similar to: Odd behaviour between Grandstream and Xlite

hi all, was wondering if someone could assist with a slight problem i'm having. I have asterisk setup with extensions 101 to 109 and am using xlite, grandstream budgetone, polycom ip500 and a couple of other phones. the problem is: 1. only the xlite extension (107) can receive calls. 2. all extensions can dial into voicemail and get mwi when msgs are received. 3. when dialing a non-xlite

Is anyone using this combination successfully? I have a dell 500sc running rh9 and asterisk 1.0rc1. It is configured with an x100p. I have a Sipura SPA-2000, laptop with Xlite and a Grandstream Budgetone BT-101. I have signed up with Voipjet (they use iax2). I also have an FWD number via iax2. I can sucessfully call back and forth to all devices via zap, sip, and fwd. I can successfully

I see my own number(or remote called num) instead of caller id on incoming calls on my BT-102. but on Xlite everyything is OK. I'm using * latest CVS. - shabanip

Dear all, I have tried to run an asterisk instance together with XLite on a single machine (a PowerBook). The intent is to take advantage of IAX connections to easily cross NATs while traveling. While the IAX setup proved 'easy', just having to fiddle a little with working configs at both sides, I did not succeed so far in getting XLite to connect to the local Asterisk server, AND be

I have a bunch of road warriors who I've set up with Xlite clients. Unfortunately the sound quality has been intermittent at best. Sometimes it's great other times completely unusable. When it's bad one usually hears harsh static when the other party speaks or their voice gets "clipped" to static if they speak too loudly. Many of these users have migrated to Skype ? much

Hi, I'm wondering if anyone has experienced an issue with the XLite softphone and asterisk accepting dtmf? I can listen to my voicemail perfectly from my hardphone. However when I dial the voicemail number from my XLite softphone and enter the password at the voicemail prompt, an error appears vm-incorrect and I get an "Unable to read password" message on the asterisk console. Has

Dear All, I have downloaded the xlite version 2.0 for windows and I made the following conf in the xlite itself as the document suggested in order to make it work with Asterisk but still it doesn't work as a matter of fact when I tried to make a tcp dump I can see no packets going between the windows client and the Asterisk server at all, here is the my conf on the xlite itself: in the

I am using the latest xlite phone to connect to the latest version of asterisk (20040727). When I try to make a call the xlite phone tells me "Call not approved". I used the configuration options that were listed on the wiki. The context in the sip.conf file is "from-sip". I have a matching context listed in the extensions.conf file. The phone is able to register

I have Asterisk configured and can place calls from XLite. But when I call my Asterisk box and try the extension where I'm logged in via my XLite, it doesnt ring and goes immediately to vm. I'm using AMP. Any ideas?

Lets presume that my both software are open. Xlute and Eyebeam But I want my calls from Asterisk to land only on Eyebeam and Not on xlite. How to set it ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090129/4011be6c/attachment.htm

What's the secret to getting sound through Xlite? The SIP messages all look OK to me, but the sound isn't coming through. It was trying to use GSM, so I searched the archive and tried: disallow=gsm allow=ulaw Now it says that it's using ULAW but I still get no sound in either direction. Phil Skuse (MBJEJPIEUI) <phil.skuse@vicorp.com>

Has anyone managed to get these two phones to make a video call to each other ? If so, care to share how the hell you managed ? the GXV is at the latest firmware, and xlite the latest download Asterisk 1.4 trunk TIA Julian

Man, I really feel stupid, but after banging my head on a brick wall for several hours ... I need help! I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten 5707, and I've got an xlite on 5608. When I make a call from an outside line, I dial SIP/5608. The little blinky light on the GXP that's monitoring 5608 goes, well, "blink blink". :) I then press

Hi, I installed asterisk server in my linux box. I configured a user 1000 using xlite and registered with asterisk server in the same linux box. I configured one more user 1001 in other box and this user also got registered with asterisk. But i am facing two issues here. 1. When a call is made from 1001 to 1000 i could see an incoming call blinking but no audio flow is observed. 2. When i made a

Hi, I have an Asterisk box behind a NAT address and also a Xlite 4 soft phone behind a different NAT network. Asterisk -> Nat -> Internet -> Nat -> Softphone. I can register my softphone to the asterisk box ok via SIP but the RTP stream from the asterisk box is addressed to the private non-routeable address of the softphone when I turn on rtp debuging. How can I configure the rtp

-- Attempting native bridge of SIP/1009-3df0 and SIP/101-f8f1 -- Attempting native bridge of SIP/1009-3df0 and SIP/101-f8f1 RFC3389: 5 bytes, level 0... Aug 27 08:32:16 NOTICE[23572]: rtp.c:289 process_rfc3389: RFC3389 support incomplete. Turn off on client if possible Killed Whenever I make a call between extension 101 and 1009 which are both Xten Xlite SIP clients, I get that error and

Hi all, I'm testing Linksys SPA922 phone and I have strange issue. when call is finished on the phone I see "CallEnded" and normal silence for cca. 5 seconds and then I get fast busy for cca. 20 sec. So, this isn't automatic hangup as on other phones I have tried (Cisco 7940, grandstream, XLite,... ) and I have to manually hangup handset to finish a call. Is this normal behavior

Hi there, I have tried very hard to setup the x-lite with asterisk, but until now i didn't get sucess. When i start the asterisk in debug mode, i see the message: sip/2.0 401 unauthorized. I know that this problem with authentication. I put in my sip.conf as below. [2203] type=friend username=2203 auth=md5 secret=1234 reinvite=no canreinvite=no dissallow=all allow=gsm

Good evening all. I'm having this strange behavior when dialing two or more simultaneus calls via IAX to other * boxes. Sound starts to have more latency, wich increments until it's almost impossible to talk (6 or more seconds), I try this calling with two grandstreams, one grandstream one tdm410p, one tdm410p and sjphone, sjphone and one grandstream, the result are similar.

Hi, I have install asterisk and it works fine. But when I use Sjphone and I use Ethereal a Client send "Request:OPTIONS sip:obelix.foo" and Server answer "Status: 404 Not found". But i can talk with two client and asterisk. When I use Xlite i don't have this request it's clean. I don't understand??????????????