similar to: Multiple Host IP connections per peer

On Tue, Apr 14, 2015 at 08:26:07AM +0200, Sebastian Kemper wrote: > On Thu, Apr 02, 2015 at 11:33:38PM +0200, Daniel Heckl wrote: > > I do not want set allowguest=yes. The problem is, there is no official > > list with ip addresses of Telekom Germany. But I think all ip > > addresses comes from the ip range 217.0.0.0/13. > > Hello Daniel, > > Judging by the lists

Hello List, I need your advise please. I am trying to establish a call from Asterisk 1.8.15-cert5 to one remote SIP UA (not Asterisk), both are behind NAT. That remote peer is configured with nat=yes in my sip.conf but yet RTP packets are being sent to its internal IP address which is declared in the Connection Information (c) in the SDP, obviously reaching nowhere. I need RTP to be sent to the

Hello List, I need your advise please. I am trying to establish a call from Asterisk 1.8.15-cert5 to one remote SIP UA (not Asterisk), both are behind NAT. That remote peer is configured with nat=yes in my sip.conf but yet RTP packets are being sent to its internal IP address which is declared in the Connection Information (c) in the SDP, obviously reaching nowhere. I need RTP to be sent to the

Hi all, I'm running Asterisk SVN-trunk-r8643M and face following problem: I'm trying to get incoming call from a provider and calls ended with a 404 error. On the INVITE I get "Found no matching peer or user for <IP address>:5060" and then "Looking for <UserName> in <SIP default context> (domain xxx.xxx.xxx.xxx)". My question is why asterisk

Hello, I'm quite sure this question has already be asked previously but before diving into it with a lab setup, I would like to re-ask here the thereafter question. I've got a bunch of very old Asterisk boxes (lastest Asterisk version is 1.6.1.X), all belonging to the same network, I would like to centralize on a single Asterisk instance on a brand new box. This instance will be powered

Well, I thought it worked, but it actually doesn't--I am able to get the caller pick up the phone, but for some reason, I cannot hear anything on either side no matter who does the calling. Again, my two SIP phones are on the local 192.168.1.0/24 network (do not go over the Internet) and the Asterisk server is located in the same network (not accessed over the Internet). Any help is

Hi All, I am doing some testing with the asterisk server and have been monitoring the packets exchanged during a SIP-ZAPTEL phone call. I see that the IP-ID in all of the RTP/UDP/IP packets are set to zero. After some googling, I have learnt that some of the linux implementations set the IP-ID to 0 (if the DF bit is set in the IP header) if the two hosts exchanging data are on the same subnet.

I do not want set allowguest=yes. The problem is, there is no official list with ip addresses of Telekom Germany. But I think all ip addresses comes from the ip range 217.0.0.0/13. I have now the following addition to sip.conf. I think it is the only safe option. Or what would you say? [telekom](!) context=from-trunk type=peer defaultuser= authuser= remotesecret= fromdomain=tel.t-online.de

On Tue, Apr 14, 2015 at 09:38:22AM +0200, Daniel Heckl wrote: > Sebastian, > > Your code sounds good, I'm curious how it goes on. > > First the linux machine had the Google Public DNS 8.8.8.8 as DNS > server. After I changed it to the via PPPoE assigned DNS servers, i > had no changes any more. But we should be prepared for changes. > > You must enable the dnsmgr.

On Sun, Dec 21, 2014 at 4:54 AM, Recursive <lists at binarus.de> wrote: > Dear list, > > I am currently trying to send faxes via T.38 using PJSIP (newest version 2.3) with Asterisk 13.0.2. After having configured PJSIP, I have seen several things the cause of which I would like to know. > > 1) Ports and IP addresses which PJSIP bind to > > I have configured one transport

Hey, We have asterisk 1.2.4 (old I know) with a couple of snom phones, a couple of grandstream phones and around 65 philips dect stations. Now the problem: All calls do peer to peer RTP except the calls from dect station to dect station. snom to dect or dect to snom do peer to peer. So the sip config looks fine because all the 'static deskphones' honor the REINVITE and start talking to

Folks, Apologies ahead of time if this has already been asked (read the list for the last month looking for something similar). I have been trying to get the Background command to work with no joy yet. Here is what I am trying to do: 1. Answer the call. 2. Play the message in the background, while waiting on DTMF from user. 3. If I get a "1", then interrupt the message and dial the

Hello, I'd appreciate your comments on the following problem I'm having, please forgive me if this is something obvious, I've been scratching my head on this for a while: I have Asterisk+Kamailio setup where I'm currently testing inbound calls from outside. I have both webrtc and sip clients, where webrtc peers are defined according to sip.js instructions (

I don't believe tinc will support this level of access control. As far as I can tell, it's all or nothing with tinc. How you configure firewalls on the other hand is up to you. On Tue, Oct 2, 2018 at 4:40 PM Michael Munger <mj at hph.io> wrote: > > Problem I want to solve: > > We have 3 sites: A, B, and C. > > Network admins should have access to all three. (this

Hello, When i have a "Hangup" in my dialplan (extensions.conf) the RFC says to terminate the session is to send a BYE request to UA. After tracing the traffic on port 5060 UDP i recognized that my asterisk is NOT sending a BYE request to it's peer, so the peer doen't know to end the session and continues to send RTP packages to me. Does anyone know how to fix this? Here's

That sounds like asterisk was working 100% correctly. If you receive an INVITE from an unknown IP address, then it should fail. Unless you want to allow anonymous, which is genearlly a very bad idea. If you are registering to IP X, but the provider may be transmitting invites from any number of other IP addresses, then you need a list of IP addresses, and have a trunk configuration set up for

Hi, We are seeing this on our Fedora Core 2 machine when accessing the share from a Windows 2003 box. Any help will be greatly appreciated. This is the smb.conf file : [global] smb passwd file = /etc/samba/smbpasswd passwd program = /usr/bin/passwd %u pam password change = yes obey pam restrictions = yes encrypt passwords = yes unix password sync = no

In a 1.2 release of asterisk, I've had no problem connecting to a Broadvoice SIP peer, to allow routing outgoing calls from Asterisk to Broadvoice. Now, with the same SIP configuration, I cannot establish the peer. I've enclosed a SIP log in the hope that someone can help me analyze this failure. I'd guess the issue is NAT related and wondering if someone can spot a problem in the

I have the following configuration and am obviously missing something small that is causing * not to work as expected. I have the following defined in sip.conf [ccme-in] type=peer host=10.0.9.1 context=devel_in disallow=all allow=alaw nat=no canreinvite=yes qualify=yes and [devel_in] is defined in extentions.conf However when I try to call via the dial peer I have configured on the cisco

Hi I have a weird issue with a new 1.6.2.17.2 box. At random intervals it just stops responding to RTP and signalling (both SIP and IAX observed). All calls in progress lose audio both ways although the console shows the call legs still in progress. No signalling can be sent or is received. It is as though the server drops of the net for those protocols. I can still navigate the console. Killing