similar to: Asterisk and IAX softphone (firefly) problem/question

G'Day, I have a bit of FireFly problem that hopefully someone has seen before. What happens is if I make to or receive a call from the FireFly network the call will connect successfully. However, around 10 seconds after I answer the call I am disconnected. The weird thing is same thing happens if I make a call. I've had a look at the * console and I can't see that my * PBX drops

Hi Guys, i spent some time to figure this out (since i love how dialplan is written) but i decided to ask for your help guys. i have two asterisk servers one is 1.2 the other is 1.4, from 1.4 (pbx1) to 1.2 (pbx2) i can leave a voice mail without any pb, but from pbx2 to pbx1 it just hang up. in pbx2 extensions.conf: i am using: exten => 8029,1,Dial(IAX2/pbx1/${EXTEN},20,tTWwr) in pbx1, i

Sorry for all the newbie questions. I really appreciate everyone's help today. Okay I've got outgoing and incoming calls working with no echo. yay! Now I'm having an issue with SIP extension to extension calling. Any time I dial another extension it goes right into voice mail. My extensions.conf is pretty small and rough but, here's what I have right now. Most of it was taken

with the below defined in logger.conf on 11.6 cert 6 I am not getting any log message other than notice and warning in any files when doing module reload logger - queue log is the only one that says it restarts *CLI> module reload logger == Parsing '/etc/asterisk/logger.conf': Found Asterisk Queue Logger restarted built fresh box with make samples - added 2 stations, dialing from

I thought it was quite easy to implement but I cannot get one-touch recording to work. Here are the changes what I did: I restarted Asterisk after the change (because reload does not work for changes in features.conf). I press *1 on the Polycom IP600 phone to record a conversation but no new wav file appear in /var/spool/asterisk/monitor or elsewhere. Any suggestions? Here is the console log:

Asterisk isn't playing my voicemail greetings even though they are defined. Below are the relevant configs(from show dialplan) as well as the level 3 verbose messages asterisk is giving. Also a listing of the directory. Asterisk just plays the "The person at extension..." message, not the greetings I have recorded. Thanks -- asterisk*CLI> show dialplan macro-stdexten [

Hello, i am trying to enable call forwarding on asterisk 1.6 with asterisk-gui If i set my stdexten as follows (with the lines i marked) everything seems like working. But if i make any change on asterisk-gui and apply it.. it recreates the macro-stdexten and deletes my configuration regarding to it. So where should i add my call-forward configuration??? Where am i making a mistake??

I'm trying to set up my extensions.conf file using some of the existing macros like stdexten, etc. while at the same time having two logically separate virtual PBX's (with no "default" context) and two trunks coming into separate contexts, i.e. one for residence and one for my at-home business. I noticed, however, that macro-stdexten depends on the "default" context:

I thought it was quite easy to implement but I cannot get one-touch recording to work. Here are the changes what I did: I restarted Asterisk after the change (because reload does not work for changes in features.conf). I press *1 on the Polycom IP600 phone to record a conversation but no new wav file appear in /var/spool/asterisk/monitor or elsewhere. Test A: Outside line calling in

Hi, I am looking at http://www.theschmandts.org/blog/?p=28 to setup missed call notification but i am having issue. following is my dialplan [macro-stdexten] exten => s,1,Dial(${ARG2}) exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER) exten => s-NOANSWER,1,Voicemail(${ARG1},u) ; If

Hello mailinglist, I want to connect Asterisk with OpenBTS and make a call with a mobile phone. I use: Ubuntu 11.10 + Kernel 3.0.22 GnuRadio 3.3.0 Asterisk 1.8.13 OpenBTS 2.8 Nokia Mobile Phone OpenBTS works and I can send sms from the OpenBTS server to the mobile phone. What I also need is a call between Asterisk and OpenBTS. I have also two soft phones which works with Asterisk. And also

Dear All, I can not transfer call in progress. What's wrong with my macro? I think tT flags is enough right? [macro-stdexten] exten => s,1,Set(temp=${DB(CFU/${ARG1})}) ; Get CFU key exten => s,2,Set(DNDStatus=${DB(DND/${ARG1})}) ; Get DND key exten => s,3,GotoIf($["${temp}" = ""]?5) ; If not existing, goto priority 5 exten =>

Dear All I want to integrate sugarcrm and asterisk , so when customer call the call center the agent or extension which answers the call , before pickup the phone and talk to customer , view his/her information if it is available. I do this as described below : 1-Setup login username for sugarcrm for each extension 2-Extension Users will login to the sugarcrm. 3-Develop php script to handle new

Hi, Has anyone managed to create a setup with a Sipura SPA-1001 as a client? Right now I can connect to the device by dialing the extension number but when I try to connect from the phone handset to make an outbound call it gives an unavailable tone. I'm using Line 2 on the SPA-1001 to connect to the local asterisk server, line 1 is used to connect to my VOIP provider until I can get the

Anyone help me here? I am a newbie so be gentle ;-)...... It worked once and then I played with the configs. I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server. Here

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

Hi list, I am running TDM11b + Asterisk-1.4.9 + Zaptel-1.4.4 + Libpri-1.4.1 on CentOS 5. I am having trouble to make my simple IVR extension work, here is relevant config: zapata.conf ---- context=incoming signalling=fxs_ks channel => 4 context=internal signalling=fxo_ks channel => 1 ----- extensions.conf: ---- [office] exten => s,1,Dial(Zap/1,30) [home] exten =>

I've been banging my head on a brick wall for about an hour now trying to understand why the following doesn't work (which is even provided as an example in the distribution!). The goal is to create a voicemail-only extension not associated with a phone. I'd rather not have an extension dedicated to VoicemailMain(), so I would like the user to be able to hit '*' during

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

My dial plan seems to work great - in that when I call extensions 1234 it connects to 1234. Strangely, after the call terminates (the other side hangs up first), Asterisk continues in the same context and then matches to extensions _. which causes an invalid extension error! Why does asterisk not leave the context (called internalmenu) after the remote hangup? Instead, it continues to the