similar to: Asterisk Dial Out Issues - POTS Line

Here's a possible bug, or more likely, I'm just missing something. We have a pots card in one of our asterisk boxes. Its a simple asterisk setup with one FXO/FXS card and basic static extensions file, etc. When we dial out over the pots line, 4 out of 5 times, it will work. However, every 4 or 5 times, we get an error back from the provider that says "The number you have dialed.....

Hello All, I'm trying to dial out with no luck. I'm using Asterisk@Home defaults. I have one X100P card and SJPhone. *CLI> dial 96985628 No such extension '96985628' in context 'default' Here is my exten [trunklocal] ; ; Local seven-digit dialing accessed through trunk interface ; exten => _9NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) exten =>

I had to return my TDM11B because it put the PSTN line 'off hook' the moment I plugged it in and wouldn't hang it up. The new card seems to work because I can actually make an outgoing call from the FXO port to my cell phone, so I'm pretty happy about that. But Asterisk doesn't recognize incoming calls from the PSTN. If I dial my home phone from my cell phone asterisk

Hi list, i've problems with my * server and the 4 phones which are linked to it. i've 2 grandstream bt100 with the firmware upgraded to 101, a wi-fi phone (i don't know its brand) and another ip phone i don't know its brand. with this sip.conf : [general] port = 5060 bindaddr = 192.168.100.229 context = default ;x changed from default to sip localnet = 192.168.100.0/24

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

Howdy, My first forray into using res_mysql.conf for realtime access of sip users and extensions. I have the following relevant section of extensions.conf: --- [trunklocal] exten => _NXXXXXX,1,Dial(${GLOBAL(TRUNK)}/${EXTEN:${GLOBAL(TRUNKMSD)}}) [local] include => trunklocal include => trunktollfree [longdistance] include => local include => trunkld [international] include

I'm trying to add an emergency dial to my context. However, when I try to dial it, I get caught in an endless loop. For debugging, I have pared out nearly all the control flow and just have ChanIsAvail() and Dial() called. Using two different extensions to call teh same number, I get two different actions by *. Here is the vvverbose output: -- Starting simple switch on

Hey all, I'm pretty new to Asterisk and VoIP in general, so I'm hoping I can get a bit of help here. First I'll explain my setup, and then my problem. Right now I have a Cisco 3640 with a VIC2FXO card in it which has 2 FXO ports. I have an analog phone line plugged into the first port (voice-port 1/0/0). I've got it setup so that calls coming into that analog line are

I have a setup of 3 Cisco 7940 running Sip image 6.3. All these phone are registered by the below information *CLI> sip show peers Name/username Host Mask Port Status 2002/2002 192.168.22.199 (D) 255.255.255.255 5060 Unmonitored 2001/2001 192.168.22.200 (D) 255.255.255.255 5060 Unmonitored 2000/2000 192.168.22.198 (D)

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

I want to include a new context in my exensions.conf I have read this page http://www.voip-info.org/wiki-Asterisk+howto+dial+plan and I can sort of follow it?! I have a context [local] that I know zapata.conf points to, I have edited extensions.conf and put in my phone, sip and iax extensions. I want to add an sms context. I understand that all calls go through my [local] context and I have

hi do u have the sip phones extensions in the extension.conf and are they in the right context (sip-incoming)??? are the sip phone registering to asterisk?? try stop asterisk and reconnect as asterisk -vvvvvvvc to check see them registering... ________________________________ From: asterisk-users-bounces@lists.digium.com on behalf of Sistemista WebSolvingJaa Sent: Fri 7/1/2005 6:43 PM

A call comes in from the PSTN, Asterisk answers it, it goes to the directory, and then to the extension the caller designates and the user at that extension answers. The user at the extension then wants to transfer the call to another extension; on the Cisco 7940 they push the ?more? soft key, then the ?Transfer? soft key, then enter the extension number they want to transfer to, and hit the

Now that I actually try and google for it, I can't find any dual mode GSM/DECT handsets, only pages telling me that they exist without any actual information!!! Does anyone know of any such handsets? (and even better, ones that are available in Australia) I've searched a few of the major gsm manufacturers (nokia, Panasonic, sonyericsson) but their web sites are absolutely pathetic to the

Does anyone kmow what these errors mean or how they can be fixed. I'm using asterisk on a Fedora Core 2 box with a TDM400P with 2 fxo and 2 fxs ports. Dec 29 17:17:52 WARNING[6019]: chan_zap.c:5469 ss_thread: Channel Zap/4-1 in prering state, but I have nothing to do. Terminating simple switch, should be restarted by the actual ring. -- Hungup 'Zap/4-1' == Starting post

Hi List, we are using openh323 gatekeeper for voip telefony. We also have a voip over ss7 TELES Switch for voip into POSTN Network. Know we want to use Asterisk for converting SIP to h323. Now my question. Is Asterisk an full h323 gatekeeper like openh323? Do we need openh323 GK for astrerisk, too?. And how can i tell asterisk to sent all none SIP-ip calls to the gatekeeper over h323? thx

I am using version: CVS-v1-0-12/13/04-18:46:23 with a TDM400p (2 fxo, 2 fxs ports) and I keep getting errors along with phantom calls: Dec 21 16:02:07 NOTICE[5872]: chan_zap.c:5363 ss_thread: Got event 17 (Polarity Reversal)... Dec 21 16:02:14 WARNING[5872]: chan_zap.c:5434 ss_thread: CallerID returned with error on channel 'Zap/4-1' my analog phone reads caller ID info fine when

Hi, I have been trying to workout how to use the call pickup. So Far, I have the following in zapata.conf [channels] signalling => fxo_ks context => local pickupgroup=1 callgroup=1 channel => 1-3 When I dial *8# all I hear is busy tone. What have I missed? thanks Jay.