similar to: FX CallerID

Hello all, We are looking for some hardware requirements/recommendations to be able to handle a full DS3's worth of TDM -> VoIP traffic. The DS3 would bring 24 calls per T1 x 28 T1s = 672 simultaneous calls. We would then need to convert those calls into G729 SIP VoIP calls to send to our asterisk box over ethernet. Since everything is going in/out of asterisk is 729, and no features

I don't want to start the "How many calls can Asterisk handle?" discussion or "How many angels can stand on the point of a pin?" discussion either. But can anyone contribute some practical knowledge of systems that take in channel bank T1s or DS3s from "far away", and process the calls? I am looking for real world, been there, done that, or "check the

Hello Everyone, We are looking to interconnect with a local ILEC over an OC-n transport layer. They basically gave us two options in terms of mapping the SONET to the DS3: * VT1.5s mapping * DS1s mapping The second option is quite clear. We would MUX the connection, and plug the lines into qaud t1 cads etc... The tech mentioned that with the second option we would also need a DACS to convert

Hi All, We are trying to implement a DS3 capacity calls (672 concurrent calls) using asterisk server. I wanted to ask are there any compatible DS3 cards with asterisk? I tried searching a lot but could find DS3000P from digium but unable to get this product. Does anybody have any idea of having any DS3 card in asterisk box so as to handle around 600 calls? Thanks Sandesh -------------- next part

Obviously, there are no DS3 TDM cards that are currently compatible with Zap channels. (or are there?) Does anyone know of an inexpensive DS3 card that could perhaps be used with Asterisk if one were to try to port the Zap drivers to such a card? PCI, of course, would be the bus of choice. I think there are quite a few discouraging comments to be made on that question. Firstly, most

Ok, I'm working on an implementation of Asterisk to service approximately 50 fractional (read: timeshare) residences. Basically what I'm starting with is a hotel phone system, but with additional functionality that Asterisk can provide. From the end user's perspective, I want the exact same functionality as the Telco provides (Caller ID, visual message waiting, etc) with a few

I have a customer installation with an Adtran DS3 mux. The DS1's go into my Asterisk servers that run IVR/Call recorders. The DS3 provider is Qwest, and they tell me that they routinely drop the DS3 service to redundant back-up's and that this is a common practice that happens thousands of times to DS3 lines daily across the US without any service interruptions. They say that the

Hi! Is there anyone that are using a E1-channelbank and have any tips about some type? Im looking at the TE410P and use one port for a PRI (Euro-ISDN, I think we're using some slightly modified version here in Sweden, but I'll check that tomorrow) and connect one port to a channelbank for 30 analogue telephones. It would also be great to get callerid on the analogue phones, so it would

Any know what Digium hasn't released the DS3 card? It was supposed to be out a while ago. -Matt

Good morning, I have a digium wctdm24xxp in my asterisk box, i am not able to see the callerid when the call is incoming from the fxo line, i live in Brazil, how can i change the signaling from fsk to dtmf? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL:

At the risk of being flamed.... Has anyone had any success get the 'El cheapo' Wildcard W100P clone's (?20 flavour) to work with UK Caller ID? I'm not sure what the status of Asterisk 1.6 is with respect to UK caller ID, being that we have an odd method of sending the FSK ahead of the ring, but I'm guessing I can't be the first to ask this? Keeping in mind that cost is

Thanks a lot for help in advance. I am switching from matlab to R and I guess I need some time to get rolling. I was wondering why this code : > fit.0 <- lm( Response ~ 1, data = ds3) > step(fit.0,scope=list(upper=~.,lower=~1),data=ds3) Start: AIC= -32.66 Response ~ 1 Call: lm(formula = Response ~ 1, data = ds3) Coefficients: (Intercept) 1.301 is not working

BJ, >BJ Weschke <bweschke@gmail.com> >Subject: Re: [Asterisk-Users] Do Both! :) Re: Telecom >SIP termination vs. DS3 >To: Asterisk Users Mailing List - Non-Commercial >Discussion <asterisk-users@lists.digium.com> >Message-ID: <79cf63305051908056c284cc9@mail.gmail.com> >Content-Type: text/plain; charset=ISO-8859-1 >Did I miss pricing/availability

Greetings!! We're getting some strange results using call files.. no matter the technology, DAHDI, SIP, etc., we get a "Call failed to go through, reason (3) Remote end Ringing" message when attempting to originate a call from a call file. Numbers changed to protect the innocent.... using call file.... //------------CALL FILE------------// Channel: DAHDI/g1/918005551212

Message: 16 Date: Thu, 19 May 2005 00:16:34 -0600 Michael, Do both! As for Sip Termination: ----------------------- Contact Kristi Eggers @ Txlink.net for month to month Originating/Termination VoIP Toll Free or Local USA DID #s. Yes they do both Sip and IAX. You must have seperate accounts for either Sip or IAX and fund your account with a minimum of $100. This is what I did. Once I get

Hi, Using 1.4.26.1 & DAHDI 2.2.0.2, FSK VMWI devices off a TDM840 work fine. With 1.6.1.[45] & same DAHDI, instead of the FSK spill I get a line polarity reversal. Stutter dialtone is generated as expected. Has anyone else seen this? Is there anything special I need to do for 1.6.1 to make FSK MWI work? Thanks, --Barry

Hello, The company I work for recently purchased 2 Rhino CB24s and a Rhino PCI-E R4T1. The channel banks are plugged into the R4T1, as well as 2 PRIs from our telco. The CB24s are for all internal analog phones. Most of the phones are setup in "batphone mode", which is "immediate=on" in the DAHDI config. They are set up this way because we are an outgoing call

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

Hi, Not sure if this is a PBKAC or not:- root at ds3:/usr/share/postfixadmin# doveadm pw -s SHA512-CRYPT -p password {SHA512-CRYPT}$6$aUgGXP0UshkMj7hY$9JV4yMRsjIe/98CzmglYrMjf.9NJ.FXzxcLE9B0v3doCRUWo2wRncc6hg6VCs0DCUHQbeC/bRDZdGCge/nB/h/ root at ds3:/usr/share/postfixadmin# doveadm pw -t

Hello, All :) Regarding to incoming caller ID on PSTN line, which one is best supported by asterisk: is it FSK ETSI or FSK US? I bought some caller ID converter hardware (convert DTMF to FSK and vice versa) but still asterisk can not detect it. The converter has a switch FSK ETSI or FSK US This is what I put in /etc/asterisk/chan_dahdi.conf ... cidsignalling=bell cidstart=ring ... If after