similar to: Trouble with Quicknet Linejack

Hi, I am trying to get a prototype working based on Asterisk and Quicknet cards. I currently have to systems set up each with a LineJack card. I have the systems working, but can't get the voicemail demo to work properly. Messages to the user telephone set from the voicemail system are clear, but recordings left through the phone are distorted. Sounds like the audio has lots of echo and

Hi, I'm having problems with setting up my ISA LineJack card on Linux machine... I've done everithing according to documentation available, by compiling the new ixj driver (v1.2.1), loading it, adding device node /dev/phone0 with major number 100 and minor number 0, adding aliases into the /etc/modules.conf: alias char-major-100 phonedev alias char-major-100-0 ixj and running depmod

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

Hi all, I am still confused about the way to use asterisk with QuickNet Phonejack. If I am not wrong, The phonejack card should be using the phone.conf as the asterisk channel. I was initially confused with the ZAP channel (The digium card), now that I have found out that Phonejack should use the Linux Telephony Devices and its configuration file is phone.conf, but the question is I do not know

I cant seem to be able to figure this out. As much as I can tell it is a codec problem. I can dial out to 612@fwd.pulver.com and the "Call Me" test there rings my phone. However when the callee endpoint answers, there is a failure to translate: Outgoing Call for 612 612 is not a local user -- Called 612@fwdpulvercom No path to translate from SIP/fwdpulvercom-dd5a(2) to

Greetings: We have been running a CVS HEAD version of asterisk from Mar 10, 2005 on ix86 (PIII-600) Linux 2.4.27 with ixj (chan_phone) hardware. In a hope of getting better 'chan_skinny' support (to attempt using a Cisco 7920 IP phone) I built asterisk 1.2.40 on this box. Initial tests verify that our previous dialplan is working (iax2 trunks, register sip phones, registering withour SER

Hi folks, First off all, I'm new to asterisk. I'd like to make a basic installation of * with a Linejack, as recommended in this mailing list, I downloaded and setup successfuly the pwlib, openh323 lib, asterisk and chan_323. I have made little changes to default configuration files packed with asterisk and I managed to call with the telephone plugged in my Linejack a friend

Hi, I have been experimenting with Asterisk and the linejack card and have discovered the follow: 1) The linejack in FXS mode works well with asterisk as long as the format in the phone.conf is set to ulaw. With mode set to slinear, gsm recorded messages played by voicemail appear to be slightly choppy (sounds like a click at the end of each frame). 2) Using the configuration above, the

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

I don't have any experience of your problem - but I thought this might help. http://www.hut.fi/Misc/Electronics/circuits/uk_wiring.html <http://www.hut.fi/Misc/Electronics/circuits/uk_wiring.html> The UK (and some of it's former colonies) use a system called 3-wire ringing. Some equipment from overseas requires an adaptor to make it work. I don't know if the LineJack is one

Hello, I have ISA card LineJack. I could not find any information if this card can work as fxo with Asterisk. If it can work, can somebody point me how to install it on my Asterisk box. Or maybe there is some documentation about it how to install LineJack. I will be very thankful for any help. Regards Bartosz Jozwiak ------------------------------------------------- This mail sent through IMP:

I have a Quicknet Linejack. Actually, I want to make a standalone(no internet connections) call to my asterisk box running GNU/Linux. When I call the system it says: -- Executing BackGround("Phone/phone0", "demo-congrats") in new stack NOTICE[14349]: File channel.c, Line 1212 (ast_set_write_format): Unable to find a path from 2 to 1 WARNING[14349]: File file.c, Line 553

Hello All... I have searched in the archive and also followed Zara's instruction on getting incoming calls to work with Asterisk...but I still can't get Asterisk to answer incoming call on Linejack's LINE port. I attached a phone set to the PHONE port, and telco line to the LINE port on the Linejack(ISA) card. I have downloaded, compiled and installed the newest driver for

Hi list, I have some problems to get the QuickNet Internet PhoneJack working. What .conf files do I have to edit to get a dialtone for the first test with the standard configs from asterisk? I have the ixj driver running and a cat /proc/ixj after asterisk start tells me one reader and one writer. But if I pick up the receiver I don't get a dialtone nor I'm able to dial a number.

I found a message from you to the asterisk users mailing list from 2001. I was wondering if you got (or still have) an asterisk system working with the linejack? If so, would you be willing to assist me with mine? I seem to have things working, and * says that caller ID is coming in, but I can't get * to actually answer the call. Thanks, Greg -- NetIO.org

Good evening, I am just getting started with Asterisk. I have it installed, and I believe I am on the right track, overall, to get it working, but I can't get the linejack to answer any calls. At this point, all I'm trying to do is have Asterisk answer an inbound call on my linejack, /dev/phone0, and play a greeting or tone. I figure, once I am able to get asterisk to actually answer the

Hi there, I?ve been out for some months now, haven?t been checking the list at all. Does anyone know if the problem with the Quicknet Linejack (FXO) card dial out to PSTN with asterisk was solved? Is anybody working on it? Cheers, -Z -- __________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup

I want * to answer the phone when call comes-in. I've enabled /dev/phone0 in phone.conf and created /dev/phone0 with a command: mknod /dev/phone0 c 100 0 Though, when I start * I get: Parsing '/etc/asterisk/phone.conf': Found Sep 12 00:18:42 WARNING[16384]: chan_phone.c:950 mkif: Unable to open '/dev/phone0' Sep 12 00:18:42 ERROR[16384]: chan_phone.c:1141 load_module: Unable