dial, I see:
-- Executing [s at macro-dialout-trunk:19] Dial("DAHDI/1-1", "DAHDI/g0/9239220,300,") in
new stack
== Everyone is busy/congested at this time (1:0/1/0)
It looks like the
2009 Aug 17
0
Echo on TE121B with hardware echo module
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
I recently upgraded my Asterisk system to Dahdi and now I have an echo
problem.<br>
<br>
I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium
TE121B PCI express card with a HARDWARE echo
2020 Mar 27
0
AX-1600P FXO port configuration
Hello everyone,
I have a Atcom AX-1600P(1) card with a FXO module and I can't configure
it. I have four extension with this PJSIP settings:
--- /etc/asterisk/pjsip.conf ---
[transport-udp]
type=transport
protocol=udp
bind=0.0.0.0
[6001]
type=endpoint
transport=transport-udp
context=from-internal
disallow=all
allow=ulaw
auth=6001
aors=6001
direct_media=no
rtp_symmetric=yes
force_rport=yes
2004 Jul 11
1
Echo issues (again...)
OK... so I'm not sure what I'm looking at. I've had the good old echo
problems on my Rev C FXO again this morning, so I thought I'd attempt
some debugging, though I'm not sure what I'm looking at.
This call has echo.
Channel: 2
File Descriptor: 20
Span: 1I>
Extension:
Dialing: no
Context: incoming
Caller ID string: "External Call" <99999999>
Destroy:
2009 Jun 09
0
FXO- no dial tone- no call progressing
Dear all,
I connected a normal phone line to the FXO port but the call is not being
processed. The following is the output to asterisk console when I dial 9150
"9 is the prefix I configured and 150 is a local service in to know the
current time"
*CLI> -- Executing Dial("SIP/4444-d365", "Zap/1/150") in new
stack
-- Called
1/150
-- Zap/1-1 answered
2004 Jun 01
1
Zap and call pickup -- it don't work.
The problem: T100P connected to an Adit600. Channel 1-16 are FXS, 17-24
FXO. I have Zap/24 in callgroup 3 and Zap/1-16 in pickupgroup 3. When a
call comes in on Zap/24 I cannot pick it up with *8 from Zap/1-16.
*CLI> show version
Asterisk CVS-04/27/04-23:48:08 built by root@tuck on a i686 running Linux
The zapata.conf and extensions.conf are located here:
2014 Jan 31
0
e911 Signalling
Hi,
We've got a dedicated T1 with two trunks running into our ILECs
selective router for 911. Split out of the T1 into two MF CAMA trunks
on ILEC side.
I'm trying to use asterisks e911 signaling, but I'm having trouble with
the dial command. (== Everyone is busy/congested at this time (1:1/0/0))
I'm missing something and I'm thinking it has to do with the hookstate
2004 Jun 20
1
Data over Voice through Asterisk
Hi,
I'm trying to make a dialup internet connection through my asterisk
PBX. When I bipass the Asterisk box, I can get 51600bps. When I run
through the asterisk box, I'm limited to about 21600bps.
I have a TDM31B card.
Any help on speeding these connections up would be good - I was on the
understanding that if you bridged the channels, then the call should
essentially flow straight
2005 Aug 12
3
TDM400P FXO channel hookstate always "Offhook" & outbound digits sent before provider dialtone
I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a
TDM400P with (1) FXO card on port 4. Inbound calls are always successful
but outbound calls fail 75% of the time with intercept messages from my
dial tone provider that include "we're sorry, your call did not go
through", and "we're sorry, when placing a local call it is now
necessary to dial an area
2004 Aug 03
1
Analog channel stays offhook
Hi,
We are having a problem with asterisk detecting that an analog ext has been
put down. This seems only to happen after a number of calls have been made.
We have an FXO port (TDM400P with FXO module) connected to our PBX and are
using this to test asterisk prior to rolling our for our small office.
What happens is that we make a number of calls to this ext which 1st rings
a phone (FXS)
2005 Jan 24
2
Wildcard TE405P and TDM400 - TDM not working
Im having a problem getting the 2 cards working together.
I added the TDM with 3 FXO and 1 FXS board.
The TE405p is working fine. THe TDM registers and identifies the FXO's
and FXS but cant get them to go off hook.
I hope someone can help.
Asterisk seems to THINK its dialing it sends manager status as dialing,
and it just sits there with no tones, on the phone dialing out.
If I dial,