similar to: spandsp & tdm400p - recommended hardware

I've made some modifications to zttest in order to use it as a frame clock accuracy tester / slip detector. I'm not certain if that was it's original purpose, but it seems that a lot of folks try to use it that way. The result is something that I'm calling ztclock for now to help avoid confusion. I'm including the source at the end of this post. You can compile it by placing

Hi, I'm running into issues receiving faxes which, from what I have read, may be caused by frame slips. While I can find many posts saying to investigate it, I can't find any that describe *how* to debug the problem. Tried searching this list as well to no avail. Any pointers would be greatly appreciated. FYI, I'm running wbel, AMP 1.04, spandsp 2pre4. Faxing to a pstn on a

I'm about to build a server. I want to use a P4, and have lotsa RAM, I don't need audio, I do want to do RAID, but I'll do software RAID if hw isn't available for IDE. the RH hardware list seems rather woefully out of date, does anyone have any recommendations for a good motherboard guaranteed to work? I'm looking at ASUS P4P800-E-deluxe which has a driver on the ASUS site

I am using an ASUS P4P800 Deluxe which is a motherboard that has been tested with Asterisk. I am unsure about the PCI slot and IRQ settings in the BIOS and am having problems with a WCFXO card sharing with other devices. Any suggestions on the settings required for Asterisk to avoid IRQ conflicts? Thanks :) -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi I am trying to use Asterisk as a backend to send and receive faxes over analog channels connected to a Siemens HiPath 3550 switch and a TDM400P card. Receiving faxes, including multipage ones, works really fine, we have no issues at all. But when it comes to send faxes using the app_txfax application, spandsp can't send multipage TIFF files for some reason, it stops sending in the

Thanks Mark will try that out! -----Original Message----- From: MF Hulber [mailto:asterisk-admin@hulber.com] Sent: 22 March 2005 05:25 To: Reuben Grech Subject: [info] [Asterisk-Users] :: BIOS Motherboard Settings :: I have the same motherboard. I put the card in the 2nd slot from the bottom. In this slot, if you look at the manual, it will possibly be in conflict with some USB channels. I

I am having classic "frame slip" symptoms on 4 different systems with 4 different providers (all full PRIs, Qwest, XO, Xspedius, and First Digital are the providers). By classic I mean pages cut short. I do not hear clicks on calls however, and faxing from a fax machine plugged into the asterisk box via an fxs port (no VoIP) faxes just fine through the PRI. Also, faxing directly from

Digging further into the FXO cpu spike vs clock issue, I removed the 18.432 MHZ crystal from an FXO card and replaced it with a 20.000 MHZ crystal. This of course forced the zaptel timing way off ~ 93% accurate using ztclock. I then proceeded to modify the wcfxo.c driver source code to set the proper PLL divider values to return the DAA clock back to 8 Khz. I came up with the values of N1=25,

Hi, I need to install (within the next couple of hours) a 1.6.1.11 server with a Digium B410P board. One of this system's DID is dedicated to Fax reception (I don't need to send faxes). As I'm a bit familiar with it, I would like to use spandsp and ReceiveFAX application to enable this feature. For various reasons, I can't really test this configuration. Could you suggest a

Hi, package tiff-v3.5.7 contains the currently recommended version of libtiff in order to run spandsp (fax support for asterisk). Imho tiff-v3.5.7 is not very easy to find in the internet, and maybe will almost disappear, because it is an "old" version, I put it on our little asterisk download page. Maybe it'll help someone. It works fine together with the other asterisk stuff

Hi, People often send me audio logs from spandsp's soft-fax machine, where they have problems with corruption in the middle of a page for most or all of their faxes. Their problems are usually due to frame slips. However, recently I have received audio logs from two people who generally have great success with my software, but who find one or two machine regularly fail to send faxes

TDM04B whit 4 FX0 modules spandsp 2pre18 AMD XP box asterisk@home when i try to send a fax this fails on sender side in a middle of transmition, the receive side(* box) keep working 35 seconds on RxFax command after sender hang up, and no tif file has generated. in other post have a info about frame slips, but not how to resolve it. How i can solve this poblem? thanks David Romero

is /usr/local/sbin/mailfax flagged to 755? ________________________________ Von: asterisk-users-bounces@lists.digium.com im Auftrag von Rob Danz Gesendet: Mi 13.07.2005 17:17 An: asterisk-users@lists.digium.com Betreff: [Asterisk-Users] SpanDSP rxfax, no tiff. Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the

This is what I'm trying to set up: Incoming: PRI-->Cisco VG200-->Cisco Call Manager 3.34 -->(over h.323)--> Asterisk Box Outgoing: Asterisk Box -->(over h.323)--> Cisco Call Manager 3.34 --> Cisco VG200 --> PRI The incoming part seems to work great. The outgoing part does not work quite so well. The pages that go through end up being of random lengths. From what

This is a config issue, at least I hope so. I have a wbel v3 box (same as rhel v3 box) with 2 nics and it acts as both my firewall and my samba server. eth0: WAN (dhclient to my cable modem provider) eth1: LAN (dhcpd for my private network) The relevant part of my /etc/samba/smb.conf looks like this... [global] interfaces = eth1 lo bind interfaces only = yes os level = 99

I'm looking at deploying a new set of servers based around Intel P4 800MHZ FSB processors. Currently I'm looking at the following 2 motherboards and I'm wondering how well supported they are under -STABLE (specificaly the ATA and LAN as well as text mode video) Model Chipset ASUS P4P8X Intel 865P ASUS P4P800 Intel 865PE Also I'm looking for recommendations on Dual Xeon

Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the suggestions in those threads, but still have the same problem. I'm using the CVS Asterisk from July 11, 2005. Redhat FC2 SpanDSP 0.0.2pre18 Libtiff 3.5.7 Digium PCI card 1 FXO, 1FXS. I have a single POTS line coming, but I have 2 numbers and am using

Hello all, I tried sending this message to freebsd-config and freebsd-install, after subscribing to them, but no one answered back... so I am posting my question here. I just downloaded ISO images for 4.8-RELEASE, and prepared them for installation on an brand new ASUS P4P800-based computer. More information about this motherboard and integrated peripherals list, can be found here:

Hello Hamish. I found your message just googling for Suse and sk98lin. Did you solve your problem? I had the same case and only way to restore was to change NIS driver speed settings from AUTO to 10Mb. And it was not related to OS as the same problem is in WXP ( I have dual boot, ASUS P4P800, integrated GB NIS ). Oleg.

Here is my system: POWER SUPPLY 450W ALLIED ATX450P4 R(41) MB NFORCE2 A7N8X DELUXE ASUS RTL(Standard) CPU AMD|2500/333 ATHLON XP BARTON R(Standard) DDRAM 256M|DDR333 PC-2700 -K %(Standard) HD 40GB|WD 7200RPM 8MB WD400JB%(70) VGA ASUS|V8170MAGICII/T 64M MX440SE(58) CD ROM 56X|AOPEN CD-956 RTL(22) Besides the above parts, i have 2 X100P FXO PCI cards, and 1 TDM40B I bought 2 phones from radio