similar to: can callgroup be used to ring a group of phones?

Hi list! I'm still trying to figure out about the groups in asterisk. If I understand correctly, if you assign a certain group number and you assign the same call group number to a sip device the device will reing even though you did not specifically specify it in extension.conf? How will this work for ISDN BRI/PRI? I don't want some extensions to get all calls from the BRI/PRI, just

Hi, I asked a time ago what were callgroup and pickup group used for. I have done some proofs and all, and I'm not sure if I have pick the idea up well!! That's what I understand: For example: group=1 callgroup =2 and pickupgroup=2 and my phone is a membership of the group 1. that's mean that when a phone that belong to group 2 is ringing, I'll be able to answer this call dialing

Greetings. I'm running asterisk here (elastix) and I have a few extensions configured in it. I have here two different callgroup/pickgroup where the extensions are configured in, but it doesn't work when I try do pickup a call. Looking the config file (sip_additional.conf) I see they are not configured with callgroup/pickgroup, the fields are empty. Manually inserting callgroup/pickgroup

I'm trying to set up asterisk so any phone connected to channel 1-16 of my Adit600 channel bank can pick up a call coming in on channel 24. I do not wish to ring any of the 16 channels on an incoming call -- this is strictly so I can pick up the line if I see it ringing and wish to answer at work. I have channel 24 in call group 3, and channels 1-16 in pickup groups 1 and 3. However

Hi list, Does anyone have any advice on the following: Incoming calls to our office come in on a SIP trunk. Since all our offices/desks are in close proximity, we would like just a single phone to ring when a call comes in instead of ringing every person's phone. Currently we've got this working by having all the phones in a callgroup/pickupgroup and incoming calls ring the

I have problems using the call pickup under Asterisk 1.8.4.2. I have another Asterisk with 1.6 - and it is working fine with the same settings. I have setup the same callgroup and pickupgroup for all extensions in sip.conf - just to make things simple for testing. The sequence *8 seems to be completely ignored by Asterisk - the client shows "Call answered" when dialing *8 while the

Setting up pick/callgroups really tightly is the way to go - one of our techs here does that all the time for clients. PaulH On Wed, 2007-06-20 at 20:51 +0930, Tom Lanyon wrote: > Hi list, > > Does anyone have any advice on the following: > > Incoming calls to our office come in on a SIP trunk. Since all our > offices/desks are in close proximity, we would like just a

Hi List, I have two Cisco ATA, one of them with two phones attached, and the other with just one phone. The ATA with two phones is behind a NAT, and Asterisk and the other ATA have public IP addresses. I can place and receive and blind transfer calls between them all. (Sometimes I loose registration from the ATA behind the NAT, but I think I have to upgrade to the latest firmware in the ATA) Now

Hello I have a Junghanns ISDN BRI card for incoming calls and use SIP Polycom IP300 phones. My config files look like this: features.conf pickupextn = *8 zapata.conf context=frompstnisdn group=1 callgroup=1 pickupgroup=1 I also edited sip.conf like this: group=1 callgroup=1 pickupgroup=1 But on internal and incoming calls if I dial *8 from any phone I cannot pickup. Do I need to add

Callgroups/pickupgroups are allocated per channel, not in the dialplan. sip.conf and zapata.conf are the two files you're interested in. -wade ---- Original Message ---- From: wipeout@linuxmail.org To: asterisk-users@lists.digium.com, Subject: RE: [Asterisk-Users] Using callgroups (was: Taking a call for someone elses extensionfrom my extension) Date: Sun, 20 Apr 2003 16:39:15 +0000

How is a callgroup used in the dial plan?? I can't see an example in the extensions.conf.. > See configs/sip.conf.samples search for pickupgroup > > RTFSC (Sample Configs) > > > Jeremy McNamara > > > > > WipeOut . wrote: > > >Is there a way to pickup a call whn using a SIP phone? > > > > > > > >> From

Hi all, at time i am trying to get a better idea of callgroups and pickupgroups (especially within the SIP Channel) A Pickupgroup is relative clear - everyone in the same pickupgroup may pickup a call And a callgroup does what ? - The same ? I thought that a callgroup would act like the ZAP groups - so that you then can dial SIP/g1 - and every SIP Client which is in the callgroup 1 does then

HI,ALL, I have multiple PSTN lines registered as multiple SIP channels (e.g. SIP/line1, SIP/line2, SIP/line3, etc...), on the multiple gateways( I uses the SIPURA3000). I wants to arrange them into an ordered hunting group for outbound calling. I used http://www.voip-info.org/wiki/view/hunt-dial+macro for reference. My configure files like blew.

Hello, I have set pickupgroup and callgroup for zap, sip and iax2 devices. Everything is working good with zap and sip and between these two. Iax2 pickupgroup and callgroup seems to be broken. I cannot pickup a call to IAX2 from SIP. Is there somewhere a bug ? I am running: Asterisk 1.2.9.1 Bartosz

Hi list! I have some sip phones and Sipura ATA 2000's. However after dialling a number I need to dial a # to control a device. When I dial # Asterisk kicks in and puts the call on hold. How can I change this? Thx!! Remco

Hello all, I'm trying to get "remote call pickup" (*8) working and I'm running into a bit of a problem. First the machine specs. This is a P4 2.66ghz w/ 512meg of RAM. I downloaded the CVS of asterisk on 04-16-2004, but I'll probably try to upgrade to the latest tomorrow. The machine has a T100P card and we are using channels 1-8 for voice, and 13-24 for data. The

HI All I've tried to do Call pickup /pickup group using VPB channel. I configure the same way as in zapata.conf ( callgroup=1 pickupgroup=1). The result is, the phone can only be picked up by other SIP phone under the same group. If we called that SIP phone and tried to pick up using VPB channel, it cannot pick up the call. Is anyone has the solution? Thanks.

More than one hundred messages related to *8 or call pickup problem in last 6 months!! Please someone in the development team could clarify this and make himself responsible for the response. By now It seems a bad joke. We have spent thousand dollars with hardware, sip phones, working men hours, and with digium stuff (E1, fxo, fxs cards etc) and we have had the *8 problem (sip callee ringing

For some reason, I can't get call pickup to work between Sip phones or between Sip and Zap phones. All phones are in the same call group and pickup group (1). The source code was downloaded and built as of today 11/15/03. Here's what's in sip.conf: [general] port=5060 bindaddr=192.168.17.2 tos=lowdelay disallow=all allow=ulaw context=aliens ; ; SIP Entry for sipura line 1 ; This

Hello, We are using asterisk 0.4.0 on debian sid with Cisco 7960 and ATA186 phones. All sip entries have: callgroup=1 pickupgroup=1 However I am unable to remotely pickup a ringing phone using *8#. I get fast busy tone. Is there some flag to add in extensions.conf ? Thanks in advance,