similar to: Asterisk@home with Wildcard TDM400P card.

Hi all, I've been all over the Asterisk@home site and all through the configs, and I can't find how to create extensions that will use the zap channel. Sip phones I can find, but no way to assign a extension number to the phone I plug into the TDM400P card. Am I just missing something?

Hi all, I have been experimenting with getting the Asterisk@Home 0.3.iso to see the Wildcard TDM400P card. I can see card being probed in the start up, but fails (most likely due to my having the FXO/FXS mods in the wrong place), when I try to modprob the card it flunks, but ztcfg -vv see's the card, but complains about the signaling being set wrong, again FXO/FXS mods may be out of

I'm looking to add a single FXO port to my Asterisk box. It looks like my options are a Digium Wildcard X100P off eBay for $6.99, or a Wildcard TDM400P with an FXO Module from Digium for $125. Can anyone explain the tradeoffs (other than the ability to put 4 FXO/FSO modules on the TDM400P). What about RTC for the system - I know the TDM400P provides it. Does the X100P? Thanks!

Hi; I'm trying to connect a TDM400P with an FXS module to a Valcom V-9940 Paging adaptor. This port on the TDM400P was connected to a 2500 Set and was working I just re-connected it to the Valcom (which is known to work on a Telco POTS line) and its not picking up. The Valcom docs say it need a minimum of 75 Volts at 20-30 Hz to recognize a call... So the question is what ring voltage

I recently plugged in Phone to my TDM400P Card to test out something I mostly use sip phones to interface with *. All of sudden I'm getting lot of line static noise coming of the card is there any settings I should look at or anything I need to do on the command line at this point I'm open to any ideas I'm running 0.7.1 on Redhat 9.0 machine. Any insight would be greatly appreciated.

Hi, after finally getting my testsystem to work well I'm planning to buy some hardware. Now I was wondering what the advantages / disadvantages of using a Wildcard TDM400P solution over using real sip phones like the snoms is? The only thing I came up with is that the Snoms can use a LDAP adressbook on the server. What about calling a sip adress like person@server.com. Can this be done by

We have a client that has a single Wildcard TDM400P with 3 FXO ports on Asterisk 1.0.7. Occasionally the system seems to loose its mind and starts originating calls from that Zap channels that don't exist. The receptionist picks up the phone and nobody is there. This can happen repeatedly over and over again within a few minutes. As far as we can tell these are definitely not real calls as

Hi, I'm no phone guy but I've been having quite a bit of fun messing with Asterisk. I just unwrapped my new Wildcard TDM400P (TDM40B) which is the new 4 port FXS PCI card. It has 4 RJ45 connectors and I'd like to hookup 4 regular phones which are RJ11. If I crip RJ45 connectors to the phone cords do I simple use the center two pins (pins 4 and 5)? Thanks, Randy Smith Tiger

I've just moved into 3.3v PCI servers and found that my clone X100P cards were lying about the 3.3v supported notch. Can I use a Wildcard TDM400P without any modules as a timer for MeetMe in a 64 bit 3.3v server? Will I still need to plug the hard disk power cable into it? Is there a better cheaper 3.3v MeetMe timer? (Boss doesn't trust the kernel timer.) -HJC

I think I have a bad FXS module on my TDM400P. Channel map: >> >> Channel 01: FXO Kewlstart (Default) (Slaves: 01) >> Channel 02: FXS Kewlstart (Default) (Slaves: 02) >> >> 2 channels configured. >> ZT_CHANCONFIG failed on channel 1: No such device or address (6) The zaptel loads ok, but the wctdm reports No such device or address and stays loaded. The

Hi, Everybody, I can modprobe TDM400P card without feeding power supply , so what is the purpose of providing power supply in that card. Can any body tell me Regards Lokesh Portugal mail -lokeshkumar80@yahoo.co.in ____________________________________________________ Send a rakhi to your brother, buy gifts and win attractive prizes. Log on to http://in.promos.yahoo.com/rakhi/index.html

Hi! I have just bought the X100P and TDM400P cards to install on my computer to implement the PBX. I also downloaded the newest softwares asterisk_ver0.5.0, libpri_ver0.4.0, and zaptel_ver0.7.0) to install on my computer (Red Hat Linux 8.0). All packages are compiled well. When I use "modprobe" to load drivers (modprobe zaptel, modprobe wcfxo, modprobe wcfxs), the first two (zaptel,

Hi all I want to install a TDM400P card. I use fedora core 4 and the version of my kernel is 2.6.11-1.1369_FC4smp. When i type lspci, i have this message: 02:01.0 Network controller: Unknown device e159:0001 how can i fix this problem? Thanks for your help! Serge MESSA OVONO --------------------------------- Yahoo! Mail r?invente le mail !

I have a TDM400p with 3 FXS mods and 1 FXO mod. I have all set up with what seems to be correct settings (according to digium and asterisk wiki). As soon as I plug in my POTS line into FXO mod the line goes into offhook state (whether I have power to the card or not). Should this happen? When I try to call * box all I get is busy signal. I've installed stable version, cvs version, change

I am having problems getting a Nicherons TDM400P wildcard clone to dial out. Everything appears to be configured correctly, but although I see call progress, it never seems to actually pick up the phone. (The following is a test of 911 emergency, where I substitute 811 [repair service] as the actual number dialed.) *CLI> -- Executing [911 at from-internal:1]

<div><BR>Hello,</div> <div>&nbsp;I bought a TDM400P, and intended to use it with my analog phone, which is RJ11 ofcourse. So, the question now, how do I plug in my RJ11 phone to the TDM400P card, which has an RJ45 interface? Also, since it's an 11B card, I also intend to bring in an analog line into the RJ45, so i am still left with the same question....how do I go

Hi... Actually, I have to digium cards install on my server running asterisk. They are X101P and TDM400P. Right now, X101P is running perfectly, but the another card doesn't work. In fact, it is not reconized by the server. When I try to load wcfxs.o it shows me the following message: /lib/modules/2.4.18-14/misc/wcfxs.o: init_module: No such device Hint: insmod errors can be caused by

We are experiencing problems with FXO modules on TDM400P. From time to time they stop responding to incoming rings although they work fine if we use them to dial out. It's been verified at least in two different installations (using different mainboards) in two different locations. The only solution to the problem is to stop asterisk, then unload and reload kernel drivers. The problem appears

Hello. All. I am a bit new to asterisk, started from half a month ago. I am setting up a home asterisk server with analog card. I am using asterisk 1.4.27. At the moment, I bought a X100P card and installed it on my computer. I used it to connect my home phone line. For the moment, it works fine when dial in. Soon I noticed when I dial out through it to my mobile, it can't hang up

Hi Folks, Does anybody have experiences with plugging 3 TDM400P cards in one PC?? I think about a Asterisk box handling 8 incoming analogue lines and providing 4 lines to an old analogue PBX. I read a lot about trouble with the TDM400P cards so this idea seams to be not really god, or? Ciao Joerg -- _____________________ Don't PANIC