similar to: RE: Issue compiling zaptel on FC 3 kernel 2.6.10-1.737

Ronald, Grandstream products have a one year warrantee. If you don't have any luck with Pulver, contact us and we can probably get your phones exchanged. Please don't assume that your experience with Grandstream is typical. We sell a lot of these phones and the overwhelming majority of the purchasers are very happy with their units. The quality has improved tremendously over the last

-----Original Message----- From: David Petruzzella [mailto:dpetruzz@smartcarpet.com] Sent: Monday, January 17, 2005 12:30 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] RE: Issue compiling zaptel on FC 3 kernel 2.6.10-1.737 I am unable to compile the zaptel drivers on the latest kernel for fc 3, I get the following errors which are listed below if anyone has any suggestions on

All, I have FC3 fedora core 3 and just installed and compiled 2.6.10. after rebooting I attempted to recompile zaptel-1.0.3. I did a make clean then make. I got the following errors. Any suggestions? ------------------------------- /usr/src/digium/zaptel-1.0.3/torisa.c:1139: warning: 'set_tor_base' defined but not used CC [M] /usr/src/digium/zaptel-1.0.3/wcusb.o CC [M]

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031223/62cf404e/attachment.htm -------------- next part -------------- Hello When I tried loading TDM400P module using insmod command, I get following error messages. Is there some problem with my asterisk installation. Please advise. Thanks Tony $insmod wcfxs Using

Am 26.08.2018 um 15:25 schrieb TE Dukes: > Checked maillog: > > Aug 26 09:12:31 ts130 postfix/qmgr[2194]: E5B948331053: from=<fail2ban at palmettodomains.com>, size=469, nrcpt=1 (queue active) > Aug 26 09:12:31 ts130 postfix/smtp[2307]: connect to 127.0.0.1[127.0.0.1]:10024: Connection refused > Aug 26 09:12:32 ts130 postfix/smtp[2307]: E5B948331053: to=<root at

Hi, I got my TDM11B and am trying to get it to work on my PC. However, I'm having difficulty getting the wcfxs driver to load. I've Googled this problem, and while there are others who have ran into the same problem, none of the solutions work for me. I would very much appreciate it if you could suggest things I could try to resolve this problem. Details follow. The PC is somewhat

I have problem with a TDM40B installation. When i modprobe wcfxs the error i get is the following: /lib/modules/2.4.19-4GB/misc/wcfxs.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.19-4GB/misc/wcfxs.o: insmod

Hi! I have just bought the X100P and TDM400P cards to install on my computer to implement the PBX. I also downloaded the newest softwares asterisk_ver0.5.0, libpri_ver0.4.0, and zaptel_ver0.7.0) to install on my computer (Red Hat Linux 8.0). All packages are compiled well. When I use "modprobe" to load drivers (modprobe zaptel, modprobe wcfxo, modprobe wcfxs), the first two (zaptel,

I have problem with a TDM40B installation. When i modprobe wcfxs the error i get is the following: /lib/modules/2.4.19-4GB/misc/wcfxs.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.19-4GB/misc/wcfxs.o: insmod

I've been having trouble with a TDM10B that I installed a few days ago. At first I could not modprobe it at all (getting the errors below). I switched the X100P that was also installed (with a Motorola chip) with one with a Tiger-something chip, and then everything starts up okay. However, after a few hours, the FXS port dies (no battery or anything), and if I try to rmmod & modprobe

hi guys, i got a TDM400P FXS card an everything is fine except for this when i do modprobe wcfxs , the linux shows 2 TigerJet Network Inc Model 300 128k. i don't know why it is showing 2 of them. or is that what it is? ERROR: Freshmaker version: 63 Freshmaker passed register test ProSLIC on module 0 insane (1) 0 should be 2 Module 0: Not installed ProSLIC on module 1 insane (1) 0 cshould be

Hi, I have received a new card TDM400P revision E, from digium. When I tried to modprobe wcfxs it gave me the following errors: Freshmaker version: 63 Freshmaker passed register test ProSLIC on module 0 insane (1) 255 should be 2 Module 0: Not installed ProSLIC on module 1 insane (1) 255 should be 2 Module 1: Not installed ProSLIC on module 2 insane (1) 255 should be 2 Module 2: Not installed

On 08/25/2018 10:20 AM, TE Dukes wrote: > >> Let's go back to pastebin. What are the contents of /etc/nsswitch.conf >> and /etc/hosts, now? >> > Link to pastebin: https://paste.fedoraproject.org/paste/97keKuhV4lMoLZ8DIrYT8w "Hosts: files dns" Try again.? "hosts"

Hi list, I'm trying to set up a TDM40B, but modprobe returns the fowling errors: asterisk:~# modprobe wcfxs ZT_CHANCONFIG failed on channel 1: Invalid argument (22) /lib/modules/2.4.18/misc/wcfxs.o: post-install wcfxs failed /lib/modules/2.4.18/misc/wcfxs.o: insmod wcfxs failed Could someone give me a help? Thanks in advance Eduardo

Is there anything special needed to load up a TDM10B card?? I got the card today.. Took it from the box, put it into a PCI slot.. connected the power to the card and booted the PC.. I have removed the X100P to avoid confusion and I have the following in the config files.. in /etc/zaptel.conf # For the X100P #fxsks=1 # For the TDM10B fxoks=1 in /etc/asterisk/zapata.conf [channels]

Dear all, I am stuck with tracking down an error I get from R CMD check (Windows, R 2.4.0, same error for R 2.2.1): when running R CMD check over a modified version of package relaimpo, I get the following output in install.out: preparing package relaimpo for lazy loading Loading required package: MASS Loading required package: boot Error in parse(file, n, text, prompt) : syntax error at 2193:

Hi I am having some problem forcing my tdm410 to alaw over ulaw, I have 1.6.1.0 asterisk (debian i486) dahdi 1:2.2.0 built with the hardware echo canceller firmware /etc/asterisk/chan_dahdi.conf alaw=1-4 but I have this in the general section, before any channel definition dahdi show channel 1 Default law: ulaw even when i have a call going it is still ulaw Thanks Alex

Need some help with modules.conf, and basic RH9 linux skills. I've installed the new TDM04B 4-port FXO card and its working. After a reboot, when I do lsmod I see the wcfxo module but not the wcfxs even though both are listed modules.conf. If I "modprobe wcfxs", then lsmod has both modules showing. The wcfxs module is the last one in the modules.conf. Is the order of entries

Hello I am (attempting) to run the astlinux version of Asterisk on a VIA embedded platform. I have a TDM04B and pretty sure zaptel.conf and zapata.conf setup OK. They worked fine with same card in traditional PC anyway. I think need the module wcfxs for a Digium TDM04B card. Is this module not part of astlinux? Do I need to download it? Or is it in opt? I see wctdm - but think that is

I need to reopen this discussion because it's impossible to run spandsp (and VoIP) under these circumstances. With zaptel unloaded, I see the following "vmstat 1" output: no swapping, an occasional disk output, +/- 1003 interrupts/sec., less than 10 context switches/sec., CPU idle 100%. A very quiet system. I load modules zaptel and wcfxo, and the system utilization stays the