similar to: DTMF digit dropping

Until recently, I was using Broadvoice for my in/out calling thru Asterisk. I was extremely pleased to see that Broadvoice was actually passing the callerid info (number and text) that I had set up on each device in my SIP.CONF file. I had PSTN users tell me that they were actually seeing name and extension info when I called them from the Asterisk box. Last week, due to numerous user quality

I'm having a very annoying problem with access my asterisk system from work. Our phone system here only produces very very short DTMF tones. The phones work fine for other IVR systems (Dell Support, HP Support, etc, etc). However, tones to Asterisk just never make it. The way I'm calling into my Asterisk server is such: OFFICE PHONE => CALLUK.COM 0870 => IAX Inbound The

I have a couple of DID's with LiveVoip and am having major DTMF issues on incoming calls. I am connecting to them through IAX using ULAW. When someone dials one of these DD's (from a landline) they are for the most part unable to navigate the IVR menu successfuly. I would say the failure rate is greater than 80%. For example if the caller presses 5 sometimes * will see the DTMF as 55 or

Need to replace our older soho fax machine with something more current. Would like to run the fax line through *, but haven't been able to make spandsp work correctly with digium TDM04b card. Our fax volume is very low (maybe a few per week), but we have multiple offices in three geographic locations and would like to be able to email the images to the correct location. For planning purposes,

I have working SIP numbers with broadvoice, and just added a DID from http://connect.voicepulse.com/ . The calls answer, but DTMF is not recognized. With "iax2 debug" active pressing DTMF does nothing. Zilch. Zero. A friend tried a different IAX2 connection, and got the same results. I see the following in the archives: On Fri, 2004-04-09 at 10:12, Robert Jackson wrote: > Hey

Hi, I am thinking of signing up with voice pulse connect to connect to my asterisk server and using it as a regular line. Is it good? Or should I go with vonage or others ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050124/16792f10/attachment.htm

I have a couple of DID's through VP Connect and have been having sound quality issues on incoming calls. During the call, the calling parties voice sometimes sound like it is crackling, in other words it is not very crisp. I would liken it to listening to a radio with a blown speaker. This sound defect comes and goes throughout the call. The other person is always audible but it just isn't

If this has been covered before - I appologize. We use some Sipura SPA-2000's with the g711 codec and all seems fine (except for the occasional failure to register errors in my asterisk logs - but I will save that for another post). g711 call quality is on par with our Cisco 7960's. However, when using the g729 codec, the call quality on the Sipura device goes downhill on the PSTN side

Does anyone have any experience with iax.cc/sixtel? Are they a legitimate company? From their website it looks like you can get a private incoming 800 number for 30 cents/month plus 2 cents/minute. Somehow that pricing seems a little cheap for a DID number. I assume there has to be some minimum usage or something. Any info as far as actual costs and/or voice quality would be appreciated.

Hi all, I use a GSM device to send dtmf on my asterisk system (via SIP). the codec I use is ulaw (or a-law). dtmf mode is INBAND. relaxmode is on. but most of the case, I 'missed' some DTMF or I 'double' one. as anybody as seen this before? is there any way to prevent this thanks

Two cvs-head asterisk boxes with iax2 working fine (without register statements). When two calls are placed simultanously from system A -> B and the packets are sniffed on the wire, I see the two calls using two different udp packets. At the top of iax.conf I have trunk=yes and jitterbuffer=yes (at both ends). I was expecting to see both calls handled within a single udp packet, but

Asterisk Users, Has anybody use Voicepulse Connect for Asterisk? I am trying to cover all my bases because in the past, I got burned with poor quality of service, along with failed DTMF tones with 3 different SIP Providers (Vitelity, Broadvoice, and Teliax). I am running Asterisk 1.2.13 on the Debian Etch system, using the SIP protocol. Any insights would be great. Thanks. -John

Is there anyone out there who has VoicePulse Connect working with DTMF? I've been unable to get it to work from the start, and the recent VoicePulse updates did not help. A caller to my DID's hears Asterisk, but pressing DTMF does nothing: On call setup "iax2 debug" shows: ----------------- Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: ACK

Which would you recommend as far and quality and pricing to connect to asterisk (including DTMF issues)/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050125/bf7bf081/attachment.htm

I am thinking of dumping broadvoice so I need some other VoIP providers that have a las vegas DID and a service better than broadvoice. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050131/bf4b1c31/attachment.htm

Hey there, I don't know who else has suffered broadvoices terrible service, but I am about to my end with them. The lack of a LBR codec, the outages, the changing of servers without notifying subscribers haspushed me to my end. Now most incoming calls are abbruptly cut off within a minute of the call starting. Anyone know of any other * friendly providers that have DID, besides Voicepulse,

I recently switched from BroadVoice to VoicePulse Connect on my Asterisk box. Too many Meetme quality complaints (whether real or perceived). I had to make a choice to use IAX2 or SIP with VoicePulse. I first tried to go with SIP because I already had it working and all of our devices are SIP. Problem is that every time I turn my back, the Asterisk registration with the VoicePulse SIP server

Can someone give me a clue as to why I keep hearing DTMF type beeps on my phone calls. It sounds exactly like someone on the other end is pushing a key on their phone but they are not! Has anyone ever heard of this before? It use to happen once in a while, today it's been happening a LOT and it's driving me batty.. -- Start Your Own ISP! http://www.YourOwnISP.com

I've been looking for a good iax or sip <==> ptsn provider. Someone with very low cost usa calling and can offer incoming ptsn connections in most markets. The only decent providers I could find were iconnecthere and nufone. Has anyone found someone that really stood out? Matt Hohman New Heights Church http://www.newheights.org 7913 NE 58th Ave. Vancouver, WA 98665 Office:

We are trying to determine how to build out an IVR system we are working on. The system needs to be able to handle probably at most 5-10 concurrent calls at peak times. Other times we are just looking for a reliable service. For incoming calls we've been using BroadVoice VOIP and before that VoicePulse VOIP. VoicePulse's IAX service started dropping DTMF inputs that we were processing