similar to: Hardware Requirement & Setup

Hello all, It 's dificult to explain; The system I need is an box option (based on *), that I would add to an existing PABX (ie: Nortel with 600 ext). I need two E1/T2 card to plug the system between Telco (FT) and PABX (Nortel)! One card for France Telecom Side (E1a) and one other to Nortel Side (E1b). --------- -------- ----------- Telco FT

Trying again... *Summary:* I need to have 2 machines with 4 BRI connections, 2 in NT mode, 2 in TE mode and 1 machines with 2 BRI connections, 1 in NT mode, 1 in TE mode; What card(s) should I put in to these servers? *The long story:* I have 3 locations I want to connect using (*) servers. 1 of those has a single BRI with a Siemens DECT PABX. 1 of those has two BRI's with 2 Siemens DECT

Hi all I've got a setup where I use a Sangoma PRI card driven via Sangoma WanPipe to connect to a legacy Samsung PABX (I'm not sure which model) form Asterisk 1.8.11.0. The reason is the customer has a large installed base of Samsung phones physically connected to it and on each users desk. They did not want to spring for a complete replace of all their Samsung phones with generic, and

I have 3 locations I want to connect using (*) servers. 1 of those has a single BRI with a Siemens DECT PABX. 1 of those has two BRI's with 2 Siemens DECT PABX's, each serving a different area. 1 of those has two BRI's and a 2 port Nova Compact PABX with DECT First step would be to set up the (*) servers and have them interconnected. When all of that works we'd go on to connect

The company that looks after my clients internal phone system has a problem with logging in to the PABX using their data modem. Connection looks like this ISDN PRA from telco -> Asterisk -> SIP Trunk to my clients Asterisk -> my clients Asterisk -> E1 port to his old PABX I am planning to use transfer capabilities on DAHDI channel to my clients PABX. Should I also set it on sip

Hi, sorry for the newbie hardware questions but here it goes scenario - our telco is feeding us e1 thru coax connection (unbalanced) - so the coax feed rx-tx goes to our old pabx using ericsson bp250 - what we wanted to do is to install asterisk in between hence telco<-->asterisk<-->bp250 using asterisk to power up the voip portion the problem is the we are getting crackling sound

Hi, How would one activate/deactivate hardware echo cancellation on the TE406 card? Can it be done per channel? I'm going to run TE406 in the following scenario: ISDN -> TE406 -> PABX I understand from Steve Underwood's site that echo cancellation is not good for faxes (and they do that themselves). So what I want to do and bypass echo cancellation for selected extensions before

Hello all, Just a question, on asterisk box : I looking on the web , for asterisk at large , and 'asterisk future of telephonie' ... If we would like to change our OLD PABX 600 phone with 4 E1, to install a asterisk with full ip phone in SIP, Could we use 1 Box for asterisk with voicemail, zap channels and some agi script ? thanks Fabrice

Hi Rowland, > You could try adding something like this near to the top of > dhcp-dyndns.sh: > > TTL=$(cat /etc/dhcp/dhcpd.conf | grep 'max-lease-time' | awk -F ';' > '{print $1}' | awk '{print $NF}') > > Then replace the '3600' with '$TTL' Users like comments in their config files. Your script: cat /etc/dhcp/dhcpd.conf |

I'm having an issue with CDR. Basically, I expect to have all "legs" of a call having the same linkedid and differing only by the sequence value. That does happen, but I'm getting null dst values after doing an attended transfer. I'm not sure if this is a bug or I'm doing something wrong. I'm running Asterisk 13.2.0. Here's the console log, step by step: First,

Previously incorrectly sent to asterisk-dev list, sorry. I tried today while connected to a Jtec QSIG E1 card, with DAHDISendCallreroutingFacility with the following test dialplan: Extension 4888 is on the Fujitsu [incoming] exten => 8688,1,Answer() exten => 8688,n,Playback(connecting) exten => 8688,n,DAHDISendCallreroutingFacility(4888,8688) exten => 8688,n,Playback(goodbye)

On Thu, 29 Mar 2018 15:01:26 +0100 Sebastian Arcus via samba <samba at lists.samba.org> wrote: > There seems to be a slight issue with the instructions at the > following wiki page: > > https://wiki.samba.org/index.php/Configure_DHCP_to_update_DNS_records_with_BIND9 > > The /usr/local/bin/dhcp-dyndns.sh script seems to use a hardwired > value for the lease expiry time

Hi All, Can Asterisk dial extension which resides in the PABX? (eg. 2000) Sip Phone <-----> Asterisk <------> ATA (FXS) <------> (CO side) PABX <-----> Extension (eg. 1000) (2100 & 2101) can my sip phone call to pabx extension 1000? What will be my dial plan? I know I can connect to 1000 by

On 29/03/18 15:52, Rowland Penny via samba wrote: > On Thu, 29 Mar 2018 15:01:26 +0100 > Sebastian Arcus via samba <samba at lists.samba.org> wrote: > >> There seems to be a slight issue with the instructions at the >> following wiki page: >> >> https://wiki.samba.org/index.php/Configure_DHCP_to_update_DNS_records_with_BIND9 >> >> The

Hi All, I would like to explain the layout that i am trying to achive. I am so helpless on this regard. So here is the story ........ " This is with regard to the setup which you can find at the "Asterisk The Future of Telephony" , chapter 11, page # 196-197, I am attaching the picture for your information. Now I am taking a challenging step to of integrate IP PBX with our

Vinicius Fontes wrote: > Hey guys, I don't know if this is the right place to ask this. I was > thinking about reporting a bug, but maybe it's better to sort out if > this is really a bug or just me being lame. > > I want to record *every* call in my Asterisk box, so I use the > MixMonitor() application like this is my extensions.conf: > > exten =>

All, I'm haveing a bit of trouble getting my head around H.323 and call routing with Gatekeepers, Zones and intra-zone calls - hopefully someone who is more informed in things H.323 will be able to point me in the right direction...? I already have a mature network of Asterisk boxes dotted around the UK and overseas with hundreds of extensions and our own number-plan/dial-plan in the form

Hello all! I was wondering if you can help me a little bit... My boss wants me to do some research in finding which hardware is most used under Linux(ex. Dell servers, Barebones Kits, HP & Compaq servers, etc.) This is just for budgeting issues...he wants to get rid of some old and obsolete hardware we run and wants to know which hardware could be easy to deploy on the server side and

? Dear all, We are connecting the PABX with Application server.What we are trying is that when a nbr 1800 (this is not registered in PABX) is dialled the pabx should route the call to Application server .The PABX should also have intelligence to route the call by itself for its registered clients.For this scenario to work please guide us what are the files we need to change and other necessary

There seems to be a slight issue with the instructions at the following wiki page: https://wiki.samba.org/index.php/Configure_DHCP_to_update_DNS_records_with_BIND9 The /usr/local/bin/dhcp-dyndns.sh script seems to use a hardwired value for the lease expiry time of 3600 - independent of whatever is configured in dhcpd.conf. With the examples provided, it should work, as the example dhcpd.conf