similar to: Installation on Fedora 3

I am trying to use Syslinux as my boot loader for a stripped down version of Knoppix (DSL) on a USB Pen Drive. I followed the instructions verbatim on http://rz-obrian.rz.uni-karlsruhe.de/knoppix-usb/knoppix-usb.html, but no luck. The system will start to boot to the USB, but gives a Kernel Panic. I will give all information that shows on the screen. After I select Boot from USB (which on my

Thanks to the kind person(s) who worked on this. I am using PCI passthrough right now and it works. I hope support is added for VT domains too; That would be extremely useful. So far I have tried a NIC, USB, and PCI Video. The NIC works flawlessly. USB works as long as the devices are present at the time the domain is started. Hotplugging USB devices seems not to work. If I open

Can someone show me how to set up DUNDi, I will be using it to connect 14 asterisk servers internally. I don't want to use it on the external world. If anyone has any examples of connecting 2 or 3 (if their is a difference) machines in a DUNDi co-operation that would be helpful. Johnathan Falk Network Administrator Clinton Community Schools

Jared Smith, Jim van Meggelen, and Leif Madsen of the Asterisk Documentation Project, in conjunction with O'Reilly Media are pleased to announce the official release of Asterisk: The Future of Telephony on Friday, October 14, 2005 at AstriCon 2005 in Anaheim, CA. In the true spirit of Open Source, the authors and O'Reilly Media have published the book under the open, Creative Commons

Dear All Can you please let us know how we can modify our Asterisk "extensions.conf" file so it interprets the subscriber dialed digits in one-by-one digit manner . At its current configuration , it interprets them in an whole packet . I mean , say the subscriber dials as "665 0000" so we need Asterisk to send it to the peer switch as 6,6,5,0,0,0,0 but not as one

Dear colleagues, I'm planning to debug usb connection with my new SONY CLIE handheld, and found that this process is much complicated by the fact usb.ko module can not be unloaded 'cause some process is referencing it: marck@revamp:~/tmp> kldstat -v -i 11 Id Refs Address Size Name 11 1 0xc0cf7000 1b000 usb.ko Contains modules: Id Name

I have two computers running Ubuntu 8.04 with all updates. One with EHCI and OHCI host controllers recognizes my Tripplite OmniPlus1000LCD UPS, but the other (VIA chipset) with EHCI and UHCI does not. When I compiled the kernel with USB debugging enabled, I could see that the handoff from EHCI to the low speed UHCI controller was failing leading to endless looping as the EHCI was repeated

Hello, i will describe my approach 1) I have downloaded Centos5-64bit xen image from jailtime.org 2) I have created own swap image with 512MB file size 3) I have used same as dom0 kernel 2.6.18-53.1.19.el5xen 4) I have mounted my image file and copied /lib/modules/2.6.18-53.1.19.el5xen 5) I have created custom ramdisk for domU with mkinitrd --with=xennet --preload=xenblk

I had a supermicro server SuperServer 1027R-WRF4+ and a old Dell PowerEdge 2950. In both machines I setup centos 6.5, which is running 3.10.34-11.el6.centos.alt.x86_64. I follow Xen4Cen wiki to setup Xen, I had other servers running Centos 5.x without issues. Now, once I build my vm's dom-u centos 6.5/centos 5.9 both x64, I receive different erros, let me show u the message I receive in my

Hi, Im trying to compile kernel 3.0.4 inside Centos 5 DomU The steps I do are Make bzImage Make modules Make modules_install Depmod -a mkinitrd /boot/initrd.img-3.0.4 3.0.4 but them im getting this -bash-3.2# mkinitrd /boot/initrd.img-3.0.4 3.0.4 ls: /etc/modprobe.d/*.conf: No such file or directory No module ehci-hcd found for kernel 3.0.4, aborting. If I exclude the

Hi, I'm experiencing recently happend kernel panics while making bacula backups on my external USB harddisk. It first happened some days ago while I was running 6.4-PRERLEASE. I then updated to 6.4-STABLE and enabled all the kernel debugging stuff. I've uploaded "screenshots" (including backtrace) here: http://pics.pofo.de/gallery/v/misc/ I'm now not sure if the external

Hi all, I had a chance to use some call conferences that had some very neat functionalities: - When you call you are first asked for your name - When someone joins the conference a message "<name> is now joining the conference." is played. - When someone leaves the room a message "<name> has left to conference." is played. How can I set MeetMe/Asterisk to have

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, As I understand it, IAX2 trunking requires zaptel timing. Zaptel timing is provided by Zaptel cards, ztdummy or ztrtc. ztdummy requires usb-uhci and ztrtc can't run on smp systems. So if you only have smp systems with ohci and no zaptel cards (because it's a sip/iax2 gateway) then you're screwed? - -- Regards, Tais M. Hansen

I would like to have the ability to have Asterisk announce the temperature -- not using TTS -- within the dialplan. For a non-Asterisk project, I have a cron job that periodically pulls down an XML file from weather.com containing local weather data (TWC's user agreement requires that data be cached locally). Using sed, I also create a text file that contains only the numeric value of the

On Aug 7, 2014, at 7:57 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > I have tried to plug it into every USB port (including the USB 3.0 > ones) and I still get these errors. I discovered that power cycling > the UPS will fix it for a while, and also unplugging and replugging > the USB cable will also fix it sometimes. Error -32 is EPIPE, which means that the PC

On 10 August 2014 09:05, Charles Lepple <clepple at gmail.com> wrote: > On Aug 7, 2014, at 7:57 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > > Error -32 is EPIPE, which means that the PC didn't see a reply from the device during the descriptor read. I don't know that we have ever successfully run one of these issues to ground. > Considering Eaton do

I am trying to create a para-virtualized guest with the same kernel image and initrd image as dom0. The configuration is below ================================================================================ kernel = "/boot/vmlinuz-2.6.21.7-3.fc8xen" ramdisk = "/boot/initrd-2.6.21.7-3.fc8xen.img" memory = 428 name = "fedora.fc8" vif = [ '''' ] dhcp =

Hi, I recently purchased a new Easton 5E UPS. I plugged the USB cable into my computer so I could use the NUT UPS tools. However every so often NUT fails to connect to the device after a boot. Looking at dmesg I see errors like this: [ 3.277075] usb 1-9: new low-speed USB device number 6 using xhci_hcd [ 3.302091] usb 1-9: device descriptor read/8, error -32 [ 3.430241] usb 1-9: device

I am having an issue getting a DomU to boot properly. There is never any indication of a stop error or kernel panic, it simply hangs after "Starting crond [ OK ]" and never continues. I''ve included my mkinitrd and output from xm create... please help! ##### XENBUS errors ##### XENBUS: Device with no driver: device/vbd/2049 XENBUS: Device with no driver: device/vbd/2050

Hi, I am struggling to get rid of a conflict on DELL 2800 : PCI Parity error (EB113 on the display) I am learning linux and asterisk as I go along, there might be obvious things I should know, but bear with me. >From demsg below my 2 digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no