similar to: who changed the codec?

Hello all I've discovered that SIP channels sometimes get stuck in *. I've read some posts from Fri 29 Aug 2003 which mentions this issue, but there doesn't seem to be any final answers I don't know if this is related to the 0001604 bug? Below is a list from one of the incidents: I know the (d) means that it is scheduled for destruction but the 10.1.1.45 channel hasn't

Hi, I am using Trxibox 2.6 latest ISO install. Following is the output of : "sip show channels" [trixbox ~]# /usr/sbin/asterisk -rx "sip show channels" Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message 212.53.40.40 0218245 6cfb845d050 09011/00000 0x0 (nothing) No 192.168.1.116 (None) YTc4ZmM3NjV 00101/00006 0x0

Hi! I'm trying an asterisk-FWD connection. I'm using X-Lite OR SIPPS as the IP phone. I configured the X-Lite and SIPPS to use GSM codec. Whe I call FWD, I get this info on the channels when the call has not been stablished yet: sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Lag Jitter Format 192.246.69.223 613 1770bf3430d 00102/00000

Hi all, i'm trouble with codec setup on an asterisk machine 1.4.18 and some Thomson ST2030 as extensions. In the users.conf file for internal extension i have: disallow=all allow=g729 allow=alaw allow=ulaw Without any codec installed (i mean with original g729 of asterisk) all go fine, calling from an extension to one other: Peer User/ANR Call ID Seq (Tx/Rx) Format

I am using Asterisk 1.4.18 with 70 various Polycoms, 12 analog, and 18 Spectralink wireless IP phones. Most of the Spectralink phones have entries in 'sip show channels' that do not go away. None of the other phones do this. Is there anyway to remove these entries without restarting Asterisk? Any ideas on what could be done to prevent this? Example output: xxx.xxx.xxx.xxx 541

I am using a2billing as calling card platform with asterisk 1.2.17. After running for several days, if I issue 'sip show channels' command, I got a lot of dead sip channels although 'show channels' command only show 5 channels. What cause these dead channels? How can I clean out these dead channels? Will they pose any problem to my * server if left alone? What does this (d) mean?

Through my Asterisk server, I am trying to use IAXTel to dial 800-type numbers (yes, I know I can do the same thing with FWD and others via SIP, but I wanted to play with IAX a little). It appears I'm running into some sort of a codec mismatch or something because it's not working right. The SIP client is a SPA-3000. In iax.conf, I have something like the following: [General]

Hi all, Below is what I did to run Asterisk in pass-thru mode: sip.conf: [general] disallow=all allow=ulaw canreinvite=yes For each channel, canreinvite=yes is enabled. No dial command has 't' option. However, it seems that Asterisk still stay in the media path and bridge the 2 end points. Am I missing something??? sip*CLI> show channels Channel (Context Extension

My sip show channels shows some channels active that I can not make sense out of, and they have been that way for days, so I am pretty sure they are orphans. Is there a way to show active CALLS (instead of channels) to try and determine the source? Does the output below provide any clues as to why these channels might show active? Anyone aware of related bugs? The #'s indicate original

Can someone recommend the best way to view current calls in progress on the Asterisk console? Neither the 'show channels' or 'sip show channels' commands are easy to read. hestia*CLI> show channels Channel Location State Application(Data) SIP/2944093-f9e2 (None) Up Bridged Call(SIP/2944079-e7f2) SIP/2944079-e7f2

Hi, one of the sip-extensions we created always returns busy when someone tries to call the phone. The extension itself can place calls. We're using snom360 phones with the latest firmware. On every one of those phones when we register with the sip-extension, we've experienced the same problem. This is the output from sip show channels: Peer User/ANR Call ID Seq

Hello my friends... Currently we are using the following firmware versions on ours aastra 55i: Firmware Information Attribute Value Firmware Version 2.1.0.2145 Firmware Release Code SIP Boot Version 2.0.1.1055 Date/Time Jun 20 2007 06:20:29 Can we make a firmware upgrade to the latest one: 6755i (55i) SIP, V2.5.3.18, January 2010 , English , ZIP , 2,849 KB on the site:

Hi all, I have a Cisco 1760 gateway and and Cisco 7960 VoIP phone running via Asterisk. Both are running g711A codecs and SIP. On inbound calls I get a native bridge, however on outbound calls I never get a native bridge. With other SIP gateways I do get a native bridge on the outbound call. My sip.conf is as follows: [cisco1760] type=friend context=incoming host=192.168.0.55 insecure=yes nat=no

Hi all, I have a question regarding pending (zombie) SIP sessions: on Asterisk CLI, with command 'sip show channels' , I see two channels in use with callID and other infos detailed; also 'sip show inuse' give me same result (in terms of channels usage): Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message xx.xx.xx.79 209

Hi all! Quite a mystery. The following happened when I was on holiday, and no one else has changed any configs of either Asterisk or the Cisco's in the building... The situation: Incoming works fine on all phones. Outgoing only works from non-Cisco phones. When calling from a Cisco phone to an external phone, all the Cisco-user hears is a ticking crackle and after about a minute the phone

Hi List I have UAs registered with Asterisk and make outbound calls via ITSP1, everything is fine without re-INVITE. When people call 178, the actual number 112233445566 at ITSP1 network will be called. When UA or called telephone (112233445566) hang up, the call and associated channels are cleared. Sip.conf [general] canreinvite=no nat=no [ITSP1] type=peer host=A.B.C.D

I have a user that just got a broadband connection so she could have an extension off our pbx. The service is DSL and uses a speedstream 5200 dsl router. I sent her a Polycom IP300. At first it would not access the config files via ftp so I had tech support walk her through setting the phone's internal IP to be the dmz. This allowed me to set up the phone using the web interface and now

I made the post below earlier today. I'v since removed all NAT from the equation and the problem still persists. Basically I am trying to transfer a call. The transferring phone sends a REFER message to asterisk with a call id that Asterisk doesn't know about. Surely, surely.... someone else must have seen this? hermes*CLI> sip show channels Peer User/ANR Call ID

I've the following situation: Phone A: Codec GSM supported Phone B: Codec iLBC supported in sip.conf: [general] ... disallow=all allow=gsm allow=ilbc allow=alaw allow=ulaw canreinvite=yes ... (There's a lot of other SIP users, that's why I made the default codec list bigger than just GSM and/or ALAW) If phone A calls to phone B the conversation is established at SIP level, but

Hi All. This is on Asterisk 1.2.13 I place a call between 2 SIP phones (with canreinvite=yes, qualify=yes). I reset the phones (so they don't have time to say BYE). Asterisk seems to think that the call is still ongoing. This persists until I do a 'restart now'. asterisk1*CLI> show channels Channel Location State Application(Data) SIP/5301-089fc890