similar to: VoIP QoS with PIX

Hi, I asked this last week but i didn't get any answer So i will elaborate on my question. I need to setup a pix 515 firewall (running 7.2.2 OS) to allow sip traffic thru it from a sip phone wherever i may be. The pix is where all my servers are colocated and i will need to connect thru it from softphones / hardphones wherever i happen to be traveling. I need help setting up the pix for

I've got multiple satellite office all linked back to the main office via VPN. Each office has their own asterisk server which registers back to the main office's Asterisk server. Each office also has a 1Mb downstream / 384k - 768k upstream connection. The branches are using Speex for their connections back to the main office. The issue I'm having is that there are times that

Hello, I am not too familiar with the settings in our PIX (learning though). Here is the only access-list setting that we have in place for Asterisk: access-list acl-prod permit udp any host EXTERNAL_*_IP_HERE eq 5060 In rtp.conf we are allowing ports 10000 - 20000. We are not using SIP Fixup in our PIX due to firmware version. How do I go about adding the ability for udp ports 10000 - 20000

does anyone have a sip working through a cisco pix firewall? i can get the phone to register and the call to be negotiated, but as soon as the call is answered there is no sound and the call ends immediately. im sure this is due to the RTP negotiation being rejected by the pix. any helpful ways around this? right now my only solution is to put a small box outside the firewall and IAX the

hey friends, I am looking for a free open source software (web based or application) through which I can monitor the Pix Firewall. What it should show Interface status or traffic , VPN Connectivity status, CPU Status, Memory Status etc. I am also running DHCP server on Pix Firewall (due to some reasons) If it can monitor that also means showing how many IPAddresses has been assigned, to whom,

Hi, I have about 10 Cisco 7960s behind a PIX 506E (IOS v6.3) firewall. After some period of time, asterisk says that some of them are unreachable, and the phones lose their registration. The only way to make the phones recover is to clear the NAT translation tables for the phones on the PIX (clear xlate...) Does anyone know how to fix this? As you can imagine, it is quite annoying. And it does not

I cannot get incoming calls to sip phones behind a PIX to work, outgoing is fine. Asterisk (Public IP) --> Internet --> PIX (NAT) --> Sip Phones I have tried no fixup protocol sip, I have punched a hole in the Pix allowing anything from the Asterisk box into the network, still no incoming. I have done all the Wiki suggests in regarding to NAT. Is their a trick getting the

Hi, I have the Cisco PIX 506 firewall right in front of the asterisk and I am getting a one-way audio. I need your help/guidance to resolve this problem. I have the "fixups" disabled for SIP in the Cisco PIX 506. Any help rendered by you in this subject is greatly appreciated. I have been breaking my head trying to resolve this problem for more than one month. I have included the

Can anyone point me in a good direction for configuring SIP through a PIX using 1:1 NAT. I have read anything I could get my hands on and tried them all with very little success. I can get it to work through the cheap little cable modem routers, but not this PIX. I -can- make a direct SIP call using the IP address of the * server (ie.exten@ipaddr), but when I do that * still doesn't

Is there anything special that anyone here has had to do to get an Aastra phone (on the Internet) to talk to Asterisk behind a PIX firewall? Ports 10000-20000 UDP are open on the PIX and forwarding to the Asterisk server. The Asterisk server's RTP.CONF is set to use 10000-20000. The phone registers, and will place AND receive calls, however, no audio is passed. The phone is an Aastra

Hey Everyone, We are in the works of planning a new * installation for our company. We have 20 users in our main office and 5 users in a remote office a couple of states away. Our call volume for the main office will be anywhere from 5-10 concurrent calls. The remote office will have about 3 heavy users with two users making calls occasionally. Right now we have an existing PBX. We have a

Hey All, Sometimes we are running into issues with calls randomly being disconnected. We have a couple of phones is in a remote office. We have a PIX-to-PIX VPN setup between the offices. I know neither of these devices provide QOS but we usually don't run into any problems. I notice this problem when we are in a conference call with one of the employees at the remote office and a

Hi everyone, I'm very new to all this, so please forgive me if I have the terminology mixed-up. We are preparing to install an Asterisk IP PBX over the weekend and I have an issue with the Polycom SP 500 phones we are trying to use. My problem is regarding DHCP. Our DHCP server is our Cisco PIX 501 firewall. I've specified option 66 and the phones connect to the FTP server

Hi, I am the network administrator of my company, I know quite well Windows networking and a few about Linux and its amazing routing and QOS capabilities. Right now, we have a bustable T1, which mean that the bill increase with out T1 use. I have decided to find a way to shape the traffic so I can stay at a raisonable speed of 256 kb/s (Up/down) on my T1. I have linux gateway with 2 nics behind a

Does Kid Pix Studio Deluxe run under Wine? An elementary school I visited recently was running that program on all their Windows machines, and wouldn't consider switching to Linux unless it was supported. winehq.com doesn't resolve in DNS for me tonight :-( so I can't check the database. I don't have a copy myself, so I can't test it personally. (Hmm, maybe I should get

Anyone got a resource on setting up a CentOS box to connect to a Cisco PIX 5xx VPN using IPSec? I don't know if it matters but an important part of functionality would be split tunneling, I need to maintain that from the windows side of functionality. Thanks! jlc

I'm wondering if anyone knows of ISPs with service that has QoS features that would be good to use with VoIP stuff. Granted, the QoS would only be supported as long as you stayed within their network, but it might be better than nothing. --Eric

Hi! I have some problem in my asterisk 1.4.2, I've installed it on centOS 5.2 and this didn't accept voip QoS and can't route the packets having voip QoS. So I should change voip packets to be routing with centOS. I want to use iproute2 but i don't what to do after installing iproute2. Anyone could help me please? -------------- next part -------------- An HTML attachment was

Hello, I'm searching for a router for our company. Does anybody has a suggestion for a router with a SIP Application Layer Gateway and good working QoS (Upstream AND Downstream). Regards Bastian

Hi, I'm looking for opinions on the "best value" router to use for home offices. It should work for a scenario in which there are 3 computers and 2 SIP phones, handling QoS so that the phones always have higher priority traffic than the PCs. (and not rely on the phones to do the QoS because some PCs may not be connected to the phones). QoS could be based on destination and source