similar to: Eyebeam Vs. Windows Messanger,

-----Original Message----- From: Ferguson, Michael Sent: Tuesday, February 01, 2005 11:35 AM To: 'asterisk-users@lists.digium.com' Subject: Messaging with * and eyeBeam G'Day All, Eyebeam has gotten my interest but I do not have a "high-altitude" view of its interraction with *, therefore my questions. I called xTEN but they preferr to talk to telcos and ISP's

G'Day All, Eyebeam has gotten my interest but I do not have a "high-altitude" view of its interraction with *, therefore my questions. I called xTEN but they preferr to talk to telcos and ISP's purchasing hundreds of the eyebeam software... Kind-a stuck here. I already have * happily running and taking care of business on my Windows network. I also have Windows IM running on

In an attempt to eliminate audio echo I upgraded one side of a working x-lite to x-lite connection to eyebeam. No joy, and what was worse is the audio was even worse now - just noise. Ok, I upgraded the other side to eyebeam and same thing. I'm not even using video (will enable it in sip.conf later, one change at a time). The connection looks something like: eyebeam client

Hello I'm using eyeBeam, and Asterisk keeps sending my clients a second call, when they are still in one call (because eyeBeam has lots of channels). I was using X-Lite (with 3 channels) and Asterisk never sent the client a second call. How can I force Asterisk (or eyeBeam) just to send one call at each time. Is this a configuration I need to do in eyeBeam or Asterisk? Thanks Regards Joao

Hi All, So I've been exploring the use of G.722 encoded wideband audio recently. I have three different SIP devices that allow this: Eyebeam, IP650 and a Siemens S865IP. The Siemens and IP650 seems to work fine together. Calls pass between them in what the Polycom notes as "HD" mode and the audio quality is certainly very good. However, things are not so easy with Eyebeam and the

Lets presume that my both software are open. Xlute and Eyebeam But I want my calls from Asterisk to land only on Eyebeam and Not on xlite. How to set it ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090129/4011be6c/attachment.htm

Hi, I'm trying to find how to configure Asterisk 1.2.7.1 to allow two EyeBeam (3015c) to send Instant Messages between them... But I cannot find anything that explains how to do it! Anybody as a clue? is it possible? Now, when we try to send an Instant Message in the eyeBeam it says: "User not available". In asterisk console appears a message saying: ------ Apr 18 17:13:22

Hi, Recently I been using EyeBeam with Asterisk. I can make calls with video, I'm using two PCs with EyeBeam but I noted that I can't enable only one client to stream video, I mean if I start streaming video on one client the other one doesn't receive any video until it starts streaming video itself. So I cannot have unidirectional video calls. I remember this problem with

I am trying to connect two Xten eyeBeam Video Phone No problems in voice connecting. I tryed to modify my sip.conf [general] language=it videosupport=yes ; enable Asterisk video support port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=h263 allow=gsm allow=ulaw allow=alaw ; H.263 is our video codec ;

I am having problems with Eyebeam when the user dials a number that is not available. This problem exists with both Asterisk 1.4 and 1.6 using Eyebeam or Xlite. The problem seems to be that when the soft phone receives the 503 Unavailable response it will not be able to dial another number for a few minutes. Anything you dial will say that the number is unavailable and it will not even send the

Hi all, I would like to connect in sip mode an Eyebeam client to a messenger via Asterisk. I want to use video. Nat is not an issue as vpn connections will be used. Is this a difficult tasks, can someone give me some pointers to get started... Have a good week-end, Francois Random Thought: --------------- Wanna buy a duck?

G'Day All, Greetings and best wishes. Many moons ago I had an Asterisk system running. Steve Totaro helped me quite a bit. Just now I installed Asterisk NOW 1.5 Beta, and am at the command prompt.....I thought there was a GUI with Asterisk NOW. Anyway, where can I find the install/config documentation or how to launch the GUI, as I have look around on the site but cannot locate it.

G'Day All, Newbie here. How can I go about troubleshooting a fast busy when I dial my the phone number on my * server? Thanks. Ferg -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041012/a669d795/attachment.htm

Thanks everyone for your feedback, especially Mark. I now have the ALL the files I need. My order still stands for the $8.00 product from CISCO but the CP7960 dealer sent me all the files. Now I will move on to completeing the setup of the TFTP server. Thanks again -----Original Message----- From: Michael Loftis [mailto:mloftis@wgops.com] Sent: Friday, February 18, 2005 7:51 PM To:

Hello Everyone I just bough my Xten Eyebeam but i don figure out how to make the video works i only see a black screen where de remote video suposse to appear, Any help regarding this matter will be very preciated Thank You

G'Day All What do I type at the command line to stop and start * on a RedHat ES3 box? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041202/f9c92727/attachment.htm

G'Day All, Can anyone give me some direction in setting up the TFTP server on my RadHat ES3 box? I did quite a bit of reading, but I think I am more unsure now than before. I found the information nebulous. TFTP is already installed. I am trying to determine where the root directory for the tftp services is located so I can copy the CISCO 7960 firmware files onto it. Thanks.... Ferg

Lately I have been getting many complains that Eyebeam crashes when you dial a number that does not exist. This happens in both R2 and ISDN PRI lines. The softphone stops working and has to be restarted. The response I got from tech support was: the actual issue is that asterisk should not be sending a 503 service unavailable when a particular softphone is not online. The soft phone stops

Hello all, I was wondering if its possible to hook up eyebeam with video support to asterisk@home? Thanks Dinesh. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050913/0613e625/attachment.htm

Hi! I use Bria and eyebeam and it seems that asterisk doesn't send RCTP keepalives when a SIP channel is on hold. This is a known issue as is described here: http://www.voip-info.org/wiki/index.php?page=Asterisk+phone+Bria This gets very annoying because very often people are put on hold longer than 30 seconds (the phone's default.) In a company with more than 100 soft phones