similar to: phone rings when I'm using it over VOIP - WHY?

Hello. I apology in advance if I am not reporting things correctly, but my knowledge about these things is very limited. I have five Transtec computers, approximately born in July 2005; they have an intel 82845G video card. The last 'yum update' was on January 30, 2014. I did not reboot the machines at that time. I cannot be sure about the date of the 'yum update' preceding

A previous issue has popped up and once again I'm out of ideas. During the evenings it seems that the TDM channels will spike (dahdi_monitor) and will refuse to listen for audio of any type, this includes DTMF. The only resolution I know of is to stop Asterisk and restart the dahdi service, but that's not a solution. All channels look like this, even the FXS. [root at asterisk Hardware]#

Hello! After upgrade to version 2.0, now using 2.0.1, I'm experiencing problems with glusterfs stability. I'm running 2 node setup with cliet side afr, and glusterfsd also is running on same servers. Time to time glusterfs just hangs, i can reproduce this running iozone benchmarking tool. I'm using patched Fuse, but same result is with unpatched.

server:~# dmesg|grep pciback [ 0.000000] Kernel command line: root=/dev/hda1 ro console=tty0 pciback.permissive pciback.hide=(00:1d.00)(00:1d.01)(00:1d.07) [ 0.000000] Unknown boot option `pciback.permissive'': ignoring [ 1.210945] pciback 0000:00:1d.0: seizing device [ 1.211082] pciback 0000:00:1d.1: seizing device [ 1.211215] pciback 0000:00:1d.7: seizing device [

I have installed 5.2 on my work desktop and everything works perfectly EXCEPT the sound device. Here is the relevant lspci line: 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) I tried looking in Google (might have been a bad search), but all I could find was to add acpi=on to my boot line in grub.conf, and that

Hello again :) With POLLING enabled I experience about 10%-25% performance drop when copying files over network. Tested with both SAMBA and NFS. Is it normal? FreeBSD 7.1-PRERELEASE #0: Sat Sep 6 01:52:12 CEST 2008 fxp0: <Intel 82801DB (ICH4) Pro/100 Ethernet> port 0xc800-0xc83f mem 0xe1021000-0xe1021fff irq 20 at device 8.0 on pci1 # ifconfig fxp0 fxp0:

I've been struggling desperately to get iGuidance 4 working with Wine and I've come across what seems like an incredibly specific problem. I've been struggling with the TTS output for the navigation, it just keeps randomly locking up the app, sometimes after a mile, sometimes 30, after figuring out I could debug just the wave classes, I think I've found a clue. It keeps hanging

Did cvsup on a machine that does just mail processing (well, a lot of spam scanning) and it crashed not too much later. This kernel does not include MFC src/sys/kern/sys_process.c revisions 1.111 and 1.112: Use kmem_alloc_nofault() rather than kmem_alloc_pageable() in procfs_rwmem(). Use vm_page_hold() in place of vm_page_wire() since the page can be freed. Don't hold extra

Hi, I've been trying to debug RH 9 CD install problems on Dell GX260 line. The floppy installs are working just fine but CD install misteriously freezes before even getting at the prompt and booting the kernel. No messages, on contrary - screen goes black very quickly and I can just see for a split second something was there. I have just rebuilt install images with syslinux 2.04 and

Hi, I just compiled and installed the new Wine (1.3.10). I have succesfully installed Anno 1503 Gold edition. But after I start the game: a black screen appears, changes colors to blue, then back to black again, if I click on the screen a green screen appears. [Image: http://img525.imageshack.us/img525/6613/screenshotanno1503.png ] I guess this is a graphics card problem. I have an old

I have recently migrated from an old, RedHat Linux 9 - based system (Aurox 9.2) to Centos 4.4. I am having trouble with vnc causing X unusable until reboot. By unusable I mean that X screen is either blank or blinking and moving, which is not cured by X restart until reboot. My system is: Compaq EVO D510 SFF CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz RAM: 256 MB Video: 00:02.0 VGA compatible

Hi! I was testing 2.6.0-test5, but got lots of journal aborted errors. Then I Sysrq-s/u/b and wanted to boot 2.4.23-pre3 or 2.4.22, but ext3 error: cannot find root fs cannot mount because of unsupported optional feature (4) after trying to mount it with ext2 (rootfstype=ext2, not working) I rebooted again into 2.4.22, this time there was just severe fs corrpution, illegal blocks, inodes,

there is a problem in compiling asterisk-addons any one have fixed this problem. i want res_config_mysql.so any one help me ----------------------------------------------------- [root@localhost asterisk-addons]# make cc -fPIC -I../asterisk -D_GNU_SOURCE -I/usr/include/mysql -c -o res_config_mysql.o res_config_mysql.c res_config_mysql.c: In function `realtime_mysql':

hi all . i am facing a issue with centos recently : after every boot i receive the following message in terminal : > Sep 19 13:13:02 station2 kernel: irq 50: nobody cared (try booting with the "irqpoll" option) > Sep 19 13:13:02 station2 kernel: [<c044e6fa>] __report_bad_irq +0x2b/0x69 > Sep 19 13:13:02 station2 kernel: [<c044e8e7>] note_interrupt +0x1af/0x1e8

Hi all, I have installed a TE110P in a BOX but when I load zaptel module I can't see any device in /proc/zaptel. And led of the card is green. My zaptel.conf is the next: span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=es defaultzone=es and cat /proc/pci throguh next: PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel Corp. 82845 845

Hello I just installed a TE110P in a Dell Poweredge 750 (rackmount), which is connected via crossover T1 cable to a adit 600. Anyway, I've encountered an array of errors, which I believe I have narrowed down to the 22 IRQ misses I encounter on zttool. I've noticed that the te110p and the usb device share an IRQ. Could that be the source of my woes? Would disabling the usb device in the

My Samba server is a new install of Ubuntu 10.4 x86 with Samba 3.4.7. Samba is configured as standalone, and shares only a single directory /data for backup purposes. I stumbled across this issue while trying to get my original problem fixed (which I did, thanks to this helpful list.) Run the following in a temporary directory: echo abc > ActivePerl-5.10.1.1007-MSWin32-x86-291969.msi

Hi there, I use Ubuntu 7.10 with Gnome and want to run Litlink V.3 (http://www.lit-link.ch/) under Wine. The installation is no problem but the program doesn't start properly. It opens and I can see the start screen but than it freezes. I get the following messages when I try to start via terminal : ALSA lib conf.c:3949:(snd_config_expand) Unknown parameters 0 ALSA lib

Hi all, We have been using SuSE7.2 and samba (client and server) without any problems for a few months. Now, we migrated some workstations (samba clients) to SuSE8.0 and we get segfaults while accessing files mounted through samba. The segfault happens on the CLIENT side. Here is our network configuration: - SuSE7.2 server with default samba server package. - Few SuSE7.2 workstations

CentOS 4.3 (fully updated, including CentOS Plus kernel). Running KDE 3.5.2 (fully updated from redhat.kde repo). I can't seem to get the OS to recognize my SD card when inserted into my USB card reader. Mepis 6 Beta 3 has no problem with it. DMESG sees nothing happening when the card is inserted. USB-STORAGE module is loaded.